From patchwork Wed Sep 20 19:10:40 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 142657 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a05:612c:172:b0:3f2:4152:657d with SMTP id h50csp4506201vqi; Wed, 20 Sep 2023 17:02:07 -0700 (PDT) X-Google-Smtp-Source: AGHT+IE2OpLb+RbuhZMIn2emvzuRrcpJvyzFXNPhOYuHfMukgZfpjlK8eM8RpVDN3iQc4goN7AZK X-Received: by 2002:a05:6e02:1bce:b0:34c:f2cb:b2c with SMTP id x14-20020a056e021bce00b0034cf2cb0b2cmr5127529ilv.19.1695254527358; Wed, 20 Sep 2023 17:02:07 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1695254527; cv=none; d=google.com; s=arc-20160816; b=qzeQNMh6gyBxBg4HhkVkLfJxPi1LMTLrllAWcAvG+N8q23mX11m842VSU+EC9imLAW sah3SNNa2ZDkpF+P3VUw5fpZiG/bY0myUjoV2StIxGHqruCAyMs03i+S6knnAUJCp2sH KFEngAk2wyjOE1JeAqQqRP+DqH4TgeTT3OakaLZgVXuQJvHcK9o2jvXBYnxO2WdJ0Vcm jvn7vcdapR5h/5tEVK5oS90sRkR81wj6XdmT8FOViVHP1QKm/JYTNSxkBhue4W3hemFE 83FipvyytLoue/5c9RE0mtwkbVfmPMVdyvsJMPTJLF12nW6xnvRQB8sq1ruQYvJdKZXB aJLA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=ZDWGOcB/XNLWBgvGUvlChtIdjFViSo8WAZuKFQ14Sow=; fh=Dnqcu1G7YxMiPJ+rEGjOOR/MtvfjezykDSRJXQQtmAE=; b=RuXNiIJkZZRbWQWsBP3vdc4fsJgXx8ll5TJhexpS9f8plDWniXiNQl/LkhMdS1vkxH JQsw08PrFgFzk/fhB3fZQWvo7z0TdpNXhzg+OHjFLDr+TWlYOHCAkwf5QjUH5FDXv/Hm QKu1zCPlxKgm8NgNFL5aEw1A/MqPK9ThZ73DbLjMqevEMjZKOKWhUXeApB+0vG91jX6d oK+1S5J5WyKiaaPNvtD1NlyCEvW4ROpPFar1MfOamAm897BDRhqPHXuIhhhYyY328TXI 9wikC/cy8IG96oBJ7daY4u/Ev2lCdMmXCChbN9v5yXu6umWH55ApiVJEHNTL3M0Hxrpx YeGw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@gmail.com header.s=20230601 header.b=YrsI0g48; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=QUARANTINE dis=NONE) header.from=gmail.com Received: from howler.vger.email (howler.vger.email. [23.128.96.34]) by mx.google.com with ESMTPS id bw25-20020a056a00409900b00690dbcb75d8si222650pfb.386.2023.09.20.17.02.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 20 Sep 2023 17:02:07 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34; Authentication-Results: mx.google.com; dkim=pass header.i=@gmail.com header.s=20230601 header.b=YrsI0g48; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=QUARANTINE dis=NONE) header.from=gmail.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by howler.vger.email (Postfix) with ESMTP id DC05082BB1BC; Wed, 20 Sep 2023 12:12:50 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at howler.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230113AbjITTMs (ORCPT + 27 others); Wed, 20 Sep 2023 15:12:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40194 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229832AbjITTMh (ORCPT ); Wed, 20 Sep 2023 15:12:37 -0400 Received: from mail-lf1-x136.google.com (mail-lf1-x136.google.com [IPv6:2a00:1450:4864:20::136]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 89362F5; Wed, 20 Sep 2023 12:12:12 -0700 (PDT) Received: by mail-lf1-x136.google.com with SMTP id 2adb3069b0e04-50307759b65so382986e87.0; Wed, 20 Sep 2023 12:12:12 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1695237131; x=1695841931; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=ZDWGOcB/XNLWBgvGUvlChtIdjFViSo8WAZuKFQ14Sow=; b=YrsI0g48ic1xez8i5oB1I4d6FaCyUQ138ZLmkXbVItsrNiShse2rINhYXQOXMaYdyW 6cynEcMjzHHS7T44P5v3IfSrcQCfERonOEt/ldZpvpUJb03/0edgTK0jXMpdZb9OoY9F lXEbSZSmoyWkoTdYwOHojRuzzUFNL3XmexlkoOyE0qhRBM/65DNNKLSDr3W3/OZOmN8e w2trrJjEQJrdDdDDjpq1xcbOwrscijKZBUZd/bip3g+vG4YMvm3FnOUap12Ln03FiKud 9t6FXwphV8oRQrJHy98lg0z/MDFURmM1zx0AyHHrlS4Ztiogoz3CoG7/g+HGX3EyFfZ1 d2MQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1695237131; x=1695841931; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=ZDWGOcB/XNLWBgvGUvlChtIdjFViSo8WAZuKFQ14Sow=; b=eHjctkvfyja1KXXX5eMae0c7VnxiDZbZ8peqTS2uVDssq5Bno9epGyyZN0LC5d5tzu YoYDJnixFsVzpeY1kwOkNY93Yasi0zahbSqGtJxpRkeRobmoQvVrsqye5hL6MvsBVr/R HQp4LuSmLfMytRGoDsrbvCdEJfstfmOtkovjT7SFZptigKcjuKRazPCCwy4Hd15EsHa1 kjgWeUPAuxPxSNmHAYAITwdrdGW/HUH8uS8GokkW4I3WI3ErOrD+LnN8gVKq8nfLUqMI YO3hM6sUs/yrB8U2aGoNQ0EAwiyaA/d4htGJSctrDvDndIxQsQVsRAMtUeA1I2dXf30u HgDA== X-Gm-Message-State: AOJu0Yyo6re5i8KQAXYoVsnlkgbdm6TqT5D2qBUnRvKwDiJsrjFIEBq7 pA7KGWrsbs19xcrcXga+1sN+2beHxwc= X-Received: by 2002:ac2:4e8b:0:b0:503:442:5957 with SMTP id o11-20020ac24e8b000000b0050304425957mr3155014lfr.41.1695237130497; Wed, 20 Sep 2023 12:12:10 -0700 (PDT) Received: from localhost ([85.26.234.143]) by smtp.gmail.com with ESMTPSA id v26-20020ac2559a000000b0050331960776sm810496lfg.34.2023.09.20.12.12.08 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 20 Sep 2023 12:12:09 -0700 (PDT) From: Serge Semin To: Michal Simek , Alexander Stein , Borislav Petkov , Tony Luck , James Morse , Mauro Carvalho Chehab , Robert Richter Cc: Serge Semin , Punnaiah Choudary Kalluri , Dinh Nguyen , Arnd Bergmann , Greg Kroah-Hartman , linux-arm-kernel@lists.infradead.org, linux-edac@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v4 16/20] EDAC/synopsys: Detach Zynq A05 DDRC support to separate driver Date: Wed, 20 Sep 2023 22:10:40 +0300 Message-ID: <20230920191059.28395-17-fancer.lancer@gmail.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20230920191059.28395-1-fancer.lancer@gmail.com> References: <20230920191059.28395-1-fancer.lancer@gmail.com> MIME-Version: 1.0 X-Spam-Status: No, score=-0.6 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,FREEMAIL_FROM, RCVD_IN_DNSWL_NONE,RCVD_IN_SORBS_WEB,SPF_HELO_NONE,SPF_PASS autolearn=no autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (howler.vger.email [0.0.0.0]); Wed, 20 Sep 2023 12:12:50 -0700 (PDT) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1777603211200103365 X-GMAIL-MSGID: 1777603211200103365 The synopsys_edac.c driver currently supports three memory-controllers: 1. Synopsys DW uMCTL2 DDRC v3.80 (with the ZynqMP-specific params). 2. Xilinx ZynqMP DDRC Synopsys DW uMCTL2 DDRC v2.40. 3. Xilinx Zynq A05 DDR controller. If the first two devices are based on the Synopsys DW uMCTL2 IP-cores (ZynqMP MC is based on the DW uMCTL2 v2.40) the later device has absolutely nothing in common with the Synopsys DW uMCTL2 DDR controllers: the CSRs map is absolutely different; it doesn't support IRQs unlike the Synopsys memory controllers. Having the driver to support so different devices caused implementing an additional level of abstraction, which will be a great deal of obstacle in about to be added comprehensive set of the Synopsys DDR-controller features (DW uCMTL2 IP-core parameters auto-detection, common SDRAM<->phys address translation, multi-ranked memory, ECC scrubber, individual IRQs, DFI alert_n IRQ, and so on). Moreover the original reason of having these devices support living in a single driver hasn't been introduced for all these years: the synopsys_edac.c driver currently supports only a single memory controller detected on the system. So in order to make the Synopsys driver ready for the new features added move the Xilinx Zynq A05 DDRC support into a separate driver: detach the Zynq-specific callbacks, init/probe/remove methods and move them into the new zynq_edac.c driver. The resultant driver will mostly look similar to the code submitted in the initial commit ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") except a few fixes added afterwards. Note several Zynq-specific macros have been used in the DW uMCTL2 DDRC-specific functions. These macros just for a mere coincident have values suitable for the DW uMCTL2 code but their names either partly or fully unrelated with the Synopsys memory controllers. Since these macros are now moved to another driver introduce a new Synopsys-specific ones and fix the places where the macros have been improperly utilized. Signed-off-by: Serge Semin --- Changelog v3: - Drop the no longer used "priv" pointer from the zynq_mc_init() function. (@tbot) --- MAINTAINERS | 1 + drivers/edac/Kconfig | 9 +- drivers/edac/Makefile | 1 + drivers/edac/synopsys_edac.c | 239 ++--------------- drivers/edac/zynq_edac.c | 501 +++++++++++++++++++++++++++++++++++ 5 files changed, 531 