From patchwork Fri Sep 15 03:11:21 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 140086 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a05:612c:172:b0:3f2:4152:657d with SMTP id h50csp777714vqi; Thu, 14 Sep 2023 20:27:38 -0700 (PDT) X-Google-Smtp-Source: AGHT+IHNCKVBJbIDnkRtz8L3bo0XXRI7qDfKF5pQPJMztVWh4g+K9MrJJ9dNYT21onLffO5MpHEA X-Received: by 2002:a05:6358:709:b0:13d:c0:1b0d with SMTP id e9-20020a056358070900b0013d00c01b0dmr928462rwj.2.1694748458471; Thu, 14 Sep 2023 20:27:38 -0700 (PDT) ARC-Seal: i=2; a=rsa-sha256; t=1694748458; cv=pass; d=google.com; s=arc-20160816; b=ZbUI7/3O36JiQgg1FQ1EQjOoIpTaYf4sloB89iTjNR23ectDYeJ762KNDa3PgIx5qW SKhPt6xR0NCYGJ7F8S3vM7Ao80yFXU0zEcmZojTsvYA9B5ZWUM1es4ivyPy+823kGQY4 8O8aHEenutlBYgD6Y13uBCCi9ABDNKX+PTKnLuXZSmUU9Tw79rQbIkbEwl53yfvrPCk2 GPHbz2lJYF9bkGfpRdLO+mfjYN3CF/beKW/iPKnZyaCp5SxvIT+NRryNG6w72qGysHsU 807oJLgM5x6X1P3zjH3idNLhlTOBofdMsaZ9niIj04NvptrHbbW0tYLQpZGj8pbzaMC1 YbTw== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:references:in-reply-to:message-id :date:subject:cc:to:from; bh=K2XBTr83M9b1TR4vEAsxJ8kiqCI6dJl6F9Z0gK9Z1Io=; fh=vyH9kEXYUjJAh9fsNEjW/lIzIenUROZ949RyEW+JyGA=; b=AAw2PRJShW7Dh99hXTZwEPyDO4t6SVGi/Wk+fk4GIuo3ZLLcaj6RauhdIJqI5a1aWa oSEJT25rPUZl8dtNyTJ/NciwRIFuJTIIfR+uYucof7pXFityrtQxpN6R37Q80b2ZY3cH FK/wyWcvozhCnrSd1wcu9b85ayi73oko2DLLSsw/5yl4KsQzFkn4QuxrXyucN7ZIO1JI DjnvinQdfR5hwCszg53D3d65NL4OLPu+ppWWsSx46N7vmBMEiQbwKpVTwOf54WtaA1So UlA8XwIZ+H4/kU2qB9APSA1OH3+lT9BIDO/PHe/LZmflmsBjplAwmnliZJ12TxJblrs9 Sy9A== ARC-Authentication-Results: i=2; mx.google.com; arc=pass (i=1 spf=pass spfdomain=yunjingtech.com dkim=pass dkdomain=yunjingtech.com dmarc=pass fromdomain=yunjingtech.com); spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=yunjingtech.com Received: from howler.vger.email (howler.vger.email. [23.128.96.34]) by mx.google.com with ESMTPS id bz32-20020a056a02062000b00577f80e6af0si2808341pgb.731.2023.09.14.20.27.37 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 14 Sep 2023 20:27:38 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34; Authentication-Results: mx.google.com; arc=pass (i=1 spf=pass spfdomain=yunjingtech.com dkim=pass dkdomain=yunjingtech.com dmarc=pass fromdomain=yunjingtech.com); spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=yunjingtech.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by howler.vger.email (Postfix) with ESMTP id B7C5585C6ABF; Thu, 14 Sep 2023 20:12:18 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at howler.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231837AbjIODMT (ORCPT + 33 others); Thu, 14 Sep 2023 23:12:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49232 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229767AbjIODMQ (ORCPT ); Thu, 14 Sep 2023 23:12:16 -0400 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01on2112.outbound.protection.outlook.com [40.107.215.112]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AFF6F26A4; Thu, 14 Sep 2023 20:12:11 