[v4,4/6] arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
Commit Message
From: Jai Luthra <j-luthra@ti.com>
Enable audio output over HDMI instead of the 3.5mm jack.
A FET switch (U65) on the EVM muxes serial audio lines coming from McASP
between the codec (tlv320aic3106) and the HDMI bridge (sii9022).
By default it uses the codec, but it can be toggled to use the HDMI
bridge by shorting a (J24) header on the board.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
[a-bhatia1: Cosmetic changes]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 3 ++
.../boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso | 40 +++++++++++++++++++
2 files changed, 43 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
# Boards with AM62Ax SoC
dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
@@ -68,6 +69,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
# Enable support for device-tree overlays
+DTC_FLAGS_k3-am625-sk += -@
+DTC_FLAGS_k3-am62-lp-sk += -@
DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
DTC_FLAGS_k3-j721e-common-proc-board += -@
DTC_FLAGS_k3-j721s2-common-proc-board += -@
new file mode 100644
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * Audio playback via HDMI for AM625-SK and AM62-LP SK.
+ *
+ * Links:
+ * AM625 SK: https://www.ti.com/tool/SK-AM62
+ * AM62-LP SK: https://www.ti.com/tool/SK-AM62-LP
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ hdmi_audio: sound-sii9022 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM62x-Sil9022-HDMI";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
+ simple-audio-card,frame-master = <&hdmi_dailink_master>;
+
+ hdmi_dailink_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ system-clock-direction-out;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sii9022>;
+ };
+ };
+};
+
+&mcasp1 {
+ auxclk-fs-ratio = <2177>;
+};
+
+&codec_audio {
+ status = "disabled";
+};