insertions(+), 220 deletions(-) create mode 100644 drivers/edac/zynq_edac.c diff --git a/MAINTAINERS b/MAINTAINERS index 53b7ca804465..bd03b98b5e47 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2977,6 +2977,7 @@ F: arch/arm/mach-zynq/ F: drivers/clocksource/timer-cadence-ttc.c F: drivers/cpuidle/cpuidle-zynq.c F: drivers/edac/synopsys_edac.c +F: drivers/edac/zynq_edac.c F: drivers/i2c/busses/i2c-cadence.c F: drivers/i2c/busses/i2c-xiic.c F: drivers/mmc/host/sdhci-of-arasan.c diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 110e99b86a66..eaac35c27e5c 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -487,7 +487,7 @@ config EDAC_ARMADA_XP config EDAC_SYNOPSYS tristate "Synopsys DDR Memory Controller" - depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || ARCH_MXC + depends on ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || ARCH_MXC help Support for error detection and correction on the Synopsys DDR memory controller. @@ -561,4 +561,11 @@ config EDAC_NPCM error detection (in-line ECC in which a section 1/8th of the memory device used to store data is used for ECC storage). +config EDAC_ZYNQ + tristate "Xilinx Zynq A05 DDR Memory Controller" + depends on ARCH_ZYNQ || COMPILE_TEST + help + Support for error detection and correction on the Xilinx Zynq A05 + DDR memory controller. + endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index 61945d3113cc..4f85923e18ec 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -85,4 +85,5 @@ obj-$(CONFIG_EDAC_ASPEED) += aspeed_edac.o obj-$(CONFIG_EDAC_BLUEFIELD) += bluefield_edac.o obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o obj-$(CONFIG_EDAC_NPCM) += npcm_edac.o +obj-$(CONFIG_EDAC_ZYNQ) += zynq_edac.o obj-$(CONFIG_EDAC_ZYNQMP) += zynqmp_edac.o diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c index 62f498b6dfed..783a4df7eeac 100644 --- a/drivers/edac/synopsys_edac.c +++ b/drivers/edac/synopsys_edac.c @@ -30,68 +30,16 @@ #define SYNPS_EDAC_MOD_STRING "synps_edac" #define SYNPS_EDAC_MOD_VER "1" -/* Synopsys DDR memory controller registers that are relevant to ECC */ -#define CTRL_OFST 0x0 -#define T_ZQ_OFST 0xA4 - -/* ECC control register */ -#define ECC_CTRL_OFST 0xC4 -/* ECC log register */ -#define CE_LOG_OFST 0xC8 -/* ECC address register */ -#define CE_ADDR_OFST 0xCC -/* ECC data[31:0] register */ -#define CE_DATA_31_0_OFST 0xD0 - -/* Uncorrectable error info registers */ -#define UE_LOG_OFST 0xDC -#define UE_ADDR_OFST 0xE0 -#define UE_DATA_31_0_OFST 0xE4 - -#define STAT_OFST 0xF0 -#define SCRUB_OFST 0xF4 - -/* Control register bit field definitions */ -#define CTRL_BW_MASK 0xC -#define CTRL_BW_SHIFT 2 - -#define DDRCTL_WDTH_16 1 -#define DDRCTL_WDTH_32 0 - -/* ZQ register bit field definitions */ -#define T_ZQ_DDRMODE_MASK 0x2 - -/* ECC control register bit field definitions */ -#define ECC_CTRL_CLR_CE_ERR 0x2 -#define ECC_CTRL_CLR_UE_ERR 0x1 - -/* ECC correctable/uncorrectable error log register definitions */ -#define LOG_VALID 0x1 -#define CE_LOG_BITPOS_MASK 0xFE -#define CE_LOG_BITPOS_SHIFT 1 - -/* ECC correctable/uncorrectable error address register definitions */ -#define ADDR_COL_MASK 0xFFF -#define ADDR_ROW_MASK 0xFFFF000 -#define ADDR_ROW_SHIFT 12 -#define ADDR_BANK_MASK 0x70000000 -#define ADDR_BANK_SHIFT 28 - -/* ECC statistic register definitions */ -#define STAT_UECNT_MASK 0xFF -#define STAT_CECNT_MASK 0xFF00 -#define STAT_CECNT_SHIFT 8 - -/* ECC scrub register definitions */ -#define SCRUB_MODE_MASK 0x7 -#define SCRUB_MODE_SECDED 0x4 - /* DDR ECC Quirks */ #define DDR_ECC_INTR_SUPPORT BIT(0) #define DDR_ECC_DATA_POISON_SUPPORT BIT(1) #define SYNPS_ZYNQMP_IRQ_REGS BIT(2) -/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */ +/* Synopsys DDR memory controller registers that are relevant to ECC */ + +/* DDRC Master 0 Register */ +#define DDR_MSTR_OFST 0x0 + /* ECC Configuration Registers */ #define ECC_CFG0_OFST 0x70 #define ECC_CFG1_OFST 0x74 @@ -135,16 +83,22 @@ #define ECC_ADDRMAP0_OFFSET 0x200 /* Control register bitfield definitions */ -#define ECC_CTRL_BUSWIDTH_MASK 0x3000 -#define ECC_CTRL_BUSWIDTH_SHIFT 12 +#define ECC_CTRL_CLR_CE_ERR BIT(0) +#define ECC_CTRL_CLR_UE_ERR BIT(1) #define ECC_CTRL_CLR_CE_ERRCNT BIT(2) #define ECC_CTRL_CLR_UE_ERRCNT BIT(3) /* DDR Control Register width definitions */ +#define DDR_MSTR_BUSWIDTH_MASK 0x3000 +#define DDR_MSTR_BUSWIDTH_SHIFT 12 #define DDRCTL_EWDTH_16 2 #define DDRCTL_EWDTH_32 1 #define DDRCTL_EWDTH_64 0 +/* ECC CFG0 register definitions */ +#define ECC_CFG0_MODE_MASK 0x7 +#define ECC_CFG0_MODE_SECDED 0x4 + /* ECC status register definitions */ #define ECC_STAT_UECNT_MASK 0xF0000 #define ECC_STAT_UECNT_SHIFT 16 @@ -342,61 +296,6 @@ struct synps_platform_data { int quirks; }; -/** - * zynq_get_error_info - Get the current ECC error info. - * @priv: DDR memory controller private instance data. - * - * Return: one if there is no error, otherwise zero. - */ -static int zynq_get_error_info(struct synps_edac_priv *priv) -{ - struct synps_ecc_status *p; - u32 regval, clearval = 0; - void __iomem *base; - - base = priv->baseaddr; - p = &priv->stat; - - regval = readl(base + STAT_OFST); - if (!regval) - return 1; - - p->ce_cnt = (regval & STAT_CECNT_MASK) >> STAT_CECNT_SHIFT; - p->ue_cnt = regval & STAT_UECNT_MASK; - - regval = readl(base + CE_LOG_OFST); - if (!(p->ce_cnt && (regval & LOG_VALID))) - goto ue_err; - - p->ceinfo.bitpos = (regval & CE_LOG_BITPOS_MASK) >> CE_LOG_BITPOS_SHIFT; - regval = readl(base + CE_ADDR_OFST); - p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT; - p->ceinfo.col = regval & ADDR_COL_MASK; - p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT; - p->ceinfo.data = readl(base + CE_DATA_31_0_OFST); - edac_dbg(3, "CE bit position: %d data: %d\n", p->ceinfo.bitpos, - p->ceinfo.data); - clearval = ECC_CTRL_CLR_CE_ERR; - -ue_err: - regval = readl(base + UE_LOG_OFST); - if (!(p->ue_cnt && (regval & LOG_VALID))) - goto out; - - regval = readl(base + UE_ADDR_OFST); - p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT; - p->ueinfo.col = regval & ADDR_COL_MASK; - p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT; - p->ueinfo.data = readl(base + UE_DATA_31_0_OFST); - clearval |= ECC_CTRL_CLR_UE_ERR; - -out: - writel(clearval, base + ECC_CTRL_OFST); - writel(0x0, base + ECC_CTRL_OFST); - - return 0; -} - /** * zynqmp_get_error_info - Get the current ECC error info. * @priv: DDR memory controller private instance data. @@ -615,37 +514,6 @@ static void check_errors(struct mem_ctl_info *mci) handle_error(mci, &priv->stat); } -/** - * zynq_get_dtype - Return the controller memory width. - * @base: DDR memory controller base address. - * - * Get the EDAC device type width appropriate for the current controller - * configuration. - * - * Return: a device type width enumeration. - */ -static enum dev_type zynq_get_dtype(const void __iomem *base) -{ - enum dev_type dt; - u32 width; - - width = readl(base + CTRL_OFST); - width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT; - - switch (width) { - case DDRCTL_WDTH_16: - dt = DEV_X2; - break; - case DDRCTL_WDTH_32: - dt = DEV_X4; - break; - default: - dt = DEV_UNKNOWN; - } - - return dt; -} - /** * zynqmp_get_dtype - Return the controller memory width. * @base: DDR memory controller base address. @@ -659,7 +527,7 @@ static enum dev_type zynqmp_get_dtype(const void __iomem *base) { u32 regval; - regval = readl(base + CTRL_OFST); + regval = readl(base + DDR_MSTR_OFST); if (!(regval & MEM_TYPE_DDR4)) return DEV_UNKNOWN; @@ -678,30 +546,6 @@ static enum dev_type zynqmp_get_dtype(const void __iomem *base) return DEV_UNKNOWN; } -/** - * zynq_get_ecc_state - Return the controller ECC enable/disable status. - * @base: DDR memory controller base address. - * - * Get the ECC enable/disable status of the controller. - * - * Return: true if enabled, otherwise false. - */ -static bool zynq_get_ecc_state(void __iomem *base) -{ - enum dev_type dt; - u32 ecctype; - - dt = zynq_get_dtype(base); - if (dt == DEV_UNKNOWN) - return false; - - ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK; - if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2)) - return true; - - return false; -} - /** * zynqmp_get_ecc_state - Return the controller ECC enable/disable status. * @base: DDR memory controller base address. @@ -714,9 +558,9 @@ static bool zynqmp_get_ecc_state(void __iomem *base) { u32 regval; - regval = readl(base + ECC_CFG0_OFST) & SCRUB_MODE_MASK; + regval = readl(base + ECC_CFG0_OFST) & ECC_CFG0_MODE_MASK; - return (regval == SCRUB_MODE_SECDED); + return (regval == ECC_CFG0_MODE_SECDED); } /** @@ -733,30 +577,6 @@ static u32 get_memsize(void) return inf.totalram * inf.mem_unit; } -/** - * zynq_get_mtype - Return the controller memory type. - * @base: Synopsys ECC status structure. - * - * Get the EDAC memory type appropriate for the current controller - * configuration. - * - * Return: a memory type enumeration. - */ -static enum mem_type zynq_get_mtype(const void __iomem *base) -{ - enum mem_type mt; - u32 memtype; - - memtype = readl(base + T_ZQ_OFST); - - if (memtype & T_ZQ_DDRMODE_MASK) - mt = MEM_DDR3; - else - mt = MEM_DDR2; - - return mt; -} - /** * zynqmp_get_mtype - Returns controller memory type. * @base: Synopsys ECC status structure. @@ -771,7 +591,7 @@ static enum mem_type zynqmp_get_mtype(const void __iomem *base) enum mem_type mt; u32 memtype; - memtype = readl(base + CTRL_OFST); + memtype = readl(base + DDR_MSTR_OFST); if ((memtype & MEM_TYPE_DDR3) || (memtype & MEM_TYPE_LPDDR3)) mt = MEM_DDR3; @@ -883,14 +703,6 @@ static int setup_irq(struct mem_ctl_info *mci, return 0; } -static const struct synps_platform_data zynq_edac_def = { - .get_error_info = zynq_get_error_info, - .get_mtype = zynq_get_mtype, - .get_dtype = zynq_get_dtype, - .get_ecc_state = zynq_get_ecc_state, - .quirks = 0, -}; - static const struct synps_platform_data zynqmp_edac_def = { .get_error_info = zynqmp_get_error_info, .get_mtype = zynqmp_get_mtype, @@ -917,10 +729,6 @@ static const struct synps_platform_data synopsys_edac_def = { static const struct of_device_id synps_edac_match[] = { - { - .compatible = "xlnx,zynq-ddrc-a05", - .data = (void *)&zynq_edac_def - }, { .compatible = "xlnx,zynqmp-ddrc-2.40a", .data = (void *)&zynqmp_edac_def @@ -1142,8 +950,8 @@ static void setup_column_address_map(struct synps_edac_priv *priv, u32 *addrmap) u32 width, memtype; int index; - memtype = readl(priv->baseaddr + CTRL_OFST); - width = (memtype & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT; + memtype = readl(priv->baseaddr + DDR_MSTR_OFST); + width = (memtype & DDR_MSTR_BUSWIDTH_MASK) >> DDR_MSTR_BUSWIDTH_SHIFT; priv->col_shift[0] = 0; priv->col_shift[1] = 1; @@ -1338,7 +1146,7 @@ static int mc_probe(struct platform_device *pdev) layers[1].size = SYNPS_EDAC_NR_CHANS; layers[1].is_virt_csrow = false; - mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + mci = edac_mc_alloc(EDAC_AUTO_MC_NUM, ARRAY_SIZE(layers), layers, sizeof(struct synps_edac_priv)); if (!mci) { edac_printk(KERN_ERR, EDAC_MC, @@ -1380,13 +1188,6 @@ static int mc_probe(struct platform_device *pdev) setup_address_map(priv); #endif - /* - * Start capturing the correctable and uncorrectable errors. A write of - * 0 starts the counters. - */ - if (!(priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)) - writel(0x0, baseaddr + ECC_CTRL_OFST); - return rc; free_edac_mc: diff --git a/drivers/edac/zynq_edac.c b/drivers/edac/zynq_edac.c new file mode 100644 index 000000000000..0781e69e019c --- /dev/null +++ b/drivers/edac/zynq_edac.c @@ -0,0 +1,501 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Zynq DDR ECC Driver + * This driver is based on ppc4xx_edac.c drivers + * + * Copyright (C) 2012 - 2014 Xilinx, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "edac_module.h" + +/* Number of cs_rows needed per memory controller */ +#define ZYNQ_EDAC_NR_CSROWS 1 + +/* Number of channels per memory controller */ +#define ZYNQ_EDAC_NR_CHANS 1 + +/* Granularity of reported error in bytes */ +#define ZYNQ_EDAC_ERR_GRAIN 1 + +#define ZYNQ_EDAC_MSG_SIZE 256 + +#define ZYNQ_EDAC_MOD_STRING "zynq_edac" +#define ZYNQ_EDAC_MOD_VER "1" + +/* Zynq DDR memory controller ECC registers */ +#define ZYNQ_CTRL_OFST 0x0 +#define ZYNQ_T_ZQ_OFST 0xA4 + +/* ECC control register */ +#define ZYNQ_ECC_CTRL_OFST 0xC4 +/* ECC log register */ +#define ZYNQ_CE_LOG_OFST 0xC8 +/* ECC address register */ +#define ZYNQ_CE_ADDR_OFST 0xCC +/* ECC data[31:0] register */ +#define ZYNQ_CE_DATA_31_0_OFST 0xD0 + +/* Uncorrectable error info registers */ +#define ZYNQ_UE_LOG_OFST 0xDC +#define ZYNQ_UE_ADDR_OFST 0xE0 +#define ZYNQ_UE_DATA_31_0_OFST 0xE4 + +#define ZYNQ_STAT_OFST 0xF0 +#define ZYNQ_SCRUB_OFST 0xF4 + +/* Control register bit field definitions */ +#define ZYNQ_CTRL_BW_MASK 0xC +#define ZYNQ_CTRL_BW_SHIFT 2 + +#define ZYNQ_DDRCTL_WDTH_16 1 +#define ZYNQ_DDRCTL_WDTH_32 0 + +/* ZQ register bit field definitions */ +#define ZYNQ_T_ZQ_DDRMODE_MASK 0x2 + +/* ECC control register bit field definitions */ +#define ZYNQ_ECC_CTRL_CLR_CE_ERR 0x2 +#define ZYNQ_ECC_CTRL_CLR_UE_ERR 0x1 + +/* ECC correctable/uncorrectable error log register definitions */ +#define ZYNQ_LOG_VALID 0x1 +#define ZYNQ_CE_LOG_BITPOS_MASK 0xFE +#define ZYNQ_CE_LOG_BITPOS_SHIFT 1 + +/* ECC correctable/uncorrectable error address register definitions */ +#define ZYNQ_ADDR_COL_MASK 0xFFF +#define ZYNQ_ADDR_ROW_MASK 0xFFFF000 +#define ZYNQ_ADDR_ROW_SHIFT 12 +#define ZYNQ_ADDR_BANK_MASK 0x70000000 +#define ZYNQ_ADDR_BANK_SHIFT 28 + +/* ECC statistic register definitions */ +#define ZYNQ_STAT_UECNT_MASK 0xFF +#define ZYNQ_STAT_CECNT_MASK 0xFF00 +#define ZYNQ_STAT_CECNT_SHIFT 8 + +/* ECC scrub register definitions */ +#define ZYNQ_SCRUB_MODE_MASK 0x7 +#define ZYNQ_SCRUB_MODE_SECDED 0x4 + +/** + * struct zynq_ecc_error_info - ECC error log information. + * @row: Row number. + * @col: Column number. + * @bank: Bank number. + * @bitpos: Bit position. + * @data: Data causing the error. + */ +struct zynq_ecc_error_info { + u32 row; + u32 col; + u32 bank; + u32 bitpos; + u32 data; +}; + +/** + * struct zynq_ecc_status - ECC status information to report. + * @ce_cnt: Correctable error count. + * @ue_cnt: Uncorrectable error count. + * @ceinfo: Correctable error log information. + * @ueinfo: Uncorrectable error log information. + */ +struct zynq_ecc_status { + u32 ce_cnt; + u32 ue_cnt; + struct zynq_ecc_error_info ceinfo; + struct zynq_ecc_error_info ueinfo; +}; + +/** + * struct zynq_edac_priv - DDR memory controller private instance data. + * @baseaddr: Base address of the DDR controller. + * @message: Buffer for framing the event specific info. + * @stat: ECC status information. + */ +struct zynq_edac_priv { + void __iomem *baseaddr; + char message[ZYNQ_EDAC_MSG_SIZE]; + struct zynq_ecc_status stat; +}; + +/** + * zynq_get_error_info - Get the current ECC error info. + * @priv: DDR memory controller private instance data. + * + * Return: one if there is no error, otherwise zero. + */ +static int zynq_get_error_info(struct zynq_edac_priv *priv) +{ + struct zynq_ecc_status *p; + u32 regval, clearval = 0; + void __iomem *base; + + base = priv->baseaddr; + p = &priv->stat; + + regval = readl(base + ZYNQ_STAT_OFST); + if (!regval) + return 1; + + p->ce_cnt = (regval & ZYNQ_STAT_CECNT_MASK) >> ZYNQ_STAT_CECNT_SHIFT; + p->ue_cnt = regval & ZYNQ_STAT_UECNT_MASK; + + regval = readl(base + ZYNQ_CE_LOG_OFST); + if (!(p->ce_cnt && (regval & ZYNQ_LOG_VALID))) + goto ue_err; + + p->ceinfo.bitpos = (regval & ZYNQ_CE_LOG_BITPOS_MASK) >> ZYNQ_CE_LOG_BITPOS_SHIFT; + regval = readl(base + ZYNQ_CE_ADDR_OFST); + p->ceinfo.row = (regval & ZYNQ_ADDR_ROW_MASK) >> ZYNQ_ADDR_ROW_SHIFT; + p->ceinfo.col = regval & ZYNQ_ADDR_COL_MASK; + p->ceinfo.bank = (regval & ZYNQ_ADDR_BANK_MASK) >> ZYNQ_ADDR_BANK_SHIFT; + p->ceinfo.data = readl(base + ZYNQ_CE_DATA_31_0_OFST); + edac_dbg(3, "CE bit position: %d data: %d\n", p->ceinfo.bitpos, + p->ceinfo.data); + clearval = ZYNQ_ECC_CTRL_CLR_CE_ERR; + +ue_err: + regval = readl(base + ZYNQ_UE_LOG_OFST); + if (!(p->ue_cnt && (regval & ZYNQ_LOG_VALID))) + goto out; + + regval = readl(base + ZYNQ_UE_ADDR_OFST); + p->ueinfo.row = (regval & ZYNQ_ADDR_ROW_MASK) >> ZYNQ_ADDR_ROW_SHIFT; + p->ueinfo.col = regval & ZYNQ_ADDR_COL_MASK; + p->ueinfo.bank = (regval & ZYNQ_ADDR_BANK_MASK) >> ZYNQ_ADDR_BANK_SHIFT; + p->ueinfo.data = readl(base + ZYNQ_UE_DATA_31_0_OFST); + clearval |= ZYNQ_ECC_CTRL_CLR_UE_ERR; + +out: + writel(clearval, base + ZYNQ_ECC_CTRL_OFST); + writel(0x0, base + ZYNQ_ECC_CTRL_OFST); + + return 0; +} + +/** + * handle_error - Handle Correctable and Uncorrectable errors. + * @mci: EDAC memory controller instance. + * @p: Zynq ECC status structure. + * + * Handles ECC correctable and uncorrectable errors. + */ +static void zynq_handle_error(struct mem_ctl_info *mci, struct zynq_ecc_status *p) +{ + struct zynq_edac_priv *priv = mci->pvt_info; + struct zynq_ecc_error_info *pinf; + + if (p->ce_cnt) { + pinf = &p->ceinfo; + + snprintf(priv->message, ZYNQ_EDAC_MSG_SIZE, + "Row %d Bank %d Col %d Bit %d Data 0x%08x", + pinf->row, pinf->bank, pinf->col, + pinf->bitpos, pinf->data); + + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, + p->ce_cnt, 0, 0, 0, 0, 0, -1, + priv->message, ""); + } + + if (p->ue_cnt) { + pinf = &p->ueinfo; + + snprintf(priv->message, ZYNQ_EDAC_MSG_SIZE, + "Row %d Bank %d Col %d", + pinf->row, pinf->bank, pinf->col); + + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, + p->ue_cnt, 0, 0, 0, 0, 0, -1, + priv->message, ""); + } + + memset(p, 0, sizeof(*p)); +} + +/** + * check_errors - Check controller for ECC errors. + * @mci: EDAC memory controller instance. + * + * Check and post ECC errors. Called by the polling thread. + */ +static void zynq_check_errors(struct mem_ctl_info *mci) +{ + struct zynq_edac_priv *priv = mci->pvt_info; + int status; + + status = zynq_get_error_info(priv); + if (status) + return; + + zynq_handle_error(mci, &priv->stat); +} + +/** + * zynq_get_dtype - Return the controller memory width. + * @base: DDR memory controller base address. + * + * Get the EDAC device type width appropriate for the current controller + * configuration. + * + * Return: a device type width enumeration. + */ +static enum dev_type zynq_get_dtype(const void __iomem *base) +{ + enum dev_type dt; + u32 width; + + width = readl(base + ZYNQ_CTRL_OFST); + width = (width & ZYNQ_CTRL_BW_MASK) >> ZYNQ_CTRL_BW_SHIFT; + + switch (width) { + case ZYNQ_DDRCTL_WDTH_16: + dt = DEV_X2; + break; + case ZYNQ_DDRCTL_WDTH_32: + dt = DEV_X4; + break; + default: + dt = DEV_UNKNOWN; + } + + return dt; +} + +/** + * zynq_get_ecc_state - Return the controller ECC enable/disable status. + * @base: DDR memory controller base address. + * + * Get the ECC enable/disable status of the controller. + * + * Return: true if enabled, otherwise false. + */ +static bool zynq_get_ecc_state(void __iomem *base) +{ + enum dev_type dt; + u32 ecctype; + + dt = zynq_get_dtype(base); + if (dt == DEV_UNKNOWN) + return false; + + ecctype = readl(base + ZYNQ_SCRUB_OFST) & ZYNQ_SCRUB_MODE_MASK; + if ((ecctype == ZYNQ_SCRUB_MODE_SECDED) && (dt == DEV_X2)) + return true; + + return false; +} + +/** + * zynq_get_memsize - Read the size of the attached memory device. + * + * Return: the memory size in bytes. + */ +static u32 zynq_get_memsize(void) +{ + struct sysinfo inf; + + si_meminfo(&inf); + + return inf.totalram * inf.mem_unit; +} + +/** + * zynq_get_mtype - Return the controller memory type. + * @base: Zynq ECC status structure. + * + * Get the EDAC memory type appropriate for the current controller + * configuration. + * + * Return: a memory type enumeration. + */ +static enum mem_type zynq_get_mtype(const void __iomem *base) +{ + enum mem_type mt; + u32 memtype; + + memtype = readl(base + ZYNQ_T_ZQ_OFST); + + if (memtype & ZYNQ_T_ZQ_DDRMODE_MASK) + mt = MEM_DDR3; + else + mt = MEM_DDR2; + + return mt; +} + +/** + * zynq_init_csrows - Initialize the csrow data. + * @mci: EDAC memory controller instance. + * + * Initialize the chip select rows associated with the EDAC memory + * controller instance. + */ +static void zynq_init_csrows(struct mem_ctl_info *mci) +{ + struct zynq_edac_priv *priv = mci->pvt_info; + struct csrow_info *csi; + struct dimm_info *dimm; + u32 size, row; + int j; + + for (row = 0; row < mci->nr_csrows; row++) { + csi = mci->csrows[row]; + size = zynq_get_memsize(); + + for (j = 0; j < csi->nr_channels; j++) { + dimm = csi->channels[j]->dimm; + dimm->edac_mode = EDAC_SECDED; + dimm->mtype = zynq_get_mtype(priv->baseaddr); + dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels; + dimm->grain = ZYNQ_EDAC_ERR_GRAIN; + dimm->dtype = zynq_get_dtype(priv->baseaddr); + } + } +} + +/** + * zynq_mc_init - Initialize one driver instance. + * @mci: EDAC memory controller instance. + * @pdev: platform device. + * + * Perform initialization of the EDAC memory controller instance and + * related driver-private data associated with the memory controller the + * instance is bound to. + */ +static void zynq_mc_init(struct mem_ctl_info *mci, struct platform_device *pdev) +{ + mci->pdev = &pdev->dev; + platform_set_drvdata(pdev, mci); + + /* Initialize controller capabilities and configuration */ + mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->scrub_cap = SCRUB_FLAG_HW_SRC; + mci->scrub_mode = SCRUB_NONE; + + mci->edac_cap = EDAC_FLAG_SECDED; + mci->ctl_name = "zynq_ddr_controller"; + mci->dev_name = ZYNQ_EDAC_MOD_STRING; + mci->mod_name = ZYNQ_EDAC_MOD_VER; + + edac_op_state = EDAC_OPSTATE_POLL; + mci->edac_check = zynq_check_errors; + + mci->ctl_page_to_phys = NULL; + + zynq_init_csrows(mci); +} + +/** + * zynq_mc_probe - Check controller and bind driver. + * @pdev: platform device. + * + * Probe a specific controller instance for binding with the driver. + * + * Return: 0 if the controller instance was successfully bound to the + * driver; otherwise, < 0 on error. + */ +static int zynq_mc_probe(struct platform_device *pdev) +{ + struct edac_mc_layer layers[2]; + struct zynq_edac_priv *priv; + struct mem_ctl_info *mci; + void __iomem *baseaddr; + int rc; + + baseaddr = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(baseaddr)) + return PTR_ERR(baseaddr); + + if (!zynq_get_ecc_state(baseaddr)) { + edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n"); + return -ENXIO; + } + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = ZYNQ_EDAC_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = ZYNQ_EDAC_NR_CHANS; + layers[1].is_virt_csrow = false; + + mci = edac_mc_alloc(EDAC_AUTO_MC_NUM, ARRAY_SIZE(layers), layers, + sizeof(struct zynq_edac_priv)); + if (!mci) { + edac_printk(KERN_ERR, EDAC_MC, + "Failed memory allocation for mc instance\n"); + return -ENOMEM; + } + + priv = mci->pvt_info; + priv->baseaddr = baseaddr; + + zynq_mc_init(mci, pdev); + + rc = edac_mc_add_mc(mci); + if (rc) { + edac_printk(KERN_ERR, EDAC_MC, + "Failed to register with EDAC core\n"); + goto free_edac_mc; + } + + /* + * Start capturing the correctable and uncorrectable errors. A write of + * 0 starts the counters. + */ + writel(0x0, baseaddr + ZYNQ_ECC_CTRL_OFST); + + return 0; + +free_edac_mc: + edac_mc_free(mci); + + return rc; +} + +/** + * zynq_mc_remove - Unbind driver from controller. + * @pdev: Platform device. + * + * Return: Unconditionally 0 + */ +static int zynq_mc_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + + return 0; +} + +static const struct of_device_id zynq_edac_match[] = { + { .compatible = "xlnx,zynq-ddrc-a05" }, + {} +}; +MODULE_DEVICE_TABLE(of, zynq_edac_match); + +static struct platform_driver zynq_edac_mc_driver = { + .driver = { + .name = "zynq-edac", + .of_match_table = zynq_edac_match, + }, + .probe = zynq_mc_probe, + .remove = zynq_mc_remove, +}; +module_platform_driver(zynq_edac_mc_driver); + +MODULE_AUTHOR("Xilinx Inc"); +MODULE_DESCRIPTION("Zynq DDR ECC driver"); +MODULE_LICENSE("GPL v2");