[2/5] mmc: au1xmmc: force non-modular build and remove symbol_get usage
Commit Message
au1xmmc is split somewhat awkwardly into the main mmc subsystem driver,
and callbacks in platform_data that sit under arch/mips/ and are
always built in. The latter than call mmc_detect_change through
symbol_get. Remove the use of symbol_get by requiring the driver
to be built in. In the future the interrupt handlers for card
insert/eject detection should probably be moved into the main driver,
and which point it can be built modular again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/mips/alchemy/devboards/db1000.c | 8 +-------
arch/mips/alchemy/devboards/db1200.c | 19 ++-----------------
arch/mips/alchemy/devboards/db1300.c | 10 +---------
drivers/mmc/host/Kconfig | 4 ++--
4 files changed, 6 insertions(+), 35 deletions(-)
Comments
On Tue, Aug 1, 2023 at 7:36 PM Christoph Hellwig <hch@lst.de> wrote:
>
> au1xmmc is split somewhat awkwardly into the main mmc subsystem driver,
> and callbacks in platform_data that sit under arch/mips/ and are
> always built in. The latter than call mmc_detect_change through
> symbol_get. Remove the use of symbol_get by requiring the driver
> to be built in. In the future the interrupt handlers for card
> insert/eject detection should probably be moved into the main driver,
> and which point it can be built modular again.
The carddetection stuff is entirely system-specific, I don't want the driver
littered with board-custom stuff; I'm fine with it being built-in only.
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> arch/mips/alchemy/devboards/db1000.c | 8 +-------
> arch/mips/alchemy/devboards/db1200.c | 19 ++-----------------
> arch/mips/alchemy/devboards/db1300.c | 10 +---------
> drivers/mmc/host/Kconfig | 4 ++--
> 4 files changed, 6 insertions(+), 35 deletions(-)
Ok For me. If it matters:
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Thanks!
Manuel
On Tue, Aug 1, 2023, at 19:35, Christoph Hellwig wrote:
> au1xmmc is split somewhat awkwardly into the main mmc subsystem driver,
> and callbacks in platform_data that sit under arch/mips/ and are
> always built in. The latter than call mmc_detect_change through
> symbol_get. Remove the use of symbol_get by requiring the driver
> to be built in. In the future the interrupt handlers for card
> insert/eject detection should probably be moved into the main driver,
> and which point it can be built modular again.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Good idea.
> of Alcor Micro PCI-E card reader
>
> config MMC_AU1X
> - tristate "Alchemy AU1XX0 MMC Card Interface support"
> + bool "Alchemy AU1XX0 MMC Card Interface support"
> depends on MIPS_ALCHEMY
> help
This needs a
depends on MMC=y
otherwise you get a link failure with CONFIG_MMC=m and
CONFIG_MMC_AU1X=y.
With that fixed,
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
On Tue, 1 Aug 2023 at 19:36, Christoph Hellwig <hch@lst.de> wrote:
>
> au1xmmc is split somewhat awkwardly into the main mmc subsystem driver,
> and callbacks in platform_data that sit under arch/mips/ and are
> always built in. The latter than call mmc_detect_change through
> symbol_get. Remove the use of symbol_get by requiring the driver
> to be built in. In the future the interrupt handlers for card
> insert/eject detection should probably be moved into the main driver,
> and which point it can be built modular again.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
If not too late, feel free to add:
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Kind regards
Uffe
> ---
> arch/mips/alchemy/devboards/db1000.c | 8 +-------
> arch/mips/alchemy/devboards/db1200.c | 19 ++-----------------
> arch/mips/alchemy/devboards/db1300.c | 10 +---------
> drivers/mmc/host/Kconfig | 4 ++--
> 4 files changed, 6 insertions(+), 35 deletions(-)
>
> diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
> index 79d66faa84828d..012da042d0a4f7 100644
> --- a/arch/mips/alchemy/devboards/db1000.c
> +++ b/arch/mips/alchemy/devboards/db1000.c
> @@ -14,7 +14,6 @@
> #include <linux/interrupt.h>
> #include <linux/leds.h>
> #include <linux/mmc/host.h>
> -#include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/pm.h>
> #include <linux/spi/spi.h>
> @@ -167,12 +166,7 @@ static struct platform_device db1x00_audio_dev = {
>
> static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
> {
> - void (*mmc_cd)(struct mmc_host *, unsigned long);
> - /* link against CONFIG_MMC=m */
> - mmc_cd = symbol_get(mmc_detect_change);
> - mmc_cd(ptr, msecs_to_jiffies(500));
> - symbol_put(mmc_detect_change);
> -
> + mmc_detect_change(ptr, msecs_to_jiffies(500));
> return IRQ_HANDLED;
> }
>
> diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
> index 1864eb935ca57f..76080c71a2a7b6 100644
> --- a/arch/mips/alchemy/devboards/db1200.c
> +++ b/arch/mips/alchemy/devboards/db1200.c
> @@ -10,7 +10,6 @@
> #include <linux/gpio.h>
> #include <linux/i2c.h>
> #include <linux/init.h>
> -#include <linux/module.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/leds.h>
> @@ -340,14 +339,7 @@ static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
>
> static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
> {
> - void (*mmc_cd)(struct mmc_host *, unsigned long);
> -
> - /* link against CONFIG_MMC=m */
> - mmc_cd = symbol_get(mmc_detect_change);
> - if (mmc_cd) {
> - mmc_cd(ptr, msecs_to_jiffies(200));
> - symbol_put(mmc_detect_change);
> - }
> + mmc_detect_change(ptr, msecs_to_jiffies(200));
>
> msleep(100); /* debounce */
> if (irq == DB1200_SD0_INSERT_INT)
> @@ -431,14 +423,7 @@ static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
>
> static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
> {
> - void (*mmc_cd)(struct mmc_host *, unsigned long);
> -
> - /* link against CONFIG_MMC=m */
> - mmc_cd = symbol_get(mmc_detect_change);
> - if (mmc_cd) {
> - mmc_cd(ptr, msecs_to_jiffies(200));
> - symbol_put(mmc_detect_change);
> - }
> + mmc_detect_change(ptr, msecs_to_jiffies(200));
>
> msleep(100); /* debounce */
> if (irq == PB1200_SD1_INSERT_INT)
> diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
> index e70e529ddd914d..ff61901329c626 100644
> --- a/arch/mips/alchemy/devboards/db1300.c
> +++ b/arch/mips/alchemy/devboards/db1300.c
> @@ -17,7 +17,6 @@
> #include <linux/interrupt.h>
> #include <linux/ata_platform.h>
> #include <linux/mmc/host.h>
> -#include <linux/module.h>
> #include <linux/mtd/mtd.h>
> #include <linux/mtd/platnand.h>
> #include <linux/platform_device.h>
> @@ -459,14 +458,7 @@ static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
>
> static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
> {
> - void (*mmc_cd)(struct mmc_host *, unsigned long);
> -
> - /* link against CONFIG_MMC=m. We can only be called once MMC core has
> - * initialized the controller, so symbol_get() should always succeed.
> - */
> - mmc_cd = symbol_get(mmc_detect_change);
> - mmc_cd(ptr, msecs_to_jiffies(200));
> - symbol_put(mmc_detect_change);
> + mmc_detect_change(ptr, msecs_to_jiffies(200));
>
> msleep(100); /* debounce */
> if (irq == DB1300_SD1_INSERT_INT)
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 159a3e9490aed8..f7afd179dd10bf 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -526,11 +526,11 @@ config MMC_ALCOR
> of Alcor Micro PCI-E card reader
>
> config MMC_AU1X
> - tristate "Alchemy AU1XX0 MMC Card Interface support"
> + bool "Alchemy AU1XX0 MMC Card Interface support"
> depends on MIPS_ALCHEMY
> help
> This selects the AMD Alchemy(R) Multimedia card interface.
> - If you have a Alchemy platform with a MMC slot, say Y or M here.
> + If you have a Alchemy platform with a MMC slot, say Y here.
>
> If unsure, say N.
>
> --
> 2.39.2
>
@@ -14,7 +14,6 @@
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
-#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/spi/spi.h>
@@ -167,12 +166,7 @@ static struct platform_device db1x00_audio_dev = {
static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
- /* link against CONFIG_MMC=m */
- mmc_cd = symbol_get(mmc_detect_change);
- mmc_cd(ptr, msecs_to_jiffies(500));
- symbol_put(mmc_detect_change);
-
+ mmc_detect_change(ptr, msecs_to_jiffies(500));
return IRQ_HANDLED;
}
@@ -10,7 +10,6 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/leds.h>
@@ -340,14 +339,7 @@ static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
-
- /* link against CONFIG_MMC=m */
- mmc_cd = symbol_get(mmc_detect_change);
- if (mmc_cd) {
- mmc_cd(ptr, msecs_to_jiffies(200));
- symbol_put(mmc_detect_change);
- }
+ mmc_detect_change(ptr, msecs_to_jiffies(200));
msleep(100); /* debounce */
if (irq == DB1200_SD0_INSERT_INT)
@@ -431,14 +423,7 @@ static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
-
- /* link against CONFIG_MMC=m */
- mmc_cd = symbol_get(mmc_detect_change);
- if (mmc_cd) {
- mmc_cd(ptr, msecs_to_jiffies(200));
- symbol_put(mmc_detect_change);
- }
+ mmc_detect_change(ptr, msecs_to_jiffies(200));
msleep(100); /* debounce */
if (irq == PB1200_SD1_INSERT_INT)
@@ -17,7 +17,6 @@
#include <linux/interrupt.h>
#include <linux/ata_platform.h>
#include <linux/mmc/host.h>
-#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/platnand.h>
#include <linux/platform_device.h>
@@ -459,14 +458,7 @@ static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
-
- /* link against CONFIG_MMC=m. We can only be called once MMC core has
- * initialized the controller, so symbol_get() should always succeed.
- */
- mmc_cd = symbol_get(mmc_detect_change);
- mmc_cd(ptr, msecs_to_jiffies(200));
- symbol_put(mmc_detect_change);
+ mmc_detect_change(ptr, msecs_to_jiffies(200));
msleep(100); /* debounce */
if (irq == DB1300_SD1_INSERT_INT)
@@ -526,11 +526,11 @@ config MMC_ALCOR
of Alcor Micro PCI-E card reader
config MMC_AU1X
- tristate "Alchemy AU1XX0 MMC Card Interface support"
+ bool "Alchemy AU1XX0 MMC Card Interface support"
depends on MIPS_ALCHEMY
help
This selects the AMD Alchemy(R) Multimedia card interface.
- If you have a Alchemy platform with a MMC slot, say Y or M here.
+ If you have a Alchemy platform with a MMC slot, say Y here.
If unsure, say N.