[2/2] iio: adc: mcp3911: add support for the whole MCP39xx family

  Microchip does have many similar chips, add support for those.

The new supported chips are:
  - microchip,mcp3910
  - microchip,mcp3912
  - microchip,mcp3913
  - microchip,mcp3914
  - microchip,mcp3918
  - microchip,mcp3919

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
 drivers/iio/adc/mcp3911.c | 377 +++++++++++++++++++++++++++++++-------
 1 file changed, 314 insertions(+), 63 deletions(-)
  

Hi,

I will update the Kconfig help text to mention all supported chips in
v2.

Best regards,
Marcus Folkesson
  

On Thu, 27 Jul 2023 12:13:18 +0200
Marcus Folkesson <marcus.folkesson@gmail.com> wrote:

> Microchip does have many similar chips, add support for those.
> 
> The new supported chips are:
>   - microchip,mcp3910
>   - microchip,mcp3912
>   - microchip,mcp3913
>   - microchip,mcp3914
>   - microchip,mcp3918
>   - microchip,mcp3919
> 
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>

Hi Marcus.

Main thing in here is that using matches against an enum for the chip
varients in code is rarely as scalable as it initially seems to be.
It tends to end up as much more extensible and maintainable to either
add callbacks covering the differences or data to the chip_info structure.
That puts all the differences between parts in one place and allows
mixing and matching of features in a simple fashion.

Otherwise, looks good.

Jonathan

> ---
>  drivers/iio/adc/mcp3911.c | 377 +++++++++++++++++++++++++++++++-------
>  1 file changed, 314 insertions(+), 63 deletions(-)
> 
> diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
> index 974c5bd923a6..def3944e2508 100644
> --- a/drivers/iio/adc/mcp3911.c
> +++ b/drivers/iio/adc/mcp3911.c
> @@ -61,12 +61,44 @@
>  #define MCP3911_REG_WRITE(reg, id)	((((reg) << 1) | ((id) << 6) | (0 << 0)) & 0xff)
>  #define MCP3911_REG_MASK		GENMASK(4, 1)
>  
> -#define MCP3911_NUM_CHANNELS		2
>  #define MCP3911_NUM_SCALES		6
>  
> +
> +/* These registers are common for all chips in the family except MCP3911 */
> +#define MCP39XX_REG_STATUSCOM		0x0c

Wild cards in naming rarely a good idea. Here they are already wrong :)
Just pick a device that they are true for an name them after that.

> +#define MCP39XX_STATUSCOM_READ		GENMASK(23, 22)
> +#define MCP39XX_STATUSCOM_DRHIZ         BIT(20)
> +
> +#define MCP39XX_REG_GAIN		0x0b
> +
> +#define MCP39XX_REG_CONFIG0		0x0d
> +#define MCP39XX_CONFIG0_EN_OFFCAL	BIT(23)
> +#define MCP39XX_CONFIG0_OSR		GENMASK(15, 13)
> +
> +#define MCP39XX_REG_CONFIG1		0x0e
> +#define MCP39XX_CONFIG1_CLKEXT		BIT(6)
> +#define MCP39XX_CONFIG1_VREFEXT		BIT(7)
> +
> +#define MCP39XX_REG_OFFCAL_CH0		0x0f
> +#define MCP39XX_OFFCAL(x)		(MCP39XX_REG_OFFCAL_CH0 + x * 6)
> +
> +
> +/* Maximal number of channels used by the MCP39XX family */
> +#define MCP39XX_MAX_NUM_CHANNELS	8
> +
>  static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 };
>  static u32 mcp3911_scale_table[MCP3911_NUM_SCALES][2];
>  
> +enum mcp3911_id {
> +	MCP3910,
> +	MCP3911,
> +	MCP3912,
> +	MCP3913,
> +	MCP3914,
> +	MCP3918,
> +	MCP3919,
> +};
> +
>  struct mcp3911 {
>  	struct spi_device *spi;
>  	struct mutex lock;
> @@ -74,14 +106,15 @@ struct mcp3911 {
>  	struct clk *clki;
>  	u32 dev_addr;
>  	struct iio_trigger *trig;
> -	u32 gain[MCP3911_NUM_CHANNELS];
> +	u32 gain[MCP39XX_MAX_NUM_CHANNELS];
> +	enum mcp3911_id chipid;
>  	struct {
> -		u32 channels[MCP3911_NUM_CHANNELS];
> +		u32 channels[MCP39XX_MAX_NUM_CHANNELS];
>  		s64 ts __aligned(8);
>  	} scan;
>  
> -	u8 tx_buf __aligned(IIO_DMA_MINALIGN);
> -	u8 rx_buf[MCP3911_NUM_CHANNELS * 3];
> +	u8 tx_buf[MCP39XX_MAX_NUM_CHANNELS * 3] __aligned(IIO_DMA_MINALIGN);
> +	u8 rx_buf[MCP39XX_MAX_NUM_CHANNELS * 3];
>  };
>  
>  static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len)
> @@ -182,19 +215,28 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
>  		break;
>  
>  	case IIO_CHAN_INFO_OFFSET:
> -		ret = mcp3911_read(adc,
> -				   MCP3911_OFFCAL(channel->channel), val, 3);
> +		if (adc->chipid == MCP3911)

