[v8,2/5] arm64: dts: ti: k3-j784s4-main: Add WIZ and SERDES PHY nodes
Commit Message
From: Siddharth Vadapalli <s-vadapalli@ti.com>
J784S4 SoC has 4 Serdes instances along with their respective WIZ
instances. Add device-tree nodes for them and disable them by default.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[j-choudhary@ti.com: fix serdes_wiz clock order & disable serdes refclk]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 172 +++++++++++++++++++++
1 file changed, 172 insertions(+)
Comments
On 01/08/2023 10:00, Jayesh Choudhary wrote:
> From: Siddharth Vadapalli <s-vadapalli@ti.com>
>
> J784S4 SoC has 4 Serdes instances along with their respective WIZ
> instances. Add device-tree nodes for them and disable them by default.
>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> [j-choudhary@ti.com: fix serdes_wiz clock order & disable serdes refclk]
> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 172 +++++++++++++++++++++
> 1 file changed, 172 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> index 8a816563706b..fbf5ab94d785 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> @@ -6,9 +6,19 @@
> */
>
> #include <dt-bindings/mux/mux.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/phy/phy-ti.h>
>
> #include "k3-serdes.h"
>
> +/ {
> + serdes_refclk: serdes-refclk {
standard name should begin with clock
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + status = "disabled";
> + };
> +};
> +
> &cbass_main {
> msmc_ram: sram@70000000 {
> compatible = "mmio-sram";
> @@ -709,6 +719,168 @@ main_sdhci1: mmc@4fb0000 {
> status = "disabled";
> };
>
> + serdes_wiz0: wiz@5060000 {
> + compatible = "ti,j784s4-wiz-10g";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + power-domains = <&k3_pds 404 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 404 2>, <&k3_clks 404 6>, <&serdes_refclk>, <&k3_clks 404 5>;
> + clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
> + assigned-clocks = <&k3_clks 404 6>;
> + assigned-clock-parents = <&k3_clks 404 10>;
> + num-lanes = <4>;
> + #reset-cells = <1>;
> + #clock-cells = <1>;
> + ranges = <0x5060000 0x00 0x5060000 0x10000>;
> +> + status = "disabled";
> +
drop blank lines here and rest of this file where you set status to "disabled".
> + serdes0: serdes@5060000 {
phy@5060000
> + compatible = "ti,j721e-serdes-10g";
> + reg = <0x05060000 0x010000>;
> + reg-names = "torrent_phy";
> + resets = <&serdes_wiz0 0>;
> + reset-names = "torrent_reset";
> + clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
> + <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
> + clock-names = "refclk", "phy_en_refclk";
> + assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
> + <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
> + <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
> + assigned-clock-parents = <&k3_clks 404 6>,
> + <&k3_clks 404 6>,
> + <&k3_clks 404 6>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <1>;
> +
> + status = "disabled";
> + };
> + };
> +
> + serdes_wiz1: wiz@5070000 {
> + compatible = "ti,j784s4-wiz-10g";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + power-domains = <&k3_pds 405 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 405 2>, <&k3_clks 405 6>, <&serdes_refclk>, <&k3_clks 405 5>;
> + clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
> + assigned-clocks = <&k3_clks 405 6>;
> + assigned-clock-parents = <&k3_clks 405 10>;
> + num-lanes = <4>;
> + #reset-cells = <1>;
> + #clock-cells = <1>;
> + ranges = <0x05070000 0x00 0x05070000 0x10000>;
> +
> + status = "disabled";
> +
> + serdes1: serdes@5070000 {
phy@5070000
> + compatible = "ti,j721e-serdes-10g";
> + reg = <0x05070000 0x010000>;
> + reg-names = "torrent_phy";
> + resets = <&serdes_wiz1 0>;
> + reset-names = "torrent_reset";
> + clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
> + <&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>;
> + clock-names = "refclk", "phy_en_refclk";
> + assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
> + <&serdes_wiz1 TI_WIZ_PLL1_REFCLK>,
> + <&serdes_wiz1 TI_WIZ_REFCLK_DIG>;
> + assigned-clock-parents = <&k3_clks 405 6>,
> + <&k3_clks 405 6>,
> + <&k3_clks 405 6>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <1>;
> +
> + status = "disabled";
> + };
> + };
> +
> + serdes_wiz2: wiz@5020000 {
> + compatible = "ti,j784s4-wiz-10g";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + power-domains = <&k3_pds 406 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 406 2>, <&k3_clks 406 6>, <&serdes_refclk>, <&k3_clks 406 5>;
> + clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
> + assigned-clocks = <&k3_clks 406 6>;
> + assigned-clock-parents = <&k3_clks 406 10>;
> + num-lanes = <4>;
> + #reset-cells = <1>;
> + #clock-cells = <1>;
> + ranges = <0x05020000 0x00 0x05020000 0x10000>;
> +
> + status = "disabled";
> +
> + serdes2: serdes@5020000 {
phy@5020000
> + compatible = "ti,j721e-serdes-10g";
> + reg = <0x05020000 0x010000>;
> + reg-names = "torrent_phy";
> + resets = <&serdes_wiz2 0>;
> + reset-names = "torrent_reset";
> + clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
> + <&serdes_wiz2 TI_WIZ_PHY_EN_REFCLK>;
> + clock-names = "refclk", "phy_en_refclk";
> + assigned-clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
> + <&serdes_wiz2 TI_WIZ_PLL1_REFCLK>,
> + <&serdes_wiz2 TI_WIZ_REFCLK_DIG>;
> + assigned-clock-parents = <&k3_clks 406 6>,
> + <&k3_clks 406 6>,
> + <&k3_clks 406 6>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <1>;
> +
> + status = "disabled";
> + };
> + };
> +
> + serdes_wiz4: wiz@5050000 {
> + compatible = "ti,j784s4-wiz-10g";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + power-domains = <&k3_pds 407 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 407 2>, <&k3_clks 407 6>, <&serdes_refclk>, <&k3_clks 407 5>;
> + clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
> + assigned-clocks = <&k3_clks 407 6>;
> + assigned-clock-parents = <&k3_clks 407 10>;
> + num-lanes = <4>;
> + #reset-cells = <1>;
> + #clock-cells = <1>;
> + ranges = <0x05050000 0x00 0x05050000 0x10000>,
> + <0xa030a00 0x00 0xa030a00 0x40>; /* DPTX PHY */
> +
> + status = "disabled";
> +
> + serdes4: serdes@5050000 {
phy@5050000
> + /*
> + * Note: we also map DPTX PHY registers as the Torrent
> + * needs to manage those.
> + */
> + compatible = "ti,j721e-serdes-10g";
> + reg = <0x05050000 0x010000>,
> + <0x0a030a00 0x40>; /* DPTX PHY */
> + reg-names = "torrent_phy";
> + resets = <&serdes_wiz4 0>;
> + reset-names = "torrent_reset";
> + clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
> + <&serdes_wiz4 TI_WIZ_PHY_EN_REFCLK>;
> + clock-names = "refclk", "phy_en_refclk";
> + assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
> + <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
> + <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
> + assigned-clock-parents = <&k3_clks 407 6>,
> + <&k3_clks 407 6>,
> + <&k3_clks 407 6>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <1>;
> +
> + status = "disabled";
> + };
> + };
> +
> main_navss: bus@30000000 {
> compatible = "simple-bus";
> #address-cells = <2>;
Hello Roger,
On 01/08/23 22:26, Roger Quadros wrote:
>
>
> On 01/08/2023 10:00, Jayesh Choudhary wrote:
>> From: Siddharth Vadapalli <s-vadapalli@ti.com>
>>
>> J784S4 SoC has 4 Serdes instances along with their respective WIZ
>> instances. Add device-tree nodes for them and disable them by default.
>>
>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
>> [j-choudhary@ti.com: fix serdes_wiz clock order & disable serdes refclk]
>> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
>> ---
>> arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 172 +++++++++++++++++++++
>> 1 file changed, 172 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> index 8a816563706b..fbf5ab94d785 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> @@ -6,9 +6,19 @@
>> */
>>
>> #include <dt-bindings/mux/mux.h>
>> +#include <dt-bindings/phy/phy.h>
>> +#include <dt-bindings/phy/phy-ti.h>
>>
>> #include "k3-serdes.h"
>>
>> +/ {
>> + serdes_refclk: serdes-refclk {
>
> standard name should begin with clock
>
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + status = "disabled";
>> + };
>> +};
>> +
>> &cbass_main {
>> msmc_ram: sram@70000000 {
>> compatible = "mmio-sram";
>> @@ -709,6 +719,168 @@ main_sdhci1: mmc@4fb0000 {
>> status = "disabled";
>> };
>>
>> + serdes_wiz0: wiz@5060000 {
>> + compatible = "ti,j784s4-wiz-10g";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + power-domains = <&k3_pds 404 TI_SCI_PD_EXCLUSIVE>;
>> + clocks = <&k3_clks 404 2>, <&k3_clks 404 6>, <&serdes_refclk>, <&k3_clks 404 5>;
>> + clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
>> + assigned-clocks = <&k3_clks 404 6>;
>> + assigned-clock-parents = <&k3_clks 404 10>;
>> + num-lanes = <4>;
>> + #reset-cells = <1>;
>> + #clock-cells = <1>;
>> + ranges = <0x5060000 0x00 0x5060000 0x10000>;
>> +> + status = "disabled";
>> +
> drop blank lines here and rest of this file where you set status to "disabled".
>
>> + serdes0: serdes@5060000 {
>
> phy@5060000
According to the bindings, serdes is valid.
(./Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml)
It would throw dtbs_check errors with phy@.
If its a binding change that you are suggesting, then it can be picked
up later on for all platform at once.
So keeping it as serdes@50*0000 on all the suggested places.
>
>> + compatible = "ti,j721e-serdes-10g";
>> + reg = <0x05060000 0x010000>;
[...]
>> +
>> + serdes1: serdes@5070000 {
>
> phy@5070000
>> + compatible = "ti,j721e-serdes-10g";
>> + reg = <0x05070000 0x010000>;
>> + reg-names = "torrent_phy";
[...]
>> +
>> + status = "disabled";
>> +
>> + serdes2: serdes@5020000 {
>
> phy@5020000
>
>> + compatible = "ti,j721e-serdes-10g";
>> + reg = <0x05020000 0x010000>;
[...]
>> + status = "disabled";
>> +
>> + serdes4: serdes@5050000 {
>
> phy@5050000
>
>> + /*
[...]
@@ -6,9 +6,19 @@
*/
#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-ti.h>
#include "k3-serdes.h"
+/ {
+ serdes_refclk: serdes-refclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ status = "disabled";
+ };
+};
+
&cbass_main {
msmc_ram: sram@70000000 {
compatible = "mmio-sram";
@@ -709,6 +719,168 @@ main_sdhci1: mmc@4fb0000 {
status = "disabled";
};
+ serdes_wiz0: wiz@5060000 {
+ compatible = "ti,j784s4-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 404 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 404 2>, <&k3_clks 404 6>, <&serdes_refclk>, <&k3_clks 404 5>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+ assigned-clocks = <&k3_clks 404 6>;
+ assigned-clock-parents = <&k3_clks 404 10>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x5060000 0x00 0x5060000 0x10000>;
+
+ status = "disabled";
+
+ serdes0: serdes@5060000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05060000 0x010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz0 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 404 6>,
+ <&k3_clks 404 6>,
+ <&k3_clks 404 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
+ serdes_wiz1: wiz@5070000 {
+ compatible = "ti,j784s4-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 405 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 405 2>, <&k3_clks 405 6>, <&serdes_refclk>, <&k3_clks 405 5>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+ assigned-clocks = <&k3_clks 405 6>;
+ assigned-clock-parents = <&k3_clks 405 10>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x05070000 0x00 0x05070000 0x10000>;
+
+ status = "disabled";
+
+ serdes1: serdes@5070000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05070000 0x010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz1 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz1 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz1 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 405 6>,
+ <&k3_clks 405 6>,
+ <&k3_clks 405 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
+ serdes_wiz2: wiz@5020000 {
+ compatible = "ti,j784s4-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 406 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 406 2>, <&k3_clks 406 6>, <&serdes_refclk>, <&k3_clks 406 5>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+ assigned-clocks = <&k3_clks 406 6>;
+ assigned-clock-parents = <&k3_clks 406 10>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x05020000 0x00 0x05020000 0x10000>;
+
+ status = "disabled";
+
+ serdes2: serdes@5020000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05020000 0x010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz2 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz2 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz2 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz2 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 406 6>,
+ <&k3_clks 406 6>,
+ <&k3_clks 406 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
+ serdes_wiz4: wiz@5050000 {
+ compatible = "ti,j784s4-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 407 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 407 2>, <&k3_clks 407 6>, <&serdes_refclk>, <&k3_clks 407 5>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+ assigned-clocks = <&k3_clks 407 6>;
+ assigned-clock-parents = <&k3_clks 407 10>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x05050000 0x00 0x05050000 0x10000>,
+ <0xa030a00 0x00 0xa030a00 0x40>; /* DPTX PHY */
+
+ status = "disabled";
+
+ serdes4: serdes@5050000 {
+ /*
+ * Note: we also map DPTX PHY registers as the Torrent
+ * needs to manage those.
+ */
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05050000 0x010000>,
+ <0x0a030a00 0x40>; /* DPTX PHY */
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz4 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz4 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 407 6>,
+ <&k3_clks 407 6>,
+ <&k3_clks 407 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
main_navss: bus@30000000 {
compatible = "simple-bus";
#address-cells = <2>;