From patchwork Tue Sep 19 12:46:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mihai Sain X-Patchwork-Id: 142056 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a05:612c:172:b0:3f2:4152:657d with SMTP id h50csp3609846vqi; Tue, 19 Sep 2023 11:55:50 -0700 (PDT) X-Google-Smtp-Source: AGHT+IFujYi/EBYv1O5bDm3HzdF7MBgh4uq7uUWOp8z1EnCTrEYBXJKIlEbZa8u+jTEk9XsifnDz X-Received: by 2002:a17:902:d483:b0:1c3:aa8d:4daa with SMTP id c3-20020a170902d48300b001c3aa8d4daamr334920plg.44.1695149750021; Tue, 19 Sep 2023 11:55:50 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1695149750; cv=none; d=google.com; s=arc-20160816; b=D5TtY1ijYRem8PMexgoTZlg0BtjpAql8cgBpaXxBNne1IMRHR3wRgPCjR590f4lr27 OvL2N6tbf126L+mJjlQHEnP1MgL772ZKb72BXGSy8AngMtHgYPQE9CXEG3CwN7fjTcdy ALlPd1RzTFKwbQ90dNTJjWB6vhXqpW13Vp3bB1+Jb3Y2E2Zc5qtc+sAM8bjksS+K9/OA /gezsGM/grNPVWygNwalvjl2cAham6Tnk8bEt4nJxuASepzN+GPN1TO9VKIyrKnnSwb4 3a+yI6dwGjErsqi8HJTEkMPdzhqRaXbwunUMfaGPJlyqZi9He4FmQoZEs+83PhzPCnCa 340A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=W2tjh5yMcg7t7OLR1wutbo9FZuL70xa0eooXpaJS9sU=; fh=oWgnndu1sG/Cq0eLLKIHbv1LDqrqSkBLunDQJX0F5nI=; b=Lc6DrE1L2GCosi+XdwLi+W75VCnOLFPpvsrwmK/YeG7sDzhUXFPHoJvTIhnShrvUy+ jdtuDVlRDyoSYMe4zg95vTQW4Uf9nZw5vGooWjVpwH4BnYkwWteWWJ4vlPxOBwO2pBeN IJpOPFZJjynn3F7Bc50RDP3uefCiwZEshI3I45SzltQrGYqpI9IDPbdlEnAJndi6DCT6 fhy0O/pw8/ew0kVnYbKqgSsoZPDNJpTUhfKy6xkKdU2XE62chYud6PjumLzwpgUp81Eo 90m3HDKRiHo4X+CJGi03/B1Dcpm2XAyZCBqRQLihZu7QVRRVykWRF1Y960v9X3LF8RbX JtqA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@microchip.com header.s=mchp header.b=al5IWZu7; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=microchip.com Received: from snail.vger.email (snail.vger.email. [2620:137:e000::3:7]) by mx.google.com with ESMTPS id o6-20020a170902d4c600b001beef8ccd05si10753356plg.489.2023.09.19.11.55.49 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 19 Sep 2023 11:55:50 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7; Authentication-Results: mx.google.com; dkim=pass header.i=@microchip.com header.s=mchp header.b=al5IWZu7; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=microchip.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by snail.vger.email (Postfix) with ESMTP id 14F89813CD86; Tue, 19 Sep 2023 05:47:08 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at snail.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232270AbjISMrE (ORCPT + 26 others); Tue, 19 Sep 2023 08:47:04 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53936 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232267AbjISMq4 (ORCPT ); Tue, 19 Sep 2023 08:46:56 -0400 Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.153.233]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 277F9181; Tue, 19 Sep 2023 05:46:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1695127594; x=1726663594; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=Y2UuY2VJYxhmOhlmg3jLWigE7n2Uq9xmXn3g8xzqfYE=; b=al5IWZu7voMvxmdseXAPtmsj9qwarl4l4ivMbzrjFJLeooRoAi4IWBdb gSWND0XCzRW+ggK89WPLlbPXFxcHKmepuXWiBpUsDwZegsIxvkxp5K+ML Qydaiya6Cvx95dKZzKSCZqUpSnqwEgPZNccZMjZIG9LjgcAZSyaNdqL2L iw3zR5wkWZvsdkGbTVOav3jfaVhiRvOW/ueRVUtY5VQDG9WJ32bxDqp3t WSvmvceODRTbzlTQnEkxCSsluBIasF33EzZzgPbFYFrF0ge6v8SN392Te PJnxGdHWY6fDs2CCKiSunXk3zNKM2aQ4ymDDf2/uKKpOjxNbanHowqaWM w==; X-CSE-ConnectionGUID: hhj4fQFDRIWzql0Mbek80Q== X-CSE-MsgGUID: ZTuyIVPMSoWdrCxwX9Pe6A== X-ThreatScanner-Verdict: Negative X-IronPort-AV: E=Sophos;i="6.02,159,1688454000"; d="scan'208";a="235961908" X-Amp-Result: SKIPPED(no attachment in message) Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa5.microchip.iphmx.com with ESMTP/TLS/ECDHE-RSA-AES128-GCM-SHA256; 19 Sep 2023 05:46:33 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.21; Tue, 19 Sep 2023 05:46:25 -0700 Received: from virtualbox.microchip.com (10.10.85.11) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.2507.21 via Frontend Transport; Tue, 19 Sep 2023 05:46:22 -0700 From: Mihai Sain To: , , , , , , , , , , , CC: , Mihai Sain Subject: [PATCH v4 2/2] ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board Date: Tue, 19 Sep 2023 15:46:05 +0300 Message-ID: <20230919124606.26898-3-mihai.sain@microchip.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20230919124606.26898-1-mihai.sain@microchip.com> References: <20230919124606.26898-1-mihai.sain@microchip.com> MIME-Version: 1.0 X-Spam-Status: No, score=-4.4 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED, RCVD_IN_MSPIKE_H5,RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_NONE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (snail.vger.email [0.0.0.0]); Tue, 19 Sep 2023 05:47:08 -0700 (PDT) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1777493344447211990 X-GMAIL-MSGID: 1777493344447211990 Add initial device tree file for sama5d29_curiosity board. Signed-off-by: Mihai Sain --- arch/arm/boot/dts/microchip/Makefile | 2 + .../dts/microchip/at91-sama5d29_curiosity.dts | 600 ++++++++++++++++++ 2 files changed, 602 insertions(+) create mode 100644 arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile index 31e03747cdf4..efde9546c8f4 100644 --- a/arch/arm/boot/dts/microchip/Makefile +++ b/arch/arm/boot/dts/microchip/Makefile @@ -4,6 +4,7 @@ DTC_FLAGS_at91-sam9x60_curiosity := -@ DTC_FLAGS_at91-sam9x60ek := -@ DTC_FLAGS_at91-sama5d27_som1_ek := -@ DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@ +DTC_FLAGS_at91-sama5d29_curiosity := -@ DTC_FLAGS_at91-sama5d2_icp := -@ DTC_FLAGS_at91-sama5d2_ptc_ek := -@ DTC_FLAGS_at91-sama5d2_xplained := -@ @@ -64,6 +65,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ at91-sama5d27_wlsom1_ek.dtb \ + at91-sama5d29_curiosity.dtb \ at91-sama5d2_icp.dtb \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts new file mode 100644 index 000000000000..6b02b7bcfd49 --- /dev/null +++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama5d29_curiosity.dts - Device Tree file for SAMA5D29 Curiosity board + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Mihai Sain + * + */ +/dts-v1/; +#include "sama5d29.dtsi" +#include "sama5d2-pinfunc.h" +#include +#include +#include + +/ { + model = "Microchip SAMA5D29 Curiosity"; + compatible = "microchip,sama5d29-curiosity", "atmel,sama5d29", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; // debug + serial1 = &uart1; // RPi + serial2 = &uart3; // mikro BUS 2 + serial3 = &uart4; // mikro BUS 1 + serial4 = &uart6; // flx1 Bluetooth + i2c0 = &i2c0; + i2c1 = &i2c1; + }; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; + stdout-path = "serial0:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + button-1 { + label = "USER BUTTON"; + gpios = <&pioA PIN_PA17 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + led-red { + label = "red"; + gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>; + }; + + led-green { + label = "green"; + gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>; + }; + + led-blue { + label = "blue"; + gpios = <&pioA PIN_PA9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&adc { + vddana-supply = <&vdd_3v3>; + vref-supply = <&vdd_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; +}; + +&flx1 { + atmel,flexcom-mode = ; + status = "okay"; + + uart6: serial@200 { + pinctrl-0 = <&pinctrl_flx1_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "okay"; + + spi6: spi@400 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rpi_spi>; + status = "okay"; + }; +}; + +&i2c0 { + dmas = <0>, <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PC0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-sda-hold-time-ns = <350>; + status = "okay"; + + mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>; + + regulators { + vdd_3v3: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vddio_ddr: VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1200000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1200000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + }; + + vdd_core: VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vdd_ddr: VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pioA { + pinctrl_adc_default: adc-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_adtrg_default: adtrg-default { + pinmux = ; + bias-pull-up; + }; + + pinctrl_can0_default: can0-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can1_default: can1-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_debug_uart: debug-uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_flx1_default: flx1-default { + pinmux = , + , + , + ; + bias-disable; + }; + + pinctrl_i2c0_default: i2c0-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c0_gpio: i2c0-gpio-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_key_gpio_default: key-gpio-default { + pinmux = ; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led-gpio-default { + pinmux = , + , + ; + bias-pull-up; + }; + + pinctrl_mikrobus1_pwm: mikrobus1-pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_pwm: mikrobus2-pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_uart: mikrobus1-uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_mikrobus2_uart: mikrobus2-uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_qspi1_default: qspi1-default { + pinmux = , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_rpi_spi: rpi-spi { + pinmux = , + , + , + , + ; + bias-disable; + }; + + pinctrl_rpi_uart: rpi-uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_sdmmc0_default: sdmmc0-default { + pinmux = , + , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_sdmmc1_default: sdmmc1-default { + pinmux = , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_spi1_default: spi1-default { + pinmux = , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_usb_default: usb-default { + pinmux = ; + bias-disable; + }; + + pinctrl_usba_vbus: usba-vbus { + pinmux = ; + bias-disable; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>; + status = "okay"; +}; + +&qspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_default>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + label = "atmel_qspi1"; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { + label = "bootloader env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + }; +}; + +&sdmmc0 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + disable-wp; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + disable-wp; + status = "okay"; +}; + +&shutdown_controller { + debounce-delay-us = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + status = "okay"; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_debug_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rpi_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus2_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&usb0 { + atmel,vbus-gpio = <&pioA PIN_PB13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioA PIN_PA6 GPIO_ACTIVE_HIGH + 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +};