[net-next,v2,4/5] net: dsa: qca8k: move qca8xxx hol fixup to separate function
Commit Message
Move qca8xxx hol fixup to separate function to tidy things up and to
permit using a more efficent loop in future patch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/net/dsa/qca/qca8k-8xxx.c | 78 +++++++++++++++++---------------
1 file changed, 42 insertions(+), 36 deletions(-)
Comments
On Sat, Jul 29, 2023 at 01:55:08PM +0200, Christian Marangi wrote:
> Move qca8xxx hol fixup to separate function to tidy things up and to
> permit using a more efficent loop in future patch.
nit: efficent -> efficient
@@ -1756,6 +1756,46 @@ static int qca8k_connect_tag_protocol(struct dsa_switch *ds,
return 0;
}
+static void qca8k_setup_hol_fixup(struct qca8k_priv *priv, int port)
+{
+ u32 mask;
+
+ switch (port) {
+ /* The 2 CPU port and port 5 requires some different
+ * priority than any other ports.
+ */
+ case 0:
+ case 5:
+ case 6:
+ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
+ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
+ break;
+ default:
+ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
+ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
+ }
+ regmap_write(priv->regmap, QCA8K_REG_PORT_HOL_CTRL0(port), mask);
+
+ mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
+ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_WRED_EN;
+ regmap_update_bits(priv->regmap, QCA8K_REG_PORT_HOL_CTRL1(port),
+ QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
+ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_WRED_EN,
+ mask);
+}
+
static int
qca8k_setup(struct dsa_switch *ds)
{
@@ -1895,42 +1935,8 @@ qca8k_setup(struct dsa_switch *ds)
* missing settings to improve switch stability under load condition.
* This problem is limited to qca8337 and other qca8k switch are not affected.
*/
- if (priv->switch_id == QCA8K_ID_QCA8337) {
- switch (i) {
- /* The 2 CPU port and port 5 requires some different
- * priority than any other ports.
- */
- case 0:
- case 5:
- case 6:
- mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
- QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
- break;
- default:
- mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
- QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
- }
- qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
-
- mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
- QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
- QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
- QCA8K_PORT_HOL_CTRL1_WRED_EN;
- qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
- QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
- QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
- QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
- QCA8K_PORT_HOL_CTRL1_WRED_EN,
- mask);
- }
+ if (priv->switch_id == QCA8K_ID_QCA8337)
+ qca8k_setup_hol_fixup(priv, i);
}
/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */