diff mbox series

[v2,2/8] arm64: dts: qcom: sa8775p: add a node for EMAC1

Message ID 20230808190144.19999-3-brgl@bgdev.pl
State New
Headers
Series arm64: dts: qcom: enable EMAC1 on sa8775p |

Commit Message

Bartosz Golaszewski Aug. 8, 2023, 7:01 p.m. UTC 
  From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add a node for the second MAC on sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 34 +++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Comments

Konrad Dybcio Aug. 8, 2023, 9:11 p.m. UTC | #1 
On 8.08.2023 21:01, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Add a node for the second MAC on sa8775p platforms.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 34 +++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 38d10af37ab0..82af2e6cbda4 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -2325,6 +2325,40 @@ cpufreq_hw: cpufreq@18591000 {
>  			#freq-domain-cells = <1>;
>  		};
>  
> +		ethernet1: ethernet@23000000 {
> +			compatible = "qcom,sa8775p-ethqos";
> +			reg = <0x0 0x23000000 0x0 0x10000>,
> +			      <0x0 0x23016000 0x0 0x100>;
> +			reg-names = "stmmaceth", "rgmii";
> +
> +			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "macirq";
> +
> +			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
> +				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
> +				 <&gcc GCC_EMAC1_PTP_CLK>,
> +				 <&gcc GCC_EMAC1_PHY_AUX_CLK>;
> +
> +			clock-names = "stmmaceth",
> +				      "pclk",
> +				      "ptp_ref",
> +				      "phyaux";
This is a very nitty nit, but if there's going to be a v3, please remove
the newline between clocks and clock-names

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 38d10af37ab0..82af2e6cbda4 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2325,6 +2325,40 @@  cpufreq_hw: cpufreq@18591000 {
 			#freq-domain-cells = <1>;
 		};
 
+		ethernet1: ethernet@23000000 {
+			compatible = "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23000000 0x0 0x10000>,
+			      <0x0 0x23016000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
+				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC1_PTP_CLK>,
+				 <&gcc GCC_EMAC1_PHY_AUX_CLK>;
+
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+
+			power-domains = <&gcc EMAC1_GDSC>;
+
+			phys = <&serdes1>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x140 0xf>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <16384>;
+
+			status = "disabled";
+		};
+
 		ethernet0: ethernet@23040000 {
 			compatible = "qcom,sa8775p-ethqos";
 			reg = <0x0 0x23040000 0x0 0x10000>,