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=bNr4nSiyfXQzxasy4skvXLHG1toraO3ige6RGaIQe1PNRPwe+OooEBQY4NOGFX3+K8MGOG+bsiq4PyIRCKYwEpRHcJiJy32M9YaLQoC8VFgEMq2lY9wU7n2gP3VE5HQzH15BY3Lab2usub0v9nwZ6PrIHCOR0iGeHNsdOMw3KM8K/XtD6pWPpjepODz8b3QxxjZinvSgedqJFsg4Vcrkqt7HE7GrvWFxbYUyL5J9lzd0knOWziEb39ESqhJEej4K8aD1uKZmIu8/++I6waj3FAycaR5Xxb5tkN5OJrvhj1IldvJWqf5Yrr9PvYakqpnw55sOCw0lTRuWMR5bCVXxxQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=K2XBTr83M9b1TR4vEAsxJ8kiqCI6dJl6F9Z0gK9Z1Io=; b=gXBMWy83zFOzZ4uz6SGMulebNEHsyLMq4AHVnnezhSB/FZg3G3t7V9zXkBrOx0eUsBYFWfIdgPrgO7w1REJWxWA9mYit9lLPdg9Iq57Rfx7tlsDnNd27EMjnQNK0g35lhBShTF3eOOHDehnK/ZEawbcFIxLTtLDdlNJ+ZJNAxe6mOjWmyODtDFF8e2enr4aQwkH8CH3QVrx3za/r2bxAuC9KVTik/RGxjfnOt6Hl3MPJvR2IkbQDQdih5xhr08heG6cOxT3wGpAs4V9vq/fnOpU0zh90a/i07IuILC/ALoEoM2HPXdnYWgS9UOAwP4yZ8jPqIFZQBua+nBY0WOolMw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) by JH0PR06MB6654.apcprd06.prod.outlook.com (2603:1096:990:36::12) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6792.21; Fri, 15 Sep 2023 03:12:07 +0000 Received: from SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::3fe6:a3fc:55d:fba0]) by SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::3fe6:a3fc:55d:fba0%4]) with mapi id 15.20.6792.021; Fri, 15 Sep 2023 03:12:07 +0000 From: "larry.lai" To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, "larry.lai" , Gary Wang Subject: [PATCH V6 1/3] mfd: Add support for UP board CPLD/FPGA Date: Fri, 15 Sep 2023 11:11:21 +0800 Message-Id: <20230915031123.14515-2-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230915031123.14515-1-larry.lai@yunjingtech.com> References: <20230915031123.14515-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: TYCP286CA0099.JPNP286.PROD.OUTLOOK.COM (2603:1096:400:2b4::17) To SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR06MB6507:EE_|JH0PR06MB6654:EE_ X-MS-Office365-Filtering-Correlation-Id: a0a89e7a-de28-48ec-f83e-08dbb5998ad2 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:SEYPR06MB6507.apcprd06.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230031)(366004)(136003)(396003)(39830400003)(346002)(376002)(451199024)(1800799009)(186009)(36756003)(38350700002)(38100700002)(86362001)(52116002)(6666004)(4326008)(6486002)(478600001)(2906002)(30864003)(8936002)(8676002)(41300700001)(5660300002)(6512007)(6506007)(83380400001)(54906003)(316002)(66556008)(66946007)(66476007)(1076003)(2616005)(26005);DIR:OUT;SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: a0a89e7a-de28-48ec-f83e-08dbb5998ad2 X-MS-Exchange-CrossTenant-AuthSource: SEYPR06MB6507.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Sep 2023 03:12:06.8887 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: y2XmXiFgeXOwHdkWpn41TYpUd39HWHUnSyu28M9dH/NkKcGPUwPieqrvdxEKxa5UnCKc7O2lYLt+jbs/FsQ3NBEWDfI1/6CbVNDTUFBltyQ= X-MS-Exchange-Transport-CrossTenantHeadersStamped: JH0PR06MB6654 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (howler.vger.email [0.0.0.0]); Thu, 14 Sep 2023 20:12:18 -0700 (PDT) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1777072559336425904 X-GMAIL-MSGID: 1777072559336425904 The UP Squared board implements certain features (pin control, onboard LEDs or CEC) through an on-board CPLD/FPGA. This driver implements the line protocol to read and write registers from the FPGA through regmap. The register address map is also included. The UP Boards provide a few I/O pin headers (for both GPIO and functions), including a 40-pin Raspberry Pi compatible header. This patch implements support for the FPGA-based pin controller that manages direction and enable state for those header pins. Partial support UP boards: * UP core + CREX * UP core + CRST02 Reported-by: kernel test robot Signed-off-by: Gary Wang Signed-off-by: larry.lai --- PATCH V5 -> PATCH V6 (1) Fixed kernel test robot compiler warning. PATCH V4 -> PATCH V5 (1) Refer 2023/05/25 Lee Jones review, cleaned up coding style and addressed review comments. (2) Synchronizing upboard github to v1.0.5 tag. RFC 2023/04/25 -> PATCH V4 (1) Fixed kernel test robot compiler warning. (2) Remove mistakes with wrong Reviewed-by tags. RFC 2022/11/23 -> RFC 2023/04/25 (1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style and addressed review comments. PATCH V3 -> RFC 2022/11/23: (1) Refer 2022/11/16 Lee Jones review, cleaned up coding style and addressed review comments. (2) Description on the UP Boards FPGA register read/write protocols PATCH V2 -> V3: (1) fixed kernel test robot compiler warning. PATCH V1 -> V2: (1) Synchronizing upboard github to rc2. (2) Refer 2022/10/31 Lee Jones review, fixed some of the issues. --- drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/upboard-fpga.c | 492 +++++++++++++++++++++++++++++++ include/linux/mfd/upboard-fpga.h | 55 ++++ 4 files changed, 560 insertions(+) create mode 100644 drivers/mfd/upboard-fpga.c create mode 100644 include/linux/mfd/upboard-fpga.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index abb58ab1a1a4..1041e937fc7a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2104,6 +2104,18 @@ config MFD_QCOM_PM8008 under it in the device tree. Additional drivers must be enabled in order to use the functionality of the device. +config MFD_INTEL_UPBOARD_FPGA + tristate "Support for the Intel platform foundation kit UP board FPGA" + select MFD_CORE + depends on X86 && ACPI + help + Select this option to enable the Intel AAEON UP and UP^2 on-board FPGA. + This is core driver for the UP board that implements certain (pin + control, onboard LEDs or CEC) through an on-board FPGA. + + To compile this driver as a module, choose M here: the module will be + called upboard-fpga. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 858cacf659d6..8374a05f6f43 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -250,6 +250,7 @@ obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o +obj-$(CONFIG_MFD_INTEL_UPBOARD_FPGA) += upboard-fpga.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o diff --git a/drivers/mfd/upboard-fpga.c b/drivers/mfd/upboard-fpga.c new file mode 100644 index 000000000000..b5c36f9dbfdd --- /dev/null +++ b/drivers/mfd/upboard-fpga.c @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board for control CPLD/FPGA to + * provide more GPIO driving power also provide CPLD LEDs and pin mux function + * recognize HID AANT0F00 ~ AAANT0F04 in ACPI name space + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct upboard_fpga_data { + const struct regmap_config *regmap_config; + const struct mfd_cell *cells; + size_t ncells; +}; + +static struct gpio_led_platform_data pdata; + +#define RESET_DEVICE 1 +#define ENABLE_DEVICE 1 + +#define AAEON_MANUFACTURER_ID 0x01 +#define SUPPORTED_FW_MAJOR 0x0 +#define MENUFACTURER_ID_MASK GENMASK(7, 0) + +#define FIRMWARE_ID_BUILD_OFFSET 12 +#define FIRMWARE_ID_MAJOR_OFFSET 8 +#define FIRMWARE_ID_MINOR_OFFSET 4 +#define FIRMWARE_ID_PATCH_OFFSET 0 +#define FIRMWARE_ID_MASK GENMASK(3, 0) + +/* + * read CPLD register on custom protocol + * send clock and addr bit in strobe and datain pins then read from dataout pin + */ +static int upboard_fpga_read(void *context, unsigned