diff mbox series

[1/6] dt-bindings: regulator: qcom,spmi: Document PM8909

Message ID 20230912-spmi-pm8909-v1-1-ba4b3bfaf87d@gerhold.net
State New
Headers
Series regulator: qcom_spmi: Add PM8909, PM8019 and PMA8084 |

Commit Message

Stephan Gerhold Sept. 12, 2023, 7:49 a.m. UTC 
  From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

Document the qcom,pm8909-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pm8909-regulators compatible).

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
---
 .../bindings/regulator/qcom,spmi-regulator.yaml       | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
index bdf34c2de96b..765c31246cc7 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
@@ -19,6 +19,7 @@  properties:
       - qcom,pm8005-regulators
       - qcom,pm8226-regulators
       - qcom,pm8841-regulators
+      - qcom,pm8909-regulators
       - qcom,pm8916-regulators
       - qcom,pm8941-regulators
       - qcom,pm8950-regulators
@@ -206,6 +207,24 @@  allOf:
       patternProperties:
         "^vdd_s[1-8]-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8909-regulators
+    then:
+      properties:
+        vdd_s1-supply: true
+        vdd_s2-supply: true
+        vdd_l1-supply: true
+        vdd_l2_l5-supply: true
+        vdd_l3_l6_l10-supply: true
+        vdd_l4_l7-supply: true
+        vdd_l8_l11_l15_l18-supply: true
+        vdd_l9_l12_l14_l17-supply: true
+        vdd_l13-supply: true
+
   - if:
       properties:
         compatible: