[v3,05/17] pmdomain: bcm: Move Kconfig options to the pmdomain subsystem
Commit Message
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-rpi-kernel@lists.infradead.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
Changes in v3:
- Dropped the SOC_BCM63XX config altogether.
---
drivers/pmdomain/Kconfig | 1 +
drivers/pmdomain/bcm/Kconfig | 42 +++++++++++++++++++++++++++++
drivers/soc/bcm/Kconfig | 51 ------------------------------------
3 files changed, 43 insertions(+), 51 deletions(-)
create mode 100644 drivers/pmdomain/bcm/Kconfig
@@ -4,5 +4,6 @@ menu "PM Domains"
source "drivers/pmdomain/actions/Kconfig"
source "drivers/pmdomain/amlogic/Kconfig"
source "drivers/pmdomain/apple/Kconfig"
+source "drivers/pmdomain/bcm/Kconfig"
endmenu
new file mode 100644
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Broadcom PM Domains"
+
+config BCM2835_POWER
+ bool "BCM2835 power domain driver"
+ depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
+ default y if ARCH_BCM2835
+ select PM_GENERIC_DOMAINS if PM
+ select RESET_CONTROLLER
+ help
+ This enables support for the BCM2835 power domains and reset
+ controller. Any usage of power domains by the Raspberry Pi
+ firmware means that Linux usage of the same power domain
+ must be accessed using the RASPBERRYPI_POWER driver
+
+config RASPBERRYPI_POWER
+ bool "Raspberry Pi power domain driver"
+ depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
+ depends on RASPBERRYPI_FIRMWARE=y
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the RPi power domains which can be enabled
+ or disabled via the RPi firmware.
+
+config BCM_PMB
+ bool "Broadcom PMB (Power Management Bus) driver"
+ depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+ default ARCH_BCMBCA
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the Broadcom's PMB (Power Management Bus) that
+ is used for disabling and enabling SoC devices.
+
+config BCM63XX_POWER
+ bool "BCM63xx power domain driver"
+ depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the BCM63xx power domains controller on
+ BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
+
+endmenu
@@ -1,36 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
menu "Broadcom SoC drivers"
-config BCM2835_POWER
- bool "BCM2835 power domain driver"
- depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
- default y if ARCH_BCM2835
- select PM_GENERIC_DOMAINS if PM
- select RESET_CONTROLLER
- help
- This enables support for the BCM2835 power domains and reset
- controller. Any usage of power domains by the Raspberry Pi
- firmware means that Linux usage of the same power domain
- must be accessed using the RASPBERRYPI_POWER driver
-
-config RASPBERRYPI_POWER
- bool "Raspberry Pi power domain driver"
- depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
- depends on RASPBERRYPI_FIRMWARE=y
- select PM_GENERIC_DOMAINS if PM
- help
- This enables support for the RPi power domains which can be enabled
- or disabled via the RPi firmware.
-
-config SOC_BCM63XX
- bool "Broadcom 63xx SoC drivers"
- depends on BMIPS_GENERIC || COMPILE_TEST
- help
- Enables drivers for the Broadcom 63xx series of chips.
- Drivers can be enabled individually within this menu.
-
- If unsure, say N.
-
config SOC_BRCMSTB
bool "Broadcom STB SoC drivers"
depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST
@@ -42,27 +12,6 @@ config SOC_BRCMSTB
If unsure, say N.
-config BCM_PMB
- bool "Broadcom PMB (Power Management Bus) driver"
- depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
- default ARCH_BCMBCA
- select PM_GENERIC_DOMAINS if PM
- help
- This enables support for the Broadcom's PMB (Power Management Bus) that
- is used for disabling and enabling SoC devices.
-
-if SOC_BCM63XX
-
-config BCM63XX_POWER
- bool "BCM63xx power domain driver"
- depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
- select PM_GENERIC_DOMAINS if PM
- help
- This enables support for the BCM63xx power domains controller on
- BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
-
-endif # SOC_BCM63XX
-
source "drivers/soc/bcm/brcmstb/Kconfig"
endmenu