@@ -643,18 +643,14 @@ typedef struct _MPI2_CHIP_REVISION_ID {
/*Manufacturing Page 2 */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check Header.PageLength at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check Header.PageLength at
+ *runtime before using HwSettings[].
*/
-#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
-#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_MAN_2 {
MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
- U32
- HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */
+ U32 HwSettings[]; /*0x08 */
} MPI2_CONFIG_PAGE_MAN_2,
*PTR_MPI2_CONFIG_PAGE_MAN_2,
Mpi2ManufacturingPage2_t,
@@ -666,18 +662,14 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_2 {
/*Manufacturing Page 3 */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check Header.PageLength at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check Header.PageLength at
+ *runtime before using Info[].
*/
-#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
-#define MPI2_MAN_PAGE_3_INFO_WORDS (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_MAN_3 {
MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
- U32
- Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */
+ U32 Info[]; /*0x08 */
} MPI2_CONFIG_PAGE_MAN_3,
*PTR_MPI2_CONFIG_PAGE_MAN_3,
Mpi2ManufacturingPage3_t,
@@ -765,12 +757,9 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_4 {
/*Manufacturing Page 5 */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumPhys at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumPhys at runtime before using Phy[].
*/
-#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
-#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
-#endif
typedef struct _MPI2_MANUFACTURING5_ENTRY {
U64 WWID; /*0x00 */
@@ -787,8 +776,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_5 {
U16 Reserved2; /*0x06 */
U32 Reserved3; /*0x08 */
U32 Reserved4; /*0x0C */
- MPI2_MANUFACTURING5_ENTRY
- Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */
+ MPI2_MANUFACTURING5_ENTRY Phy[]; /*0x10 */
} MPI2_CONFIG_PAGE_MAN_5,
*PTR_MPI2_CONFIG_PAGE_MAN_5,
Mpi2ManufacturingPage5_t,
@@ -864,12 +852,9 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
#define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF)
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumPhys at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumPhys at runtime before using ConnectorInfo[].
*/
-#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
-#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
@@ -880,8 +865,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
U8 NumPhys; /*0x20 */
U8 Reserved3; /*0x21 */
U16 Reserved4; /*0x22 */
- MPI2_MANPAGE7_CONNECTOR_INFO
- ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */
+ MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[]; /*0x24 */
} MPI2_CONFIG_PAGE_MAN_7,
*PTR_MPI2_CONFIG_PAGE_MAN_7,
Mpi2ManufacturingPage7_t,
@@ -1019,12 +1003,9 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 {
/*IO Unit Page 5 */
/*
- *Upper layer code (drivers, utilities, etc.) should leave this define set to
- *one and check the value returned for NumDmaEngines at runtime.
+ *Upper layer code (drivers, utilities, etc.) should check the value returned
+ *for NumDmaEngines at runtime before using DmaEngineCapabilities[].
*/
-#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
-#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
@@ -1042,7 +1023,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
U32 Reserved2; /*0x24 */
U32 Reserved3; /*0x28 */
U32
- DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */
+ DmaEngineCapabilities[]; /*0x2C */
} MPI2_CONFIG_PAGE_IO_UNIT_5,
*PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t;
@@ -1259,12 +1240,9 @@ typedef struct _MPI2_IOUNIT9_SENSOR {
#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumSensors at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumSensors at runtime before using Sensor[].
*/
-#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
-#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
@@ -1273,8 +1251,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
U8 NumSensors; /*0x0C */
U8 Reserved4; /*0x0D */
U16 Reserved3; /*0x0E */
- MPI2_IOUNIT9_SENSOR
- Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */
+ MPI2_IOUNIT9_SENSOR Sensor[]; /*0x10 */
} MPI2_CONFIG_PAGE_IO_UNIT_9,
*PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t;
@@ -1294,12 +1271,9 @@ typedef struct _MPI2_IOUNIT10_FUNCTION {
*pMpi2IOUnit10Function_t;
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumFunctions at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumFunctions at runtime before using Function[].
*/
-#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
-#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
@@ -1308,8 +1282,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
U16 Reserved2; /*0x06 */
U32 Reserved3; /*0x08 */
U32 Reserved4; /*0x0C */
- MPI2_IOUNIT10_FUNCTION
- Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */
+ MPI2_IOUNIT10_FUNCTION Function[]; /*0x10 */
} MPI2_CONFIG_PAGE_IO_UNIT_10,
*PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t;
@@ -1764,12 +1737,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_3 {
/*BIOS Page 4 */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumPhys at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumPhys at runtime before using Phy[].
*/
-#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
-#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
-#endif
typedef struct _MPI2_BIOS4_ENTRY {
U64 ReassignmentWWID; /*0x00 */
@@ -1782,8 +1752,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_4 {
U8 NumPhys; /*0x04 */
U8 Reserved1; /*0x05 */
U16 Reserved2; /*0x06 */
- MPI2_BIOS4_ENTRY
- Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */
+ MPI2_BIOS4_ENTRY Phy[]; /*0x08 */
} MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4,
Mpi2BiosPage4_t, *pMpi2BiosPage4_t;
@@ -2045,12 +2014,9 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 {
/*RAID Physical Disk Page 1 */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumPhysDiskPaths at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumPhysDiskPaths at runtime before using PhysicalDiskPath[].
*/
-#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
-#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
-#endif
typedef struct _MPI2_RAIDPHYSDISK1_PATH {
U16 DevHandle; /*0x00 */
@@ -2075,8 +2041,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
U8 PhysDiskNum; /*0x05 */
U16 Reserved1; /*0x06 */
U32 Reserved2; /*0x08 */
- MPI2_RAIDPHYSDISK1_PATH
- PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */
+ MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[]; /*0x0C */
} MPI2_CONFIG_PAGE_RD_PDISK_1,
*PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
Mpi2RaidPhysDiskPage1_t,
@@ -2502,12 +2467,9 @@ typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumPhys at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumPhys at runtime before using SASPhyPowerManagementSettings[].
*/
-#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
-#define MPI2_SAS_IOUNIT5_PHY_MAX (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
@@ -2516,7 +2478,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
U16 Reserved2;/*0x0A */
U32 Reserved3;/*0x0C */
MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS
- SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */
+ SASPhyPowerManagementSettings[]; /*0x10 */
} MPI2_CONFIG_PAGE_SASIOUNIT_5,
*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t;
@@ -2554,12 +2516,9 @@ typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumGroups at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumGroups at runtime before using PortWidthModulationGroupStatus[].
*/
-#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
-#define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
@@ -2569,7 +2528,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
U8 Reserved3; /*0x11 */
U16 Reserved4; /*0x12 */
MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
- PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */
+ PortWidthModulationGroupStatus[]; /*0x14 */
} MPI2_CONFIG_PAGE_SASIOUNIT_6,
*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t;
@@ -2597,12 +2556,9 @@ typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumGroups at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumGroups at runtime before using PortWidthModulationGroupSettings[].
*/
-#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
-#define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
@@ -2615,7 +2571,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
U8 Reserved4; /*0x15 */
U16 Reserved5; /*0x16 */
MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
- PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */
+ PortWidthModulationGroupSettings[]; /*0x18 */
} MPI2_CONFIG_PAGE_SASIOUNIT_7,
*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t;
@@ -3086,12 +3042,9 @@ typedef struct _MPI2_SASPHY2_PHY_EVENT {
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumPhyEvents at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumPhyEvents at runtime before using PhyEvent[].
*/
-#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
-#define MPI2_SASPHY2_PHY_EVENT_MAX (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER
@@ -3105,7 +3058,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
U16
Reserved3; /*0x0E */
MPI2_SASPHY2_PHY_EVENT
- PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */
+ PhyEvent[]; /*0x10 */
} MPI2_CONFIG_PAGE_SAS_PHY_2,
*PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
Mpi2SasPhyPage2_t,
@@ -3200,12 +3153,9 @@ typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumPhyEvents at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumPhyEvents at runtime before using PhyEventConfig[].
*/
-#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
-#define MPI2_SASPHY3_PHY_EVENT_MAX (1)
-#endif
typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER
@@ -3219,7 +3169,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
U16
Reserved3; /*0x0E */
MPI2_SASPHY3_PHY_EVENT_CONFIG
- PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */
+ PhyEventConfig[]; /*0x10 */
} MPI2_CONFIG_PAGE_SAS_PHY_3,
*PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t;
@@ -3358,12 +3308,9 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
/*Log Page 0 */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumLogEntries at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumLogEntries at runtime before using LogEntry[].
*/
-#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
-#define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
-#endif
#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C)
@@ -3393,8 +3340,7 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0 {
U32 Reserved2; /*0x0C */
U16 NumLogEntries;/*0x10 */
U16 Reserved3; /*0x12 */
- MPI2_LOG_0_ENTRY
- LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */
+ MPI2_LOG_0_ENTRY LogEntry[]; /*0x14 */
} MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0,
Mpi2LogPage0_t, *pMpi2LogPage0_t;
@@ -3408,12 +3354,9 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0 {
/*RAID Page 0 */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumElements at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumElements at runtime before using ConfigElement[].
*/
-#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
-#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)
-#endif
typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT {
U16 ElementFlags; /*0x00 */
@@ -3446,8 +3389,7 @@ typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 {
U8 NumElements; /*0x2C */
U8 Reserved2; /*0x2D */
U16 Reserved3; /*0x2E */
- MPI2_RAIDCONFIG0_CONFIG_ELEMENT
- ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */
+ MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[];/*0x30 */
} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
*PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
Mpi2RaidConfigurationPage0_t,
@@ -3687,12 +3629,9 @@ typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA {
Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t;
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumPhys at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumPhys at runtime before using PhyData[].
*/
-#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX
-#define MPI26_PCIE_IOUNIT0_PHY_MAX (1)
-#endif
typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
@@ -3701,7 +3640,7 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 {
U8 InitStatus; /*0x0D */
U16 Reserved3; /*0x0E */
MPI26_PCIE_IO_UNIT0_PHY_DATA
- PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX]; /*0x10 */
+ PhyData[]; /*0x10 */
} MPI26_CONFIG_PAGE_PIOUNIT_0,
*PTR_MPI26_CONFIG_PAGE_PIOUNIT_0,
Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t;
@@ -3993,12 +3932,9 @@ typedef struct _MPI26_PCIELINK2_LINK_EVENT {
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumLinkEvents at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumLinkEvents at runtime before using LinkEvent[].
*/
-#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX
-#define MPI26_PCIELINK2_LINK_EVENT_MAX (1)
-#endif
typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
@@ -4009,7 +3945,7 @@ typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 {
U8 Reserved3; /*0x0D */
U16 Reserved4; /*0x0E */
MPI26_PCIELINK2_LINK_EVENT
- LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */
+ LinkEvent[]; /*0x10 */
} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2,
Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t;
@@ -4067,12 +4003,9 @@ typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG {
#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001)
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check the value returned for NumLinkEvents at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check the value returned
+ *for NumLinkEvents at runtime before using LinkEventConfig[].
*/
-#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX
-#define MPI26_PCIELINK3_LINK_EVENT_MAX (1)
-#endif
typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
@@ -4083,7 +4016,7 @@ typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 {
U8 Reserved3; /*0x0D */
U16 Reserved4; /*0x0E */
MPI26_PCIELINK3_LINK_EVENT_CONFIG
- LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */
+ LinkEventConfig[]; /*0x10 */
} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3,
Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t;
@@ -295,20 +295,9 @@ typedef struct _MPI2_EXT_IMAGE_HEADER {
/*FLASH Layout Extended Image Data */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check RegionsPerLayout at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check NumberOfLayouts and
+ *RegionsPerLayout at runtime before using Layout[] and Region[].
*/
-#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
-#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
-#endif
-
-/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check NumberOfLayouts at runtime.
- */
-#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
-#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
-#endif
typedef struct _MPI2_FLASH_REGION {
U8 RegionType; /*0x00 */
@@ -325,7 +314,7 @@ typedef struct _MPI2_FLASH_LAYOUT {
U32 Reserved1; /*0x04 */
U32 Reserved2; /*0x08 */
U32 Reserved3; /*0x0C */
- MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */
+ MPI2_FLASH_REGION Region[]; /*0x10 */
} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
@@ -339,7 +328,7 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA {
U16 MinimumSectorAlignment; /*0x08 */
U16 Reserved3; /*0x0A */
U32 Reserved4; /*0x0C */
- MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */
+ MPI2_FLASH_LAYOUT Layout[]; /*0x10 */
} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
@@ -373,12 +362,9 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA {
/*Supported Devices Extended Image Data */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check NumberOfDevices at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check NumberOfDevices at
+ *runtime before using SupportedDevice[].
*/
-#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
-#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
-#endif
typedef struct _MPI2_SUPPORTED_DEVICE {
U16 DeviceID; /*0x00 */
@@ -399,7 +385,7 @@ typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
U8 Reserved2; /*0x03 */
U32 Reserved3; /*0x04 */
MPI2_SUPPORTED_DEVICE
- SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
+ SupportedDevice[]; /*0x08 */
} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
@@ -464,7 +450,7 @@ typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
U8 EncryptionAlgorithm; /*0x02 */
U8 Reserved1; /*0x03 */
U32 Reserved2; /*0x04 */
- U32 EncryptedHash[1]; /*0x08 */ /* variable length */
+ U32 EncryptedHash[]; /*0x08 */
} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY,
Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
@@ -508,7 +494,7 @@ typedef struct _MPI25_ENCRYPTED_HASH_DATA {
U8 NumHash; /*0x01 */
U16 Reserved1; /*0x02 */
U32 Reserved2; /*0x04 */
- MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /*0x08 */
+ MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[]; /*0x08 */
} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA,
Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
@@ -808,12 +808,9 @@ typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK {
/*Integrated RAID Configuration Change List Event data */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check NumElements at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check NumElements at
+ *runtime before using ConfigElement[].
*/
-#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
-#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1)
-#endif
typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT {
U16 ElementFlags; /*0x00 */
@@ -848,7 +845,7 @@ typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST {
U8 ConfigNum; /*0x03 */
U32 Flags; /*0x04 */
MPI2_EVENT_IR_CONFIG_ELEMENT
- ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */
+ ConfigElement[];/*0x08 */
} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
*PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
Mpi2EventDataIrConfigChangeList_t,
@@ -969,12 +966,9 @@ typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
/*SAS Topology Change List Event data */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check NumEntries at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check NumEntries at
+ *runtime before using PHY[].
*/
-#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
-#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1)
-#endif
typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY {
U16 AttachedDevHandle; /*0x00 */
@@ -994,7 +988,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
U8 ExpStatus; /*0x0A */
U8 PhysicalPort; /*0x0B */
MPI2_EVENT_SAS_TOPO_PHY_ENTRY
- PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */
+ PHY[]; /*0x0C */
} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
*PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
Mpi2EventDataSasTopologyChangeList_t,
@@ -1229,12 +1223,9 @@ typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION {
/*PCIe Topology Change List Event data (MPI v2.6 and later) */
/*
- *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- *one and check NumEntries at runtime.
+ *Host code (drivers, BIOS, utilities, etc.) should check NumEntries at
+ *runtime before using PortEntry[].
*/
-#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT
-#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1)
-#endif
typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
U16 AttachedDevHandle; /*0x00 */
@@ -1286,7 +1277,7 @@ typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
U8 SwitchStatus; /*0x0A */
U8 PhysicalPort; /*0x0B */
MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
- PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */
+ PortEntry[]; /*0x0C */
} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
*PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
Mpi26EventDataPCIeTopologyChangeList_t,