diff mbox series

[net-next] octeontx2-af: Harden rule validation.

Message ID 20230809064039.1167803-1-rkannoth@marvell.com
State New
Headers
Series [net-next] octeontx2-af: Harden rule validation. |

Commit Message

Ratheesh Kannoth Aug. 9, 2023, 6:40 a.m. UTC 
  Accept TC offload classifier rule only if SPI field
can be extracted by HW.

Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Simon Horman Aug. 10, 2023, 2:34 p.m. UTC | #1 
On Wed, Aug 09, 2023 at 12:10:39PM +0530, Ratheesh Kannoth wrote:
> Accept TC offload classifier rule only if SPI field
> can be extracted by HW.
> 
> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>

Reviewed-by: Simon Horman <horms@kernel.org>
patchwork-bot+netdevbpf@kernel.org Aug. 11, 2023, 8:30 a.m. UTC | #2 
Hello:

This patch was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Wed, 9 Aug 2023 12:10:39 +0530 you wrote:
> Accept TC offload classifier rule only if SPI field
> can be extracted by HW.
> 
> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
> ---
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

Here is the summary with links:
  - [net-next] octeontx2-af: Harden rule validation.
    https://git.kernel.org/netdev/net-next/c/12aa0a3b93f3

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
index 5c8f9fc15ff8..237f82082ebe 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
@@ -580,7 +580,9 @@  static void npc_set_features(struct rvu *rvu, int blkaddr, u8 intf)
 		if (!npc_check_field(rvu, blkaddr, NPC_LB, intf))
 			*features &= ~BIT_ULL(NPC_OUTER_VID);
 
-	if (*features & (BIT_ULL(NPC_IPPROTO_AH) | BIT_ULL(NPC_IPPROTO_ESP)))
+	/* Set SPI flag only if AH/ESP and IPSEC_SPI are in the key */
+	if (npc_check_field(rvu, blkaddr, NPC_IPSEC_SPI, intf) &&
+	    (*features & (BIT_ULL(NPC_IPPROTO_ESP) | BIT_ULL(NPC_IPPROTO_AH))))
 		*features |= BIT_ULL(NPC_IPSEC_SPI);
 
 	/* for vlan ethertypes corresponding layer type should be in the key */