int reg, unsigned int *val) +{ + struct upboard_fpga * const fpga = context; + int i; + + /* clear to start new transcation */ + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + reg |= UPFPGA_READ_FLAG; + + /* send clock and data from strobe & datain */ + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + *val = 0; + + /* read from dataout */ + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + *val |= gpiod_get_value(fpga->dataout_gpio) << i; + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +/* + * write CPLD register on custom protocol + * send clock and addr bit in strobe and datain pins then write to datain pin + */ +static int upboard_fpga_write(void *context, unsigned int reg, unsigned int val) +{ + struct upboard_fpga * const fpga = context; + int i; + + /* clear to start new transcation */ + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + /* send clock and data from strobe & datain */ + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + + /* write to datain pin */ + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->datain_gpio, !!(val & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +static const struct regmap_range upboard_up_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_range upboard_up_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_access_table upboard_up_readable_table = { + .yes_ranges = upboard_up_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_readable_ranges), +}; + +static const struct regmap_access_table upboard_up_writable_table = { + .yes_ranges = upboard_up_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_writable_ranges), +}; + +static const struct regmap_config upboard_up_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, + .cache_type = REGCACHE_NONE, + .rd_table = &upboard_up_readable_table, + .wr_table = &upboard_up_writable_table, +}; + +/* 3 LEDs controlled by CPLD */ +static struct upboard_led_data upboard_up_led_data[] = { + { .bit = 0, .colour = "yellow" }, + { .bit = 1, .colour = "green" }, + { .bit = 2, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up_mfd_cells[] = { + MFD_CELL_NAME("upboard-pinctrl"), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[0], + sizeof(*upboard_up_led_data), 1), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[1], + sizeof(*upboard_up_led_data), 2), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[2], + sizeof(*upboard_up_led_data), 3), +}; + +/* UP Squared 6000 EHL board */ + +static const struct upboard_fpga_data upboard_up_fpga_data = { + .regmap_config = &upboard_up_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +static const struct mfd_cell upboard_pinctrl_cells[] = { + MFD_CELL_NAME("upboard-pinctrl"), +}; + +static const struct upboard_fpga_data upboard_pinctrl_data = { + .regmap_config = &upboard_up_regmap_config, + .cells = upboard_pinctrl_cells, + .ncells = ARRAY_SIZE(upboard_pinctrl_cells), +}; + +/* UP^2 board */ +static const struct regmap_range upboard_up2_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_range upboard_up2_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_access_table upboard_up2_readable_table = { + .yes_ranges = upboard_up2_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_readable_ranges), +}; + +static const struct regmap_access_table upboard_up2_writable_table = { + .yes_ranges = upboard_up2_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_writable_ranges), +}; + +static const struct regmap_config upboard_up2_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, + .cache_type = REGCACHE_NONE, + .rd_table = &upboard_up2_readable_table, + .wr_table = &upboard_up2_writable_table, +}; + +static struct upboard_led_data upboard_up2_led_data[] = { + { .bit = 0, .colour = "blue" }, + { .bit = 1, .colour = "yellow" }, + { .bit = 2, .colour = "green" }, + { .bit = 3, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up2_mfd_cells[] = { + MFD_CELL_NAME("upboard-pinctrl"), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[0], + sizeof(*upboard_up2_led_data), 1), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[1], + sizeof(*upboard_up2_led_data), 2), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[2], + sizeof(*upboard_up2_led_data), 3), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[3], + sizeof(*upboard_up2_led_data), 4), +}; + +static const struct upboard_fpga_data upboard_up2_fpga_data = { + .regmap_config = &upboard_up2_regmap_config, + .cells = upboard_up2_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up2_mfd_cells), +}; + +/* UP-CRST02 carrier board for UP Core */ + +/* same MAX10 config as UP2, but same LED cells as UP1 */ +static const struct upboard_fpga_data upboard_upcore_crst02_fpga_data = { + .regmap_config = &upboard_up2_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +static int __init upboard_fpga_gpio_init(struct upboard_fpga *fpga) +{ + enum gpiod_flags flags = fpga->uninitialised ? GPIOD_OUT_LOW : GPIOD_ASIS; + + fpga->enable_gpio = devm_gpiod_get(fpga->dev, "enable", flags); + if (IS_ERR(fpga->enable_gpio)) + return PTR_ERR(fpga->enable_gpio); + + fpga->clear_gpio = devm_gpiod_get(fpga->dev, "clear", GPIOD_OUT_LOW); + if (IS_ERR(fpga->clear_gpio)) + return PTR_ERR(fpga->clear_gpio); + + fpga->strobe_gpio = devm_gpiod_get(fpga->dev, "strobe", GPIOD_OUT_LOW); + if (IS_ERR(fpga->strobe_gpio)) + return PTR_ERR(fpga->strobe_gpio); + + fpga->datain_gpio = devm_gpiod_get(fpga->dev, "datain", GPIOD_OUT_LOW); + if (IS_ERR(fpga->datain_gpio)) + return PTR_ERR(fpga->datain_gpio); + + fpga->dataout_gpio = devm_gpiod_get(fpga->dev, "dataout", GPIOD_IN); + if (IS_ERR(fpga->dataout_gpio)) + return PTR_ERR(fpga->dataout_gpio); + + /* + * The SoC pinctrl driver may not support reserving the GPIO line for + * FPGA reset without causing an undesired reset pulse. This will clear + * any settings on the FPGA, so only do it if we must. + * Reset GPIO defaults HIGH, get GPIO and set to LOW, then set back to + * HIGH as a pulse. + */ + if (fpga->uninitialised) { + fpga->reset_gpio = devm_gpiod_get(fpga->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(fpga->reset_gpio)) + return PTR_ERR(fpga->reset_gpio); + + gpiod_set_value(fpga->reset_gpio, RESET_DEVICE); + } + + gpiod_set_value(fpga->enable_gpio, ENABLE_DEVICE); + fpga->uninitialised = false; + + return 0; +} + +static int __init upboard_fpga_verify_device(struct upboard_fpga *fpga) +{ + unsigned int platform_id, manufacturer_id; + unsigned int firmware_id, build, major, minor, patch; + int ret; + + ret = regmap_read(fpga->regmap, UPFPGA_REG_PLATFORM_ID, &platform_id); + if (ret) + return ret; + + manufacturer_id = platform_id & MENUFACTURER_ID_MASK; + if (manufacturer_id != AAEON_MANUFACTURER_ID) { + dev_err(fpga->dev, + "Manufacturer ID 0x%02x not supported\n", + manufacturer_id); + + return -ENODEV; + } + + ret = regmap_read(fpga->regmap, UPFPGA_REG_FIRMWARE_ID, &firmware_id); + if (ret) + return ret; + + build = (firmware_id >> FIRMWARE_ID_BUILD_OFFSET) & FIRMWARE_ID_MASK; + major = (firmware_id >> FIRMWARE_ID_MAJOR_OFFSET) & FIRMWARE_ID_MASK; + minor = (firmware_id >> FIRMWARE_ID_MINOR_OFFSET) & FIRMWARE_ID_MASK; + patch = (firmware_id >> FIRMWARE_ID_PATCH_OFFSET) & FIRMWARE_ID_MASK; + + if (major != SUPPORTED_FW_MAJOR) { + dev_err(fpga->dev, "Manufacturer ID 0x%02x not supported\n", build); + + return -ENODEV; + } + + dev_info(fpga->dev, "Compatible FPGA FW v%u.%u.%u build 0x%02x", + major, minor, patch, build); + + return 0; +} + +static const struct mfd_cell upboard_gpio_led_cells[] = { + MFD_CELL_BASIC("leds-gpio", NULL, + &pdata, + sizeof(pdata), 0) +}; + +static int upboard_led_gpio_register(struct upboard_fpga *fpga) +{ + struct gpio_led blue_led, yellow_led, green_led, red_led; + struct gpio_desc *desc; + static struct gpio_led leds[4]; + int num_leds = 0; + int ret; + + desc = devm_gpiod_get(fpga->dev, "blue", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + blue_led.name = "upboard:blue:"; + blue_led.gpio = desc_to_gpio(desc); + blue_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = blue_led; + devm_gpiod_put(fpga->dev, desc); + } + + desc = devm_gpiod_get(fpga->dev, "yellow", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + yellow_led.name = "upboard:yellow:"; + yellow_led.gpio = desc_to_gpio(desc); + yellow_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = yellow_led; + devm_gpiod_put(fpga->dev, desc); + } + + desc = devm_gpiod_get(fpga->dev, "green", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + green_led.name = "upboard:green:"; + green_led.gpio = desc_to_gpio(desc); + green_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = green_led; + devm_gpiod_put(fpga->dev, desc); + } + + desc = devm_gpiod_get(fpga->dev, "red", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + red_led.name = "upboard:red:"; + red_led.gpio = desc_to_gpio(desc); + red_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = red_led; + devm_gpiod_put(fpga->dev, desc); + } + + /* No optional LEDs defined */ + if (num_leds == 0) + return 0; + + pdata.num_leds = num_leds; + pdata.leds = leds; + + ret = devm_mfd_add_devices(fpga->dev, PLATFORM_DEVID_AUTO, + upboard_gpio_led_cells, + ARRAY_SIZE(upboard_gpio_led_cells), + NULL, 0, NULL); + if (ret) { + dev_err(fpga->dev, "Failed to add GPIO LEDs, %d", ret); + return ret; + } + + return 0; +} + +/* + * -------------------------------------- ------------ + * | Intel SOC,1.8V | --- |ADC Chip | native driver + * | GPIO/I2C/SPI/UART/PWM | |SPI/I2C | + * -------------------------------------- ------------- + * | | + * ---------------------------------------------------------- + * | CPLD/FPGA Driver | upboard-fpga CPLD control driver + * | provide more GPIO driving power | register leds-upboard + * | HAT 40 pin mux function | register pinctrl-upboard + * --------------------------------------------------------- + * | | + * ---------- ------------------------------------------- + * |3 or 4| | HAT 40 pins, 3.3V | leds-upboard + * | Leds | |GPIO/ADC/I2C/SPI/UART/PWM | pinctrl-upboard + * ---------- ------------------------------------------- + */ +static const struct acpi_device_id upboard_fpga_acpi_match[] = { + { "AANT0000", (kernel_ulong_t)&upboard_pinctrl_data }, + { "AANT0F00", (kernel_ulong_t)&upboard_up_fpga_data }, + { "AANT0F01", (kernel_ulong_t)&upboard_up2_fpga_data }, + { "AANT0F02", (kernel_ulong_t)&upboard_up_fpga_data }, + { "AANT0F03", (kernel_ulong_t)&upboard_upcore_crst02_fpga_data }, + { "AANT0F04", (kernel_ulong_t)&upboard_up_fpga_data }, + { } +}; +MODULE_DEVICE_TABLE(acpi, upboard_fpga_acpi_match); + +static int __init upboard_fpga_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct upboard_fpga *ddata; + const struct acpi_device_id *id; + const struct upboard_fpga_data *fpga_data; + int ret; + + id = acpi_match_device(upboard_fpga_acpi_match, dev); + if (!id) + return -ENODEV; + + fpga_data = (const struct upboard_fpga_data *) id->driver_data; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + platform_set_drvdata(pdev, ddata); + ddata->dev = dev; + + ddata->regmap = devm_regmap_init(dev, NULL, ddata, fpga_data->regmap_config); + if (IS_ERR(ddata->regmap)) + return PTR_ERR(ddata->regmap); + + ddata->regmap_config = fpga_data->regmap_config; + + ret = upboard_fpga_gpio_init(ddata); + if (ret) { + /* Not FPGA firmware, abort FPGA GPIO initialize process */ + dev_warn(dev, "Failed to initialize FPGA common GPIOs: %d", ret); + } else { + upboard_fpga_verify_device(ddata); + } + + ret = upboard_led_gpio_register(ddata); + if (ret) { + /* LEDs are optional. */ + dev_warn(dev, "Failed to register LEDs: %d", ret); + } + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, + fpga_data->cells, + fpga_data->ncells, + NULL, 0, NULL); +} + +static struct platform_driver upboard_fpga_driver = { + .driver = { + .name = "upboard-fpga", + .acpi_match_table = upboard_fpga_acpi_match, + }, +}; +module_platform_driver_probe(upboard_fpga_driver, upboard_fpga_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_DESCRIPTION("UP Board CPLD/FPGA driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/upboard-fpga.h b/include/linux/mfd/upboard-fpga.h new file mode 100644 index 000000000000..d6bf7dd11da8 --- /dev/null +++ b/include/linux/mfd/upboard-fpga.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UP Board CPLD/FPGA driver + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + * + */ + +#ifndef __MFD_UPBOARD_FPGA_H +#define __MFD_UPBOARD_FPGA_H + +/* CPLD/FPGA protocol version */ +#define UPFPGA_PROTOCOL_V1_HRV 1 +#define UPFPGA_PROTOCOL_V2_HRV 2 + +#define UPFPGA_ADDRESS_SIZE 7 +#define UPFPGA_REGISTER_SIZE 16 + +#define UPFPGA_READ_FLAG BIT(UPFPGA_ADDRESS_SIZE) + +enum upboard_fpgareg { + UPFPGA_REG_PLATFORM_ID = 0x10, + UPFPGA_REG_FIRMWARE_ID = 0x11, + UPFPGA_REG_FUNC_EN0 = 0x20, + UPFPGA_REG_FUNC_EN1 = 0x21, + UPFPGA_REG_GPIO_EN0 = 0x30, + UPFPGA_REG_GPIO_EN1 = 0x31, + UPFPGA_REG_GPIO_EN2 = 0x32, + UPFPGA_REG_GPIO_DIR0 = 0x40, + UPFPGA_REG_GPIO_DIR1 = 0x41, + UPFPGA_REG_GPIO_DIR2 = 0x42, + UPFPGA_REG_MAX, +}; + +struct upboard_fpga { + struct device *dev; + struct regmap *regmap; + const struct regmap_config *regmap_config; + struct gpio_desc *enable_gpio; + struct gpio_desc *reset_gpio; + struct gpio_desc *clear_gpio; + struct gpio_desc *strobe_gpio; + struct gpio_desc *datain_gpio; + struct gpio_desc *dataout_gpio; + bool uninitialised; +}; + +struct upboard_led_data { + unsigned int bit; + const char *colour; +}; + +#endif /* __MFD_UPBOARD_FPGA_H */