diff mbox series

[v2,2/2] PCI: xilinx-nwl: Increase ECAM size to accommodate 256 buses.

Message ID 20230808103733.93707-4-thippeswamy.havalige@amd.com
State New
Headers
Series [v2,1/2] dt-bindings: PCI: xilinx-nwl: Modify ECAM size in example. |

Commit Message

Havalige, Thippeswamy Aug. 8, 2023, 10:37 a.m. UTC 
  Our controller is expecting ECAM size to be programmed by software. By
programming "NWL_ECAM_VALUE_DEFAULT  12" controller can access up to 16MB
ECAM region which is used to detect 16 buses, so by updating
"NWL_ECAM_VALUE_DEFAULT" to 16 so that controller can access up to 256MB
ECAM region to detect 256 buses.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
---
changes in v2:
- Update this changes in a seperate patch.
---
 drivers/pci/controller/pcie-xilinx-nwl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Bjorn Helgaas Aug. 8, 2023, 3:49 p.m. UTC | #1 
On Tue, Aug 08, 2023 at 04:07:33PM +0530, Thippeswamy Havalige wrote:
> Our controller is expecting ECAM size to be programmed by software. By
> programming "NWL_ECAM_VALUE_DEFAULT  12" controller can access up to 16MB
> ECAM region which is used to detect 16 buses, so by updating
> "NWL_ECAM_VALUE_DEFAULT" to 16 so that controller can access up to 256MB
> ECAM region to detect 256 buses.
> 
> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>

1) I'm still concerned that this adds a revlock with the corresponding
DT change.  Is that acceptable?  Should it be mentioned in the commit
log?

2) Lorenzo or Krzysztof, if/when you apply this, please drop the
period at the end of the subject line.  I've mentioned it several
times to no avail.

> ---
> changes in v2:
> - Update this changes in a seperate patch.
> ---
>  drivers/pci/controller/pcie-xilinx-nwl.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
> index a73554e..b515019 100644
> --- a/drivers/pci/controller/pcie-xilinx-nwl.c
> +++ b/drivers/pci/controller/pcie-xilinx-nwl.c
> @@ -126,7 +126,7 @@
>  #define E_ECAM_CR_ENABLE		BIT(0)
>  #define E_ECAM_SIZE_LOC			GENMASK(20, 16)
>  #define E_ECAM_SIZE_SHIFT		16
> -#define NWL_ECAM_VALUE_DEFAULT		12
> +#define NWL_ECAM_VALUE_DEFAULT		16
>  
>  #define CFG_DMA_REG_BAR			GENMASK(2, 0)
>  #define CFG_PCIE_CACHE			GENMASK(7, 0)
> -- 
> 1.8.3.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index a73554e..b515019 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -126,7 +126,7 @@ 
 #define E_ECAM_CR_ENABLE		BIT(0)
 #define E_ECAM_SIZE_LOC			GENMASK(20, 16)
 #define E_ECAM_SIZE_SHIFT		16
-#define NWL_ECAM_VALUE_DEFAULT		12
+#define NWL_ECAM_VALUE_DEFAULT		16
 
 #define CFG_DMA_REG_BAR			GENMASK(2, 0)
 #define CFG_PCIE_CACHE			GENMASK(7, 0)