Avoid matching on chip IDs. It tends not to scale well. Much better to use
a callback or data in the chip_info structure for all such cases.
Then it's a simple lookup for the relevant device + one place to see all such
inter chip variations.

> +			ret = mcp3911_read(adc,
> +					   MCP3911_OFFCAL(channel->channel), val, 3);
> +		else
> +			ret = mcp3911_read(adc,
> +					   MCP39XX_OFFCAL(channel->channel), val, 3);
>  		if (ret)
>  			goto out;
>  
>  		ret = IIO_VAL_INT;
>  		break;
>  	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> -		ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
> +		if (adc->chipid == MCP3911) {

As above - make this data rather than code by adding to the chip_info structure.

> +			ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
> +			*val = FIELD_GET(MCP3911_CONFIG_OSR, *val);
> +		} else {
> +			ret = mcp3911_read(adc, MCP39XX_REG_CONFIG0, val, 3);
> +			*val = FIELD_GET(MCP39XX_CONFIG0_OSR, *val);
> +		}
>  		if (ret)
>  			goto out;
>  
> -		*val = FIELD_GET(MCP3911_CONFIG_OSR, *val);
>  		*val = 32 << *val;
>  		ret = IIO_VAL_INT;
>  		break;
> @@ -226,9 +268,15 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
>  				val2 == mcp3911_scale_table[i][1]) {
>  
>  				adc->gain[channel->channel] = BIT(i);
> -				ret = mcp3911_update(adc, MCP3911_REG_GAIN,
> -						MCP3911_GAIN_MASK(channel->channel),
> -						MCP3911_GAIN_VAL(channel->channel, i), 1);
> +
> +				if (adc->chipid == MCP3911)
> +					ret = mcp3911_update(adc, MCP3911_REG_GAIN,
> +							MCP3911_GAIN_MASK(channel->channel),
> +							MCP3911_GAIN_VAL(channel->channel, i), 1);
> +				else
> +					ret = mcp3911_update(adc, MCP39XX_REG_GAIN,
> +							MCP3911_GAIN_MASK(channel->channel),
> +							MCP3911_GAIN_VAL(channel->channel, i), 3);
>  			}
>  		}
>  		break;
> @@ -238,24 +286,45 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
>  			goto out;
>  		}
>  
> -		/* Write offset */
> -		ret = mcp3911_write(adc, MCP3911_OFFCAL(channel->channel), val,
> -				    3);
> -		if (ret)
> -			goto out;
> +		if (adc->chipid == MCP3911) {
> +			/* Write offset */
> +			ret = mcp3911_write(adc, MCP3911_OFFCAL(channel->channel), val,
> +					    3);
> +			if (ret)
> +				goto out;
> +
> +			/* Enable offset*/
> +			ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM,
> +					MCP3911_STATUSCOM_EN_OFFCAL,
> +					MCP3911_STATUSCOM_EN_OFFCAL, 2);
> +		} else {
> +			/* Write offset */
> +			ret = mcp3911_write(adc, MCP39XX_OFFCAL(channel->channel), val,
> +					    3);
> +			if (ret)
> +				goto out;
> +
> +			/* Enable offset*/
> +			ret = mcp3911_update(adc, MCP39XX_REG_CONFIG0,
> +					MCP39XX_CONFIG0_EN_OFFCAL,
> +					MCP39XX_CONFIG0_EN_OFFCAL, 3);
> +		}
>  
> -		/* Enable offset*/
> -		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM,
> -				MCP3911_STATUSCOM_EN_OFFCAL,
> -				MCP3911_STATUSCOM_EN_OFFCAL, 2);
>  		break;
>  
>  	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
>  		for (int i = 0; i < ARRAY_SIZE(mcp3911_osr_table); i++) {
>  			if (val == mcp3911_osr_table[i]) {
> -				val = FIELD_PREP(MCP3911_CONFIG_OSR, i);
> -				ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR,
> -						val, 2);
> +				if (adc->chipid == MCP3911) {
> +					val = FIELD_PREP(MCP3911_CONFIG_OSR, i);
> +					ret = mcp3911_update(adc, MCP3911_REG_CONFIG,
> +							MCP3911_CONFIG_OSR, val, 2);
> +
> +				} else {
> +					val = FIELD_PREP(MCP39XX_CONFIG0_OSR, i);
> +					ret = mcp3911_update(adc, MCP39XX_REG_CONFIG0,
> +							MCP39XX_CONFIG0_OSR, val, 3);
> +				}
>  				break;
>  			}
>  		}
> @@ -305,6 +374,11 @@ static int mcp3911_calc_scale_table(struct mcp3911 *adc)
>  	return 0;
>  }
>  
> +struct mcp3911_chip_info {

Move this up and add all the other variations (register addresses / masks / callbacks when it
gets complicated).

> +	const struct iio_chan_spec *channels;
> +	unsigned int num_channels;
> +};
> +
>  #define MCP3911_CHAN(idx) {					\
>  		.type = IIO_VOLTAGE,				\
>  		.indexed = 1,					\
> @@ -326,33 +400,108 @@ static int mcp3911_calc_scale_table(struct mcp3911 *adc)
>  		},						\
>  }
>  
> +static const struct iio_chan_spec mcp3910_channels[] = {
> +	MCP3911_CHAN(0),
> +	MCP3911_CHAN(1),
> +	IIO_CHAN_SOFT_TIMESTAMP(2),
> +};
> +
>  static const struct iio_chan_spec mcp3911_channels[] = {
>  	MCP3911_CHAN(0),
>  	MCP3911_CHAN(1),
>  	IIO_CHAN_SOFT_TIMESTAMP(2),
>  };
>  
> +static const struct iio_chan_spec mcp3912_channels[] = {
> +	MCP3911_CHAN(0),
> +	MCP3911_CHAN(1),
> +	MCP3911_CHAN(2),
> +	MCP3911_CHAN(3),
> +	IIO_CHAN_SOFT_TIMESTAMP(4),
> +};
> +
> +static const struct iio_chan_spec mcp3913_channels[] = {
> +	MCP3911_CHAN(0),
> +	MCP3911_CHAN(1),
> +	MCP3911_CHAN(2),
> +	MCP3911_CHAN(3),
> +	MCP3911_CHAN(4),
> +	MCP3911_CHAN(5),
> +	IIO_CHAN_SOFT_TIMESTAMP(6),
> +};
> +
> +static const struct iio_chan_spec mcp3914_channels[] = {
> +	MCP3911_CHAN(0),
> +	MCP3911_CHAN(1),
> +	MCP3911_CHAN(2),
> +	MCP3911_CHAN(3),
> +	MCP3911_CHAN(4),
> +	MCP3911_CHAN(5),
> +	MCP3911_CHAN(6),
> +	MCP3911_CHAN(7),
> +	IIO_CHAN_SOFT_TIMESTAMP(8),
> +};
> +
> +static const struct iio_chan_spec mcp3918_channels[] = {
> +	MCP3911_CHAN(0),
> +	IIO_CHAN_SOFT_TIMESTAMP(1),
> +};
> +
> +static const struct iio_chan_spec mcp3919_channels[] = {
> +	MCP3911_CHAN(0),
> +	MCP3911_CHAN(1),
> +	MCP3911_CHAN(2),
> +	IIO_CHAN_SOFT_TIMESTAMP(3),
> +};
> +
> +static const struct mcp3911_chip_info mcp3911_chip_info[] = {
> +	[MCP3910] = {
> +		.channels = mcp3910_channels,
> +		.num_channels = ARRAY_SIZE(mcp3910_channels),
> +	},
> +	[MCP3911] = {
> +		.channels = mcp3911_channels,
> +		.num_channels = ARRAY_SIZE(mcp3911_channels),
> +	},
> +	[MCP3912] = {
> +		.channels = mcp3912_channels,
> +		.num_channels = ARRAY_SIZE(mcp3912_channels),
> +	},
> +	[MCP3913] = {
> +		.channels = mcp3913_channels,
> +		.num_channels = ARRAY_SIZE(mcp3913_channels),
> +	},
> +	[MCP3914] = {
> +		.channels = mcp3914_channels,
> +		.num_channels = ARRAY_SIZE(mcp3914_channels),
> +	},
> +	[MCP3918] = {
> +		.channels = mcp3918_channels,
> +		.num_channels = ARRAY_SIZE(mcp3918_channels),
> +	},
> +	[MCP3919] = {
> +		.channels = mcp3919_channels,
> +		.num_channels = ARRAY_SIZE(mcp3919_channels),
> +	},
> +};
> +
>  static irqreturn_t mcp3911_trigger_handler(int irq, void *p)
>  {
>  	struct iio_poll_func *pf = p;
>  	struct iio_dev *indio_dev = pf->indio_dev;
>  	struct mcp3911 *adc = iio_priv(indio_dev);
> -	struct spi_transfer xfer[] = {
> -		{
> -			.tx_buf = &adc->tx_buf,
> -			.len = 1,
> -		}, {
> -			.rx_buf = adc->rx_buf,
> -			.len = sizeof(adc->rx_buf),
> -		},
> +	struct spi_transfer xfer = {
> +		.tx_buf = adc->tx_buf,

