[v2,1/4] clk: mmp2: Move number of clocks to driver source
Commit Message
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
drivers/clk/mmp/clk-audio.c | 6 ++++--
drivers/clk/mmp/clk-of-mmp2.c | 4 +++-
include/dt-bindings/clock/marvell,mmp2-audio.h | 1 -
include/dt-bindings/clock/marvell,mmp2.h | 1 -
4 files changed, 7 insertions(+), 5 deletions(-)
Comments
Quoting Duje Mihanović (2023-08-12 03:02:56)
> The number of clocks should not be in the dt binding as it is not used
> by the respective device tree and thus needlessly bloats the ABI.
>
> Move this number of clocks into the driver source.
>
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> ---
Applied to clk-next
@@ -55,6 +55,8 @@
#define SSPA_AUD_PLL_CTRL1_DIV_OCLK_PATTERN_MASK (0x7ff << 0)
#define SSPA_AUD_PLL_CTRL1_DIV_OCLK_PATTERN(x) ((x) << 0)
+#define CLK_AUDIO_NR_CLKS 3
+
struct mmp2_audio_clk {
void __iomem *mmio_base;
@@ -336,7 +338,7 @@ static int register_clocks(struct mmp2_audio_clk *priv, struct device *dev)
priv->clk_data.hws[MMP2_CLK_AUDIO_SYSCLK] = &priv->sysclk_gate.hw;
priv->clk_data.hws[MMP2_CLK_AUDIO_SSPA0] = &priv->sspa0_gate.hw;
priv->clk_data.hws[MMP2_CLK_AUDIO_SSPA1] = &priv->sspa1_gate.hw;
- priv->clk_data.num = MMP2_CLK_AUDIO_NR_CLKS;
+ priv->clk_data.num = CLK_AUDIO_NR_CLKS;
return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
&priv->clk_data);
@@ -349,7 +351,7 @@ static int mmp2_audio_clk_probe(struct platform_device *pdev)
priv = devm_kzalloc(&pdev->dev,
struct_size(priv, clk_data.hws,
- MMP2_CLK_AUDIO_NR_CLKS),
+ CLK_AUDIO_NR_CLKS),
GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -78,6 +78,8 @@
#define MPMU_PLL_DIFF_CTRL 0x68
#define MPMU_PLL2_CTRL1 0x414
+#define NR_CLKS 200
+
enum mmp2_clk_model {
CLK_MODEL_MMP2,
CLK_MODEL_MMP3,
@@ -543,7 +545,7 @@ static void __init mmp2_clk_init(struct device_node *np)
mmp2_pm_domain_init(np, pxa_unit);
- mmp_clk_init(np, &pxa_unit->unit, MMP2_NR_CLKS);
+ mmp_clk_init(np, &pxa_unit->unit, NR_CLKS);
mmp2_main_clk_init(pxa_unit);
@@ -6,5 +6,4 @@
#define MMP2_CLK_AUDIO_SSPA0 1
#define MMP2_CLK_AUDIO_SSPA1 2
-#define MMP2_CLK_AUDIO_NR_CLKS 3
#endif
@@ -91,5 +91,4 @@
#define MMP3_CLK_SDH4 126
#define MMP2_CLK_AUDIO 127
-#define MMP2_NR_CLKS 200
#endif