[v4] arm64: dts: ti: k3-j721s2: correct pinmux offset for ospi
Commit Message
Due to non-addressable regions in J721S2 SOC wkup_pmx was split
into four regions from wkup_pmx0 to wkup_pmx3.
Correcting OSPI1 pin mux, which now falls under wkup_pmx1.
Along with that removing unused pin mux for OSPI-0.
Fixes: 6bc829ceea41 ("arm64: dts: ti: k3-j721s2: Fix wkup pinmux range")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
Logs with v4
https://gist.github.com/uditkumarti/84a18d9c9a62fe0d22ee7c650340b12e
line 980 and 983 Both flashes are detected
Logs with original tree
https://gist.github.com/uditkumarti/41d3d7ccf278d4e00e6da349478e58aa
(line 1192) pin mux error, line 1209 and 1212 flashes are not detected
dtbs_check run after applying https://lore.kernel.org/all/20230721082654.27036-1-tony@atomide.com/
Change log:
Changes in v4:
- Removed unused CS pin mux
- Rebased and tested with next-20230804
- v3 : https://lore.kernel.org/all/20230803145655.806001-1-u-kumar1@ti.com/
Changes in v3:
- Corrected wkup_pmx for ospi1
- Removed unused pin MCU_OSPI1_CSn1, shared with pmic
- v2: https://lore.kernel.org/all/20230802113500.162276-1-u-kumar1@ti.com/
Changes in v2:
- Changed name of pin mux to align with
https://lore.kernel.org/all/20230721082654.27036-1-tony@atomide.com/ patch
- v1: https://lore.kernel.org/all/20230801125626.3287306-1-u-kumar1@ti.com/
.../dts/ti/k3-j721s2-common-proc-board.dts | 19 ++++++++++---------
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 3 ---
2 files changed, 10 insertions(+), 12 deletions(-)
Comments
Hi Udit,
On 04/08/23 13:23, Udit Kumar wrote:
> Due to non-addressable regions in J721S2 SOC wkup_pmx was split
> into four regions from wkup_pmx0 to wkup_pmx3.
>
> Correcting OSPI1 pin mux, which now falls under wkup_pmx1.
> Along with that removing unused pin mux for OSPI-0.
>
> Fixes: 6bc829ceea41 ("arm64: dts: ti: k3-j721s2: Fix wkup pinmux range")
>
> Signed-off-by: Udit Kumar <u-kumar1@ti.com>
> ---
> Logs with v4
> https://gist.github.com/uditkumarti/84a18d9c9a62fe0d22ee7c650340b12e
> line 980 and 983 Both flashes are detected
>
> Logs with original tree
> https://gist.github.com/uditkumarti/41d3d7ccf278d4e00e6da349478e58aa
> (line 1192) pin mux error, line 1209 and 1212 flashes are not detected
>
> dtbs_check run after applying https://lore.kernel.org/all/20230721082654.27036-1-tony@atomide.com/
>
> Change log:
>
> Changes in v4:
> - Removed unused CS pin mux
> - Rebased and tested with next-20230804
> - v3 : https://lore.kernel.org/all/20230803145655.806001-1-u-kumar1@ti.com/
>
> Changes in v3:
> - Corrected wkup_pmx for ospi1
> - Removed unused pin MCU_OSPI1_CSn1, shared with pmic
> - v2: https://lore.kernel.org/all/20230802113500.162276-1-u-kumar1@ti.com/
>
> Changes in v2:
> - Changed name of pin mux to align with
> https://lore.kernel.org/all/20230721082654.27036-1-tony@atomide.com/ patch
> - v1: https://lore.kernel.org/all/20230801125626.3287306-1-u-kumar1@ti.com/
>
> .../dts/ti/k3-j721s2-common-proc-board.dts | 19 ++++++++++---------
> arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 3 ---
> 2 files changed, 10 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index 20b32563c0ed..e81ef8a7a8a2 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -282,18 +282,19 @@ J721S2_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */
> J721S2_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */
> >;
> };
> +};
>
> +&wkup_pmx1 {
> mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
> pinctrl-single,pins = <
> - J721S2_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
> - J721S2_WKUP_IOPAD(0x05c, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
> - J721S2_WKUP_IOPAD(0x060, PIN_OUTPUT, 0) /* (C21) MCU_OSPI1_CSn1 */
> - J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
> - J721S2_WKUP_IOPAD(0x050, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
> - J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
> - J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
> - J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
> - J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
> + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
> + J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
> + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
> + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
> + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
> + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
> + J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
> + J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
> >;
> };
> };
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
> index 594766482071..a4006f328027 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
> @@ -56,9 +56,6 @@ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
> pinctrl-single,pins = <
> J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
> J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
> - J721S2_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (G17) MCU_OSPI0_CSn1 */
> - J721S2_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (F14) MCU_OSPI0_CSn2 */
> - J721S2_WKUP_IOPAD(0x03c, PIN_OUTPUT, 0) /* (F17) MCU_OSPI0_CSn3 */
Thank you for the patch,
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Thanks and Regards,
Vaishnav
> J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
> J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
> J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */
Hi Udit Kumar,
On Fri, 04 Aug 2023 13:23:41 +0530, Udit Kumar wrote:
> Due to non-addressable regions in J721S2 SOC wkup_pmx was split
> into four regions from wkup_pmx0 to wkup_pmx3.
>
> Correcting OSPI1 pin mux, which now falls under wkup_pmx1.
> Along with that removing unused pin mux for OSPI-0.
>
> Fixes: 6bc829ceea41 ("arm64: dts: ti: k3-j721s2: Fix wkup pinmux range")
>
> [...]
Also please make sure that am68-sk is sane as well. In the future, I'd prefer
all the fixes to be put in a single series to avoid this kind of cherry-pick
fixing.
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-j721s2: correct pinmux offset for ospi
commit: 06c4e7aa4af0682910ea52d7c23d85f59ea7dcc6
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
@@ -282,18 +282,19 @@ J721S2_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */
J721S2_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */
>;
};
+};
+&wkup_pmx1 {
mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
pinctrl-single,pins = <
- J721S2_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
- J721S2_WKUP_IOPAD(0x05c, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
- J721S2_WKUP_IOPAD(0x060, PIN_OUTPUT, 0) /* (C21) MCU_OSPI1_CSn1 */
- J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
- J721S2_WKUP_IOPAD(0x050, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
- J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
- J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
- J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
- J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
+ J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
+ J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
+ J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
+ J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
+ J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
+ J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
+ J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
+ J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
>;
};
};
@@ -56,9 +56,6 @@ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
pinctrl-single,pins = <
J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
- J721S2_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (G17) MCU_OSPI0_CSn1 */
- J721S2_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (F14) MCU_OSPI0_CSn2 */
- J721S2_WKUP_IOPAD(0x03c, PIN_OUTPUT, 0) /* (F17) MCU_OSPI0_CSn3 */
J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */