diff mbox series

[RFC,v2,05/11] iio: adc: stm32-dfsdm: manage dfsdm as a channel provider

Message ID 20230727150324.1157933-6-olivier.moysan@foss.st.com
State New
Headers
Series iio: add iio backend device type |

Commit Message

Olivier MOYSAN July 27, 2023, 3:03 p.m. UTC 
  The STM32 is currently implemented as a channels consumer
of the sigma delta modulator.
Change the topology to expose a single IIO device for DFSDM
and remove the IIO device associated to the SD modulator.
Manage the DFSDM as a channel provider to allow this change.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
---
 drivers/iio/adc/stm32-dfsdm-adc.c | 19 -------------------
 1 file changed, 19 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index b5cc43d12b6f..20f7dffcecdd 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -77,7 +77,6 @@  struct stm32_dfsdm_adc {
 
 	/* ADC specific */
 	unsigned int oversamp;
-	struct iio_hw_consumer *hwc;
 	struct completion completion;
 	u32 *buffer;
 
@@ -1007,12 +1006,6 @@  static int stm32_dfsdm_postenable(struct iio_dev *indio_dev)
 	/* Reset adc buffer index */
 	adc->bufi = 0;
 
-	if (adc->hwc) {
-		ret = iio_hw_consumer_enable(adc->hwc);
-		if (ret < 0)
-			return ret;
-	}
-
 	ret = stm32_dfsdm_start_dfsdm(adc->dfsdm);
 	if (ret < 0)
 		goto err_stop_hwc;
@@ -1036,8 +1029,6 @@  static int stm32_dfsdm_postenable(struct iio_dev *indio_dev)
 stop_dfsdm:
 	stm32_dfsdm_stop_dfsdm(adc->dfsdm);
 err_stop_hwc:
-	if (adc->hwc)
-		iio_hw_consumer_disable(adc->hwc);
 
 	return ret;
 }
@@ -1052,9 +1043,6 @@  static int stm32_dfsdm_predisable(struct iio_dev *indio_dev)
 
 	stm32_dfsdm_stop_dfsdm(adc->dfsdm);
 
-	if (adc->hwc)
-		iio_hw_consumer_disable(adc->hwc);
-
 	return 0;
 }
 
@@ -1231,7 +1219,6 @@  static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
 		ret = iio_device_claim_direct_mode(indio_dev);
 		if (ret)
 			return ret;
-		ret = iio_hw_consumer_enable(adc->hwc);
 		if (ret < 0) {
 			dev_err(&indio_dev->dev,
 				"%s: IIO enable failed (channel %d)\n",
@@ -1240,7 +1227,6 @@  static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
 			return ret;
 		}
 		ret = stm32_dfsdm_single_conv(indio_dev, chan, val);
-		iio_hw_consumer_disable(adc->hwc);
 		if (ret < 0) {
 			dev_err(&indio_dev->dev,
 				"%s: Conversion failed (channel %d)\n",
@@ -1450,11 +1436,6 @@  static int stm32_dfsdm_adc_init(struct device *dev, struct iio_dev *indio_dev)
 		return num_ch < 0 ? num_ch : -EINVAL;
 	}
 
-	/* Bind to SD modulator IIO device */
-	adc->hwc = devm_iio_hw_consumer_alloc(&indio_dev->dev);
-	if (IS_ERR(adc->hwc))
-		return -EPROBE_DEFER;
-
 	ch = devm_kcalloc(&indio_dev->dev, num_ch, sizeof(*ch),
 			  GFP_KERNEL);
 	if (!ch)