Why switch to a single more complex transfer?  This looks like an unrelated
change.  Also, could spi_write_then_read be used to simplify this further?


> +		.rx_buf = adc->rx_buf,
> +		.len = (mcp3911_chip_info[adc->chipid].num_channels - 1) * 3,
>  	};
>  	int scan_index;
>  	int i = 0;
>  	int ret;
>  
>  	mutex_lock(&adc->lock);
> -	adc->tx_buf = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr);
> -	ret = spi_sync_transfer(adc->spi, xfer, ARRAY_SIZE(xfer));
> +	adc->tx_buf[0] = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr);
> +	ret = spi_sync_transfer(adc->spi, &xfer, 1);
>  	if (ret < 0) {
>  		dev_warn(&adc->spi->dev,
>  				"failed to get conversion data\n");
> @@ -383,26 +532,9 @@ static const struct iio_info mcp3911_info = {
>  
>  static int mcp3911_config(struct mcp3911 *adc)
>  {
> -	struct device *dev = &adc->spi->dev;
>  	u32 regval;
>  	int ret;
>  
> -	ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
> -
> -	/*
> -	 * Fallback to "device-addr" due to historical mismatch between
> -	 * dt-bindings and implementation
> -	 */
> -	if (ret)
> -		device_property_read_u32(dev, "device-addr", &adc->dev_addr);
> -	if (adc->dev_addr > 3) {
> -		dev_err(&adc->spi->dev,
> -			"invalid device address (%i). Must be in range 0-3.\n",
> -			adc->dev_addr);
> -		return -EINVAL;
> -	}
> -	dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr);
> -
>  	ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &regval, 2);
>  	if (ret)
>  		return ret;
> @@ -439,7 +571,102 @@ static int mcp3911_config(struct mcp3911 *adc)
>  	regval &= ~MCP3911_STATUSCOM_READ;
>  	regval |= FIELD_PREP(MCP3911_STATUSCOM_READ, 0x02);
>  
> -	return  mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2);
> +	regval &= ~MCP3911_STATUSCOM_DRHIZ;
> +	if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz"))
> +		regval |= FIELD_PREP(MCP3911_STATUSCOM_DRHIZ, 0);
> +	else
> +		regval |= FIELD_PREP(MCP3911_STATUSCOM_DRHIZ, 1);
> +
> +	/* Disable offset to ignore any old values in offset register*/
> +	regval &= ~MCP3911_STATUSCOM_EN_OFFCAL;
> +
> +	ret =  mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2);
> +	if (ret)
> +		return ret;
> +
> +       /* Set gain to 1 for all channels */
> +	ret = mcp3911_read(adc, MCP3911_REG_GAIN, &regval, 1);
> +	if (ret)
> +		return ret;
> +
> +	for (int i = 0; i < mcp3911_chip_info[adc->chipid].num_channels - 1; i++) {
> +		adc->gain[i] = 1;
> +		regval &= ~MCP3911_GAIN_MASK(i);
> +	}
> +	return mcp3911_write(adc, MCP3911_REG_GAIN, regval, 1);
> +
> +
> +}
> +
> +static int mcp39xx_config(struct mcp3911 *adc)
> +{
> +	u32 regval;
> +	int ret;
> +
> +	ret = mcp3911_read(adc, MCP39XX_REG_CONFIG1, &regval, 3);
> +	if (ret)
> +		return ret;
> +
> +	regval &= ~MCP39XX_CONFIG1_VREFEXT;
> +	if (adc->vref) {
> +		dev_dbg(&adc->spi->dev, "use external voltage reference\n");
> +		regval |= FIELD_PREP(MCP39XX_CONFIG1_VREFEXT, 1);
> +	} else {
> +		dev_dbg(&adc->spi->dev,
> +			"use internal voltage reference (1.2V)\n");
> +		regval |= FIELD_PREP(MCP39XX_CONFIG1_VREFEXT, 0);
> +	}
> +
> +	regval &= ~MCP39XX_CONFIG1_CLKEXT;
> +	if (adc->clki) {
> +		dev_dbg(&adc->spi->dev, "use external clock as clocksource\n");
> +		regval |= FIELD_PREP(MCP39XX_CONFIG1_CLKEXT, 1);
> +	} else {
> +		dev_dbg(&adc->spi->dev,
> +			"use crystal oscillator as clocksource\n");
> +		regval |= FIELD_PREP(MCP39XX_CONFIG1_CLKEXT, 0);
> +	}
> +
> +	ret = mcp3911_write(adc, MCP39XX_REG_CONFIG1, regval, 3);
> +	if (ret)
> +		return ret;
> +
> +	ret = mcp3911_read(adc, MCP39XX_REG_STATUSCOM, &regval, 3);
> +	if (ret)
> +		return ret;
> +
> +	/* Address counter incremented, cycle through register types */
> +	regval &= ~MCP39XX_STATUSCOM_READ;
> +	regval |= FIELD_PREP(MCP39XX_STATUSCOM_READ, 0x02);
> +
> +
> +	regval &= ~MCP39XX_STATUSCOM_DRHIZ;
> +	if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz"))
> +		regval |= FIELD_PREP(MCP39XX_STATUSCOM_DRHIZ, 0);
> +	else
> +		regval |= FIELD_PREP(MCP39XX_STATUSCOM_DRHIZ, 1);
> +
> +	ret = mcp3911_write(adc, MCP39XX_REG_STATUSCOM, regval, 3);
> +	if (ret)
> +		return ret;
> +
> +       /* Set gain to 1 for all channels */
> +	ret = mcp3911_read(adc, MCP39XX_REG_GAIN, &regval, 3);
> +	if (ret)
> +		return ret;
> +
> +	for (int i = 0; i < mcp3911_chip_info[adc->chipid].num_channels - 1; i++) {
> +		adc->gain[i] = 1;
> +		regval &= ~MCP3911_GAIN_MASK(i);
> +	}
> +	ret = mcp3911_write(adc, MCP39XX_REG_GAIN, regval, 3);
> +	if (ret)
> +		return ret;
> +
> +	/* Disable offset to ignore any old values in offset register*/
> +	return mcp3911_update(adc, MCP39XX_REG_CONFIG0,
> +				MCP39XX_CONFIG0_EN_OFFCAL,
> +				MCP39XX_CONFIG0_EN_OFFCAL, 3);
>  }
>  
>  static void mcp3911_cleanup_regulator(void *vref)
> @@ -476,6 +703,7 @@ static int mcp3911_probe(struct spi_device *spi)
>  
>  	adc = iio_priv(indio_dev);
>  	adc->spi = spi;
> +	adc->chipid = spi_get_device_id(spi)->driver_data;
>  
>  	adc->vref = devm_regulator_get_optional(&adc->spi->dev, "vref");
>  	if (IS_ERR(adc->vref)) {
> @@ -511,16 +739,27 @@ static int mcp3911_probe(struct spi_device *spi)
>  		}
>  	}
>  
> -	ret = mcp3911_config(adc);
> +	ret = device_property_read_u32(&adc->spi->dev, "microchip,device-addr", &adc->dev_addr);
> +
> +	/*
> +	 * Fallback to "device-addr" due to historical mismatch between
> +	 * dt-bindings and implementation
> +	 */
>  	if (ret)
> -		return ret;
> +		device_property_read_u32(&adc->spi->dev, "device-addr", &adc->dev_addr);
> +	if (adc->dev_addr > 3) {
> +		dev_err(&adc->spi->dev,
> +			"invalid device address (%i). Must be in range 0-3.\n",
> +			adc->dev_addr);
> +		return -EINVAL;
> +	}
> +	dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr);
>  
> -	if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz"))
> -		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
> -				0, 2);
> +
> +	if (adc->chipid == MCP3911)
> +		ret = mcp3911_config(adc);
>  	else
> -		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
> -				MCP3911_STATUSCOM_DRHIZ, 2);
> +		ret = mcp39xx_config(adc);
>  	if (ret)
>  		return ret;
>  
> @@ -529,7 +768,7 @@ static int mcp3911_probe(struct spi_device *spi)
>  		return ret;
>  
>         /* Set gain to 1 for all channels */
> -	for (int i = 0; i < MCP3911_NUM_CHANNELS; i++) {
> +	for (int i = 0; i < mcp3911_chip_info[adc->chipid].num_channels - 1; i++) {
>  		adc->gain[i] = 1;
>  		ret = mcp3911_update(adc, MCP3911_REG_GAIN,
>  				MCP3911_GAIN_MASK(i),
> @@ -543,8 +782,8 @@ static int mcp3911_probe(struct spi_device *spi)
>  	indio_dev->info = &mcp3911_info;
>  	spi_set_drvdata(spi, indio_dev);
>  
> -	indio_dev->channels = mcp3911_channels;
> -	indio_dev->num_channels = ARRAY_SIZE(mcp3911_channels);
> +	indio_dev->channels = mcp3911_chip_info[adc->chipid].channels;
> +	indio_dev->num_channels = mcp3911_chip_info[adc->chipid].num_channels;
>  
>  	mutex_init(&adc->lock);
>  
> @@ -583,13 +822,25 @@ static int mcp3911_probe(struct spi_device *spi)
>  }
>  
>  static const struct of_device_id mcp3911_dt_ids[] = {
> +	{ .compatible = "microchip,mcp3910" },
>  	{ .compatible = "microchip,mcp3911" },
> +	{ .compatible = "microchip,mcp3912" },
> +	{ .compatible = "microchip,mcp3913" },
> +	{ .compatible = "microchip,mcp3914" },
> +	{ .compatible = "microchip,mcp3918" },
> +	{ .compatible = "microchip,mcp3919" },

I'm not keen on relying on the lookups that fallback to the spi_device_id
table when looking for match data.
There tend to be corner cases that go wrong such as a fallback compatible
form a different one (which we don't know about yet as it is a new device)
The match can then happen on the ID that isn't in the table below and fail.

As such I'd like to see match data in both tables via
spi_get_device_match_data()



>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, mcp3911_dt_ids);
>  
>  static const struct spi_device_id mcp3911_id[] = {
> -	{ "mcp3911", 0 },
> +	{ "mcp3910", MCP3910 },

Prefer to see pointers used in here rather than enum values as that
works more naturally with the types of data in spi and i2c tables.


> +	{ "mcp3911", MCP3911 },
> +	{ "mcp3912", MCP3912 },
> +	{ "mcp3913", MCP3913 },
> +	{ "mcp3914", MCP3914 },
> +	{ "mcp3918", MCP3918 },
> +	{ "mcp3919", MCP3919 },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(spi, mcp3911_id);