diff mbox series

[1/2] ARM: dts: qcom: apq8064: drop incorrect regulator-type

Message ID 20230725164917.371714-1-krzysztof.kozlowski@linaro.org
State New
Headers
Series [1/2] ARM: dts: qcom: apq8064: drop incorrect regulator-type |

Commit Message

Krzysztof Kozlowski July 25, 2023, 4:49 p.m. UTC 
  regulator-fixed does not have a "regulator-type" property:

  qcom-apq8064-ifc6410.dtb: regulator-ext-3p3v: Unevaluated properties are not allowed ('regulator-type' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 1 -
 arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts         | 1 -
 2 files changed, 2 deletions(-)

Comments

Konrad Dybcio July 26, 2023, 1:08 p.m. UTC | #1 
On 25.07.2023 18:49, Krzysztof Kozlowski wrote:
> regulator-fixed does not have a "regulator-type" property:
> 
>   qcom-apq8064-ifc6410.dtb: regulator-ext-3p3v: Unevaluated properties are not allowed ('regulator-type' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index c57c27cd8a20..c0dd6399f597 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -36,7 +36,6 @@  ext_3p3v: regulator-ext-3p3v {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "ext_3p3v";
-		regulator-type = "voltage";
 		startup-delay-us = <0>;
 		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index 96307550523a..b0c5e7bd5e74 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -58,7 +58,6 @@  ext_3p3v: regulator-ext-3p3v {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "ext_3p3v";
-		regulator-type = "voltage";
 		startup-delay-us = <0>;
 		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
 		enable-active-high;