diff mbox series

[3/5] arm64: dts: ti: k3-am62a7-sk: Drop i2c-1 to 100Khz

Message ID 20230731-mcasp_am62a-v1-3-8bd137ffa8f1@ti.com
State New
Headers
Series arm64: ti: Enable audio on AM62A |

Commit Message

Jai Luthra July 31, 2023, 12:44 p.m. UTC 
  The TLV320AIC3106 audio codec is interfaced on the i2c-1 bus. With the
default rate of 400Khz the i2c register writes fail to sync:

[   36.026387] tlv320aic3x 1-001b: Unable to sync registers 0x16-0x16. -110
[   38.101130] omap_i2c 20010000.i2c: controller timed out

Dropping the rate to 100Khz fixes the issue.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Devarsh Thakkar Aug. 2, 2023, 7:39 a.m. UTC | #1 
On 31/07/23 18:14, Jai Luthra wrote:
> The TLV320AIC3106 audio codec is interfaced on the i2c-1 bus. With the
> default rate of 400Khz the i2c register writes fail to sync:
> 
> [   36.026387] tlv320aic3x 1-001b: Unable to sync registers 0x16-0x16. -110
> [   38.101130] omap_i2c 20010000.i2c: controller timed out
> 
> Dropping the rate to 100Khz fixes the issue.
> 
> Signed-off-by: Jai Luthra <j-luthra@ti.com>

Reviewed-by: Devarsh Thakkar <devarsht@ti.com>

> ---
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index 9d34b8fe4ecb..752c2f640f63 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -338,7 +338,7 @@ &main_i2c1 {
>  	status = "okay";
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&main_i2c1_pins_default>;
> -	clock-frequency = <400000>;
> +	clock-frequency = <100000>;
>  
>  	exp1: gpio@22 {
>  		compatible = "ti,tca6424";
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 9d34b8fe4ecb..752c2f640f63 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -338,7 +338,7 @@  &main_i2c1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	exp1: gpio@22 {
 		compatible = "ti,tca6424";