diff mbox series

[v5,6/6] soc: qcom: llcc: Add QDU1000 and QRU1000 LLCC support

Message ID 20230724084155.8682-7-quic_kbajaj@quicinc.com
State New
Headers
Series soc: qcom: llcc: Add support for QDU1000/QRU1000 |

Commit Message

Komal Bajaj July 24, 2023, 8:41 a.m. UTC 
  Add LLCC configuration data for QDU1000 and QRU1000 SoCs.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
 drivers/soc/qcom/llcc-qcom.c | 67 ++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

Comments

Mukesh Ojha July 24, 2023, 12:45 p.m. UTC | #1 
On 7/24/2023 2:11 PM, Komal Bajaj wrote:
> Add LLCC configuration data for QDU1000 and QRU1000 SoCs.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
>   drivers/soc/qcom/llcc-qcom.c | 67 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 67 insertions(+)
> 
> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> index 228ffb4a8971..95766260b3b8 100644
> --- a/drivers/soc/qcom/llcc-qcom.c
> +++ b/drivers/soc/qcom/llcc-qcom.c
> @@ -364,6 +364,36 @@ static const struct llcc_slice_config sm8550_data[] =  {
>   	{LLCC_VIDVSP,   28,  256, 4, 1, 0xFFFFFF, 0x0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
>   };
>   
> +static const struct llcc_slice_config qdu1000_data_2ch[] = {
> +	{ LLCC_MDMHPGRW, 7, 512, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_MODHW,    9, 256, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_MDMPNG,  21, 256, 0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_ECC,     26, 512, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
> +	{ LLCC_MODPE,   29, 256, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_APTCM,   30, 256, 3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_WRCACHE, 31, 128, 1, 1, 0x3,   0x0, 0, 0, 0, 0, 1, 0, 0 },
> +};
> +
> +static const struct llcc_slice_config qdu1000_data_4ch[] = {
> +	{ LLCC_MDMHPGRW, 7, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_MODHW,    9, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_MDMPNG,  21, 512,  0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_ECC,     26, 1024, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
> +	{ LLCC_MODPE,   29, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_APTCM,   30, 512,  3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_WRCACHE, 31, 256,  1, 1, 0x3,   0x0, 0, 0, 0, 0, 1, 0, 0 },
> +};
> +
> +static const struct llcc_slice_config qdu1000_data_8ch[] = {
> +	{ LLCC_MDMHPGRW, 7, 2048, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_MODHW,    9, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_MDMPNG,  21, 1024, 0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_ECC,     26, 2048, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
> +	{ LLCC_MODPE,   29, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_APTCM,   30, 1024, 3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_WRCACHE, 31, 512,  1, 1, 0x3,   0x0, 0, 0, 0, 0, 1, 0, 0 },
> +};
> +
>   static const struct llcc_edac_reg_offset llcc_v1_edac_reg_offset = {
>   	.trp_ecc_error_status0 = 0x20344,
>   	.trp_ecc_error_status1 = 0x20348,
> @@ -551,6 +581,37 @@ static const struct qcom_llcc_config sm8550_cfg[] = {
>   	},
>   };
>   
> +static const struct qcom_llcc_config qdu1000_cfg[] = {
> +	{
> +		.sct_data       = qdu1000_data_8ch,
> +		.size		= ARRAY_SIZE(qdu1000_data_8ch),
> +		.need_llcc_cfg	= true,
> +		.reg_offset	= llcc_v2_1_reg_offset,
> +		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
> +	},
> +	{
> +		.sct_data       = qdu1000_data_4ch,
> +		.size           = ARRAY_SIZE(qdu1000_data_4ch),
> +		.need_llcc_cfg  = true,
> +		.reg_offset     = llcc_v2_1_reg_offset,
> +		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
> +	},
> +	{
> +		.sct_data       = qdu1000_data_4ch,
> +		.size           = ARRAY_SIZE(qdu1000_data_4ch),
> +		.need_llcc_cfg  = true,
> +		.reg_offset     = llcc_v2_1_reg_offset,
> +		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
> +	},
> +	{
> +		.sct_data       = qdu1000_data_2ch,
> +		.size           = ARRAY_SIZE(qdu1000_data_2ch),
> +		.need_llcc_cfg  = true,
> +		.reg_offset     = llcc_v2_1_reg_offset,
> +		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
> +	},
> +};
> +
>   static const struct qcom_sct_config sc7180_cfgs = {
>   	.llcc_config	= sc7180_cfg,
>   	.num_cfgs	= 1,
> @@ -611,6 +672,11 @@ static const struct qcom_sct_config sm8550_cfgs = {
>   	.num_cfgs	= 1,
>   };
>   
> +static const struct qcom_sct_config qdu1000_cfgs = {
> +	.llcc_config	= qdu1000_cfg,
> +	.num_cfgs	= 1,


Should not this be 4 ?

-Mukesh

> +};
> +
>   static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
>   
>   /**
> @@ -1167,6 +1233,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
>   }
>   
>   static const struct of_device_id qcom_llcc_of_match[] = {
> +	{ .compatible = "qcom,qdu1000-llcc", .data = &qdu1000_cfgs},
>   	{ .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfgs },
>   	{ .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfgs },
>   	{ .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfgs },
Konrad Dybcio July 24, 2023, 12:54 p.m. UTC | #2 
On 24.07.2023 10:41, Komal Bajaj wrote:
> Add LLCC configuration data for QDU1000 and QRU1000 SoCs.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
>  drivers/soc/qcom/llcc-qcom.c | 67 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> index 228ffb4a8971..95766260b3b8 100644
> --- a/drivers/soc/qcom/llcc-qcom.c
> +++ b/drivers/soc/qcom/llcc-qcom.c
> @@ -364,6 +364,36 @@ static const struct llcc_slice_config sm8550_data[] =  {
>  	{LLCC_VIDVSP,   28,  256, 4, 1, 0xFFFFFF, 0x0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
>  };
>  
> +static const struct llcc_slice_config qdu1000_data_2ch[] = {
> +	{ LLCC_MDMHPGRW, 7, 512, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_MODHW,    9, 256, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_MDMPNG,  21, 256, 0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_ECC,     26, 512, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
> +	{ LLCC_MODPE,   29, 256, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
> +	{ LLCC_APTCM,   30, 256, 3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
Please use lowercase hex.

Konrad
Konrad Dybcio July 24, 2023, 12:55 p.m. UTC | #3 
On 24.07.2023 14:45, Mukesh Ojha wrote:
> 
> 
> On 7/24/2023 2:11 PM, Komal Bajaj wrote:
>> Add LLCC configuration data for QDU1000 and QRU1000 SoCs.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
[...]

>>   static const struct qcom_sct_config sc7180_cfgs = {
>>       .llcc_config    = sc7180_cfg,
>>       .num_cfgs    = 1,
>> @@ -611,6 +672,11 @@ static const struct qcom_sct_config sm8550_cfgs = {
>>       .num_cfgs    = 1,
>>   };
>>   +static const struct qcom_sct_config qdu1000_cfgs = {
>> +    .llcc_config    = qdu1000_cfg,
>> +    .num_cfgs    = 1,
> 
> 
> Should not this be 4 ?
Even better, use ARRAY_SIZE(name_of_arr)

Konrad
Komal Bajaj Aug. 2, 2023, 8:57 a.m. UTC | #4 
On 7/24/2023 6:15 PM, Mukesh Ojha wrote:
>
>
> On 7/24/2023 2:11 PM, Komal Bajaj wrote:
>> Add LLCC configuration data for QDU1000 and QRU1000 SoCs.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>>   drivers/soc/qcom/llcc-qcom.c | 67 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 67 insertions(+)
>>
>> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
>> index 228ffb4a8971..95766260b3b8 100644
>> --- a/drivers/soc/qcom/llcc-qcom.c
>> +++ b/drivers/soc/qcom/llcc-qcom.c
>> @@ -364,6 +364,36 @@ static const struct llcc_slice_config 
>> sm8550_data[] =  {
>>       {LLCC_VIDVSP,   28,  256, 4, 1, 0xFFFFFF, 0x0,   0, 0, 0, 0, 0, 
>> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
>>   };
>>   +static const struct llcc_slice_config qdu1000_data_2ch[] = {
>> +    { LLCC_MDMHPGRW, 7, 512, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_MODHW,    9, 256, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_MDMPNG,  21, 256, 0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_ECC,     26, 512, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
>> +    { LLCC_MODPE,   29, 256, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_APTCM,   30, 256, 3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_WRCACHE, 31, 128, 1, 1, 0x3,   0x0, 0, 0, 0, 0, 1, 0, 0 },
>> +};
>> +
>> +static const struct llcc_slice_config qdu1000_data_4ch[] = {
>> +    { LLCC_MDMHPGRW, 7, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_MODHW,    9, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_MDMPNG,  21, 512,  0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_ECC,     26, 1024, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
>> +    { LLCC_MODPE,   29, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_APTCM,   30, 512,  3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_WRCACHE, 31, 256,  1, 1, 0x3,   0x0, 0, 0, 0, 0, 1, 0, 0 },
>> +};
>> +
>> +static const struct llcc_slice_config qdu1000_data_8ch[] = {
>> +    { LLCC_MDMHPGRW, 7, 2048, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_MODHW,    9, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_MDMPNG,  21, 1024, 0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_ECC,     26, 2048, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
>> +    { LLCC_MODPE,   29, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_APTCM,   30, 1024, 3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
>> +    { LLCC_WRCACHE, 31, 512,  1, 1, 0x3,   0x0, 0, 0, 0, 0, 1, 0, 0 },
>> +};
>> +
>>   static const struct llcc_edac_reg_offset llcc_v1_edac_reg_offset = {
>>       .trp_ecc_error_status0 = 0x20344,
>>       .trp_ecc_error_status1 = 0x20348,
>> @@ -551,6 +581,37 @@ static const struct qcom_llcc_config 
>> sm8550_cfg[] = {
>>       },
>>   };
>>   +static const struct qcom_llcc_config qdu1000_cfg[] = {
>> +    {
>> +        .sct_data       = qdu1000_data_8ch,
>> +        .size        = ARRAY_SIZE(qdu1000_data_8ch),
>> +        .need_llcc_cfg    = true,
>> +        .reg_offset    = llcc_v2_1_reg_offset,
>> +        .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>> +    },
>> +    {
>> +        .sct_data       = qdu1000_data_4ch,
>> +        .size           = ARRAY_SIZE(qdu1000_data_4ch),
>> +        .need_llcc_cfg  = true,
>> +        .reg_offset     = llcc_v2_1_reg_offset,
>> +        .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>> +    },
>> +    {
>> +        .sct_data       = qdu1000_data_4ch,
>> +        .size           = ARRAY_SIZE(qdu1000_data_4ch),
>> +        .need_llcc_cfg  = true,
>> +        .reg_offset     = llcc_v2_1_reg_offset,
>> +        .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>> +    },
>> +    {
>> +        .sct_data       = qdu1000_data_2ch,
>> +        .size           = ARRAY_SIZE(qdu1000_data_2ch),
>> +        .need_llcc_cfg  = true,
>> +        .reg_offset     = llcc_v2_1_reg_offset,
>> +        .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>> +    },
>> +};
>> +
>>   static const struct qcom_sct_config sc7180_cfgs = {
>>       .llcc_config    = sc7180_cfg,
>>       .num_cfgs    = 1,
>> @@ -611,6 +672,11 @@ static const struct qcom_sct_config sm8550_cfgs = {
>>       .num_cfgs    = 1,
>>   };
>>   +static const struct qcom_sct_config qdu1000_cfgs = {
>> +    .llcc_config    = qdu1000_cfg,
>> +    .num_cfgs    = 1,
>
>
> Should not this be 4 ?

Yes, it should be 4. Thanks for pointing it out.

-Komal

>
> -Mukesh
>
>> +};
>> +
>>   static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
>>     /**
>> @@ -1167,6 +1233,7 @@ static int qcom_llcc_probe(struct 
>> platform_device *pdev)
>>   }
>>     static const struct of_device_id qcom_llcc_of_match[] = {
>> +    { .compatible = "qcom,qdu1000-llcc", .data = &qdu1000_cfgs},
>>       { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfgs },
>>       { .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfgs },
>>       { .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfgs },
Komal Bajaj Aug. 2, 2023, 9 a.m. UTC | #5 
On 7/24/2023 6:25 PM, Konrad Dybcio wrote:
> On 24.07.2023 14:45, Mukesh Ojha wrote:
>>
>> On 7/24/2023 2:11 PM, Komal Bajaj wrote:
>>> Add LLCC configuration data for QDU1000 and QRU1000 SoCs.
>>>
>>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>>> ---
> [...]
>
>>>    static const struct qcom_sct_config sc7180_cfgs = {
>>>        .llcc_config    = sc7180_cfg,
>>>        .num_cfgs    = 1,
>>> @@ -611,6 +672,11 @@ static const struct qcom_sct_config sm8550_cfgs = {
>>>        .num_cfgs    = 1,
>>>    };
>>>    +static const struct qcom_sct_config qdu1000_cfgs = {
>>> +    .llcc_config    = qdu1000_cfg,
>>> +    .num_cfgs    = 1,
>>
>> Should not this be 4 ?
> Even better, use ARRAY_SIZE(name_of_arr)

Yes, Thanks for suggesting it.

-Komal

>
> Konrad
diff mbox series

Patch

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 228ffb4a8971..95766260b3b8 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -364,6 +364,36 @@  static const struct llcc_slice_config sm8550_data[] =  {
 	{LLCC_VIDVSP,   28,  256, 4, 1, 0xFFFFFF, 0x0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
 };
 
+static const struct llcc_slice_config qdu1000_data_2ch[] = {
+	{ LLCC_MDMHPGRW, 7, 512, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_MODHW,    9, 256, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_MDMPNG,  21, 256, 0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_ECC,     26, 512, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_MODPE,   29, 256, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_APTCM,   30, 256, 3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_WRCACHE, 31, 128, 1, 1, 0x3,   0x0, 0, 0, 0, 0, 1, 0, 0 },
+};
+
+static const struct llcc_slice_config qdu1000_data_4ch[] = {
+	{ LLCC_MDMHPGRW, 7, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_MODHW,    9, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_MDMPNG,  21, 512,  0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_ECC,     26, 1024, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_MODPE,   29, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_APTCM,   30, 512,  3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_WRCACHE, 31, 256,  1, 1, 0x3,   0x0, 0, 0, 0, 0, 1, 0, 0 },
+};
+
+static const struct llcc_slice_config qdu1000_data_8ch[] = {
+	{ LLCC_MDMHPGRW, 7, 2048, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_MODHW,    9, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_MDMPNG,  21, 1024, 0, 1, 0x3,   0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_ECC,     26, 2048, 3, 1, 0xffc, 0x0, 0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_MODPE,   29, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_APTCM,   30, 1024, 3, 1, 0x0,   0xC, 1, 0, 0, 1, 0, 0, 0 },
+	{ LLCC_WRCACHE, 31, 512,  1, 1, 0x3,   0x0, 0, 0, 0, 0, 1, 0, 0 },
+};
+
 static const struct llcc_edac_reg_offset llcc_v1_edac_reg_offset = {
 	.trp_ecc_error_status0 = 0x20344,
 	.trp_ecc_error_status1 = 0x20348,
@@ -551,6 +581,37 @@  static const struct qcom_llcc_config sm8550_cfg[] = {
 	},
 };
 
+static const struct qcom_llcc_config qdu1000_cfg[] = {
+	{
+		.sct_data       = qdu1000_data_8ch,
+		.size		= ARRAY_SIZE(qdu1000_data_8ch),
+		.need_llcc_cfg	= true,
+		.reg_offset	= llcc_v2_1_reg_offset,
+		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+	},
+	{
+		.sct_data       = qdu1000_data_4ch,
+		.size           = ARRAY_SIZE(qdu1000_data_4ch),
+		.need_llcc_cfg  = true,
+		.reg_offset     = llcc_v2_1_reg_offset,
+		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+	},
+	{
+		.sct_data       = qdu1000_data_4ch,
+		.size           = ARRAY_SIZE(qdu1000_data_4ch),
+		.need_llcc_cfg  = true,
+		.reg_offset     = llcc_v2_1_reg_offset,
+		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+	},
+	{
+		.sct_data       = qdu1000_data_2ch,
+		.size           = ARRAY_SIZE(qdu1000_data_2ch),
+		.need_llcc_cfg  = true,
+		.reg_offset     = llcc_v2_1_reg_offset,
+		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+	},
+};
+
 static const struct qcom_sct_config sc7180_cfgs = {
 	.llcc_config	= sc7180_cfg,
 	.num_cfgs	= 1,
@@ -611,6 +672,11 @@  static const struct qcom_sct_config sm8550_cfgs = {
 	.num_cfgs	= 1,
 };
 
+static const struct qcom_sct_config qdu1000_cfgs = {
+	.llcc_config	= qdu1000_cfg,
+	.num_cfgs	= 1,
+};
+
 static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
 
 /**
@@ -1167,6 +1233,7 @@  static int qcom_llcc_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_llcc_of_match[] = {
+	{ .compatible = "qcom,qdu1000-llcc", .data = &qdu1000_cfgs},
 	{ .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfgs },
 	{ .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfgs },
 	{ .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfgs },