[v5,2/6] soc: qcom: llcc: Refactor llcc driver to support multiple configuration
Commit Message
Refactor driver to support multiple configuration for llcc on a target.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
drivers/soc/qcom/llcc-qcom.c | 264 +++++++++++++++++++++++------------
1 file changed, 178 insertions(+), 86 deletions(-)
Comments
On 7/24/2023 2:11 PM, Komal Bajaj wrote:
> Refactor driver to support multiple configuration for llcc on a target.
>
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
> drivers/soc/qcom/llcc-qcom.c | 264 +++++++++++++++++++++++------------
> 1 file changed, 178 insertions(+), 86 deletions(-)
>
> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> index 67c19ed2219a..321f8d2079f7 100644
> --- a/drivers/soc/qcom/llcc-qcom.c
> +++ b/drivers/soc/qcom/llcc-qcom.c
> @@ -127,6 +127,12 @@ struct qcom_llcc_config {
> bool no_edac;
> };
>
> +struct qcom_sct_config
const ?
> + const struct qcom_llcc_config *llcc_config;
> + int num_cfgs;
> +};
> +
> +
> enum llcc_reg_offset {
> LLCC_COMMON_HW_INFO,
> LLCC_COMMON_STATUS0,
> @@ -423,101 +429,185 @@ static const u32 llcc_v2_1_reg_offset[] = {
> [LLCC_COMMON_STATUS0] = 0x0003400c,
> };
>
> -static const struct qcom_llcc_config sc7180_cfg = {
> - .sct_data = sc7180_data,
> - .size = ARRAY_SIZE(sc7180_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> +static const struct qcom_llcc_config sc7180_cfg[] = {
> + {
> + .sct_data = sc7180_data,
> + .size = ARRAY_SIZE(sc7180_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sc7280_cfg[] = {
> + {
> + .sct_data = sc7280_data,
> + .size = ARRAY_SIZE(sc7280_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sc8180x_cfg[] = {
> + {
> + .sct_data = sc8180x_data,
> + .size = ARRAY_SIZE(sc8180x_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sc8280xp_cfg[] = {
> + {
> + .sct_data = sc8280xp_data,
> + .size = ARRAY_SIZE(sc8280xp_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sdm845_cfg[] = {
> + {
> + .sct_data = sdm845_data,
> + .size = ARRAY_SIZE(sdm845_data),
> + .need_llcc_cfg = false,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + .no_edac = true,
> + },
> +};
> +
> +static const struct qcom_llcc_config sm6350_cfg[] = {
> + {
> + .sct_data = sm6350_data,
> + .size = ARRAY_SIZE(sm6350_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sm7150_cfg[] = {
> + {
> + .sct_data = sm7150_data,
> + .size = ARRAY_SIZE(sm7150_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sm8150_cfg[] = {
> + {
> + .sct_data = sm8150_data,
> + .size = ARRAY_SIZE(sm8150_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sm8250_cfg[] = {
> + {
> + .sct_data = sm8250_data,
> + .size = ARRAY_SIZE(sm8250_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sm8350_cfg[] = {
> + {
> + .sct_data = sm8350_data,
> + .size = ARRAY_SIZE(sm8350_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v1_reg_offset,
> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sm8450_cfg[] = {
> + {
> + .sct_data = sm8450_data,
> + .size = ARRAY_SIZE(sm8450_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v2_1_reg_offset,
> + .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_llcc_config sm8550_cfg[] = {
> + {
> + .sct_data = sm8550_data,
> + .size = ARRAY_SIZE(sm8550_data),
> + .need_llcc_cfg = true,
> + .reg_offset = llcc_v2_1_reg_offset,
> + .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
> + },
> +};
> +
> +static const struct qcom_sct_config sc7180_cfgs = {
> + .llcc_config = sc7180_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sc7280_cfg = {
> - .sct_data = sc7280_data,
> - .size = ARRAY_SIZE(sc7280_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> +static const struct qcom_sct_config sc7280_cfgs = {
> + .llcc_config = sc7280_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sc8180x_cfg = {
> - .sct_data = sc8180x_data,
> - .size = ARRAY_SIZE(sc8180x_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> +static const struct qcom_sct_config sc8180x_cfgs = {
> + .llcc_config = sc8180x_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sc8280xp_cfg = {
> - .sct_data = sc8280xp_data,
> - .size = ARRAY_SIZE(sc8280xp_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> +static const struct qcom_sct_config sc8280xp_cfgs = {
> + .llcc_config = sc8280xp_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sdm845_cfg = {
> - .sct_data = sdm845_data,
> - .size = ARRAY_SIZE(sdm845_data),
> - .need_llcc_cfg = false,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> - .no_edac = true,
> +static const struct qcom_sct_config sdm845_cfgs = {
> + .llcc_config = sdm845_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sm6350_cfg = {
> - .sct_data = sm6350_data,
> - .size = ARRAY_SIZE(sm6350_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> +static const struct qcom_sct_config sm6350_cfgs = {
> + .llcc_config = sm6350_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sm7150_cfg = {
> - .sct_data = sm7150_data,
> - .size = ARRAY_SIZE(sm7150_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> +static const struct qcom_sct_config sm7150_cfgs = {
> + .llcc_config = sm7150_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sm8150_cfg = {
> - .sct_data = sm8150_data,
> - .size = ARRAY_SIZE(sm8150_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> +static const struct qcom_sct_config sm8150_cfgs = {
> + .llcc_config = sm8150_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sm8250_cfg = {
> - .sct_data = sm8250_data,
> - .size = ARRAY_SIZE(sm8250_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> +static const struct qcom_sct_config sm8250_cfgs = {
> + .llcc_config = sm8250_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sm8350_cfg = {
> - .sct_data = sm8350_data,
> - .size = ARRAY_SIZE(sm8350_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v1_reg_offset,
> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
> +static const struct qcom_sct_config sm8350_cfgs = {
> + .llcc_config = sm8350_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sm8450_cfg = {
> - .sct_data = sm8450_data,
> - .size = ARRAY_SIZE(sm8450_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v2_1_reg_offset,
> - .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
> +static const struct qcom_sct_config sm8450_cfgs = {
> + .llcc_config = sm8450_cfg,
> + .num_cfgs = 1,
> };
>
> -static const struct qcom_llcc_config sm8550_cfg = {
> - .sct_data = sm8550_data,
> - .size = ARRAY_SIZE(sm8550_data),
> - .need_llcc_cfg = true,
> - .reg_offset = llcc_v2_1_reg_offset,
> - .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
> +static const struct qcom_sct_config sm8550_cfgs = {
> + .llcc_config = sm8550_cfg,
> + .num_cfgs = 1,
num prefix itself take care of singular/plural, num_config would do
good.
> };
>
> static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
> @@ -939,6 +1029,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
> int ret, i;
> struct platform_device *llcc_edac;
> + const struct qcom_sct_config *cfgs;
> const struct qcom_llcc_config *cfg;
> const struct llcc_slice_config *llcc_cfg;
> u32 sz;
> @@ -958,7 +1049,8 @@ static int qcom_llcc_probe(struct platform_device *pdev)
> goto err;
> }
>
> - cfg = of_device_get_match_data(&pdev->dev);
> + cfgs = of_device_get_match_data(&pdev->dev);
> + cfg = &cfgs->llcc_config[0];
Hardcoding without check ?
#define DEFAULT_NUM_CFG 1
if (cfgs->num_cfgs != DEFAULT_NUM_CFG)
ret = -EINVAL;
goto err;
cfg = &cfgs->llcc_config[DEFAULT_NUM_CFG - 1];
I would let others comment as well..
-Mukesh
>
> ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
> if (ret)
> @@ -1051,18 +1143,18 @@ static int qcom_llcc_probe(struct platform_device *pdev)
> }
>
> static const struct of_device_id qcom_llcc_of_match[] = {
> - { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfg },
> - { .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfg },
> - { .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfg },
> - { .compatible = "qcom,sc8280xp-llcc", .data = &sc8280xp_cfg },
> - { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfg },
> - { .compatible = "qcom,sm6350-llcc", .data = &sm6350_cfg },
> - { .compatible = "qcom,sm7150-llcc", .data = &sm7150_cfg },
> - { .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfg },
> - { .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfg },
> - { .compatible = "qcom,sm8350-llcc", .data = &sm8350_cfg },
> - { .compatible = "qcom,sm8450-llcc", .data = &sm8450_cfg },
> - { .compatible = "qcom,sm8550-llcc", .data = &sm8550_cfg },
> + { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfgs },
> + { .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfgs },
> + { .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfgs },
> + { .compatible = "qcom,sc8280xp-llcc", .data = &sc8280xp_cfgs },
> + { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfgs },
> + { .compatible = "qcom,sm6350-llcc", .data = &sm6350_cfgs },
> + { .compatible = "qcom,sm7150-llcc", .data = &sm7150_cfgs },
> + { .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfgs },
> + { .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfgs },
> + { .compatible = "qcom,sm8350-llcc", .data = &sm8350_cfgs },
> + { .compatible = "qcom,sm8450-llcc", .data = &sm8450_cfgs },
> + { .compatible = "qcom,sm8550-llcc", .data = &sm8550_cfgs },
> { }
> };
> MODULE_DEVICE_TABLE(of, qcom_llcc_of_match);
On 24/07/2023 14:28, Mukesh Ojha wrote:
> On 7/24/2023 2:11 PM, Komal Bajaj wrote:
>> Refactor driver to support multiple configuration for llcc on a target.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>> drivers/soc/qcom/llcc-qcom.c | 264 +++++++++++++++++++++++------------
>> 1 file changed, 178 insertions(+), 86 deletions(-)
>>
>> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
>> index 67c19ed2219a..321f8d2079f7 100644
>> --- a/drivers/soc/qcom/llcc-qcom.c
>> +++ b/drivers/soc/qcom/llcc-qcom.c
>> @@ -127,6 +127,12 @@ struct qcom_llcc_config {
>> bool no_edac;
>> };
>>
>> +struct qcom_sct_config
>
> const ?
What (and how) should be const above?
Best regards,
Krzysztof
On 7/24/2023 5:58 PM, Mukesh Ojha wrote:
>
>
> On 7/24/2023 2:11 PM, Komal Bajaj wrote:
>> Refactor driver to support multiple configuration for llcc on a target.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>> drivers/soc/qcom/llcc-qcom.c | 264 +++++++++++++++++++++++------------
>> 1 file changed, 178 insertions(+), 86 deletions(-)
>>
>> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
>> index 67c19ed2219a..321f8d2079f7 100644
>> --- a/drivers/soc/qcom/llcc-qcom.c
>> +++ b/drivers/soc/qcom/llcc-qcom.c
>> @@ -127,6 +127,12 @@ struct qcom_llcc_config {
>> bool no_edac;
>> };
>> +struct qcom_sct_config
>
> const ?
Please ignore this comment, it looks like, I wrote something and forgot
to remove..
-Mukesh
> > + const struct qcom_llcc_config *llcc_config;
>> + int num_cfgs;
>> +};
>> +
>> +
>> enum llcc_reg_offset {
>> LLCC_COMMON_HW_INFO,
>> LLCC_COMMON_STATUS0,
>> @@ -423,101 +429,185 @@ static const u32 llcc_v2_1_reg_offset[] = {
>> [LLCC_COMMON_STATUS0] = 0x0003400c,
>> };
>> -static const struct qcom_llcc_config sc7180_cfg = {
>> - .sct_data = sc7180_data,
>> - .size = ARRAY_SIZE(sc7180_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> +static const struct qcom_llcc_config sc7180_cfg[] = {
>> + {
>> + .sct_data = sc7180_data,
>> + .size = ARRAY_SIZE(sc7180_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sc7280_cfg[] = {
>> + {
>> + .sct_data = sc7280_data,
>> + .size = ARRAY_SIZE(sc7280_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sc8180x_cfg[] = {
>> + {
>> + .sct_data = sc8180x_data,
>> + .size = ARRAY_SIZE(sc8180x_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sc8280xp_cfg[] = {
>> + {
>> + .sct_data = sc8280xp_data,
>> + .size = ARRAY_SIZE(sc8280xp_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sdm845_cfg[] = {
>> + {
>> + .sct_data = sdm845_data,
>> + .size = ARRAY_SIZE(sdm845_data),
>> + .need_llcc_cfg = false,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + .no_edac = true,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sm6350_cfg[] = {
>> + {
>> + .sct_data = sm6350_data,
>> + .size = ARRAY_SIZE(sm6350_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sm7150_cfg[] = {
>> + {
>> + .sct_data = sm7150_data,
>> + .size = ARRAY_SIZE(sm7150_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sm8150_cfg[] = {
>> + {
>> + .sct_data = sm8150_data,
>> + .size = ARRAY_SIZE(sm8150_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sm8250_cfg[] = {
>> + {
>> + .sct_data = sm8250_data,
>> + .size = ARRAY_SIZE(sm8250_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sm8350_cfg[] = {
>> + {
>> + .sct_data = sm8350_data,
>> + .size = ARRAY_SIZE(sm8350_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v1_reg_offset,
>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sm8450_cfg[] = {
>> + {
>> + .sct_data = sm8450_data,
>> + .size = ARRAY_SIZE(sm8450_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v2_1_reg_offset,
>> + .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_llcc_config sm8550_cfg[] = {
>> + {
>> + .sct_data = sm8550_data,
>> + .size = ARRAY_SIZE(sm8550_data),
>> + .need_llcc_cfg = true,
>> + .reg_offset = llcc_v2_1_reg_offset,
>> + .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>> + },
>> +};
>> +
>> +static const struct qcom_sct_config sc7180_cfgs = {
>> + .llcc_config = sc7180_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sc7280_cfg = {
>> - .sct_data = sc7280_data,
>> - .size = ARRAY_SIZE(sc7280_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> +static const struct qcom_sct_config sc7280_cfgs = {
>> + .llcc_config = sc7280_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sc8180x_cfg = {
>> - .sct_data = sc8180x_data,
>> - .size = ARRAY_SIZE(sc8180x_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> +static const struct qcom_sct_config sc8180x_cfgs = {
>> + .llcc_config = sc8180x_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sc8280xp_cfg = {
>> - .sct_data = sc8280xp_data,
>> - .size = ARRAY_SIZE(sc8280xp_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> +static const struct qcom_sct_config sc8280xp_cfgs = {
>> + .llcc_config = sc8280xp_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sdm845_cfg = {
>> - .sct_data = sdm845_data,
>> - .size = ARRAY_SIZE(sdm845_data),
>> - .need_llcc_cfg = false,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> - .no_edac = true,
>> +static const struct qcom_sct_config sdm845_cfgs = {
>> + .llcc_config = sdm845_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sm6350_cfg = {
>> - .sct_data = sm6350_data,
>> - .size = ARRAY_SIZE(sm6350_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> +static const struct qcom_sct_config sm6350_cfgs = {
>> + .llcc_config = sm6350_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sm7150_cfg = {
>> - .sct_data = sm7150_data,
>> - .size = ARRAY_SIZE(sm7150_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> +static const struct qcom_sct_config sm7150_cfgs = {
>> + .llcc_config = sm7150_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sm8150_cfg = {
>> - .sct_data = sm8150_data,
>> - .size = ARRAY_SIZE(sm8150_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> +static const struct qcom_sct_config sm8150_cfgs = {
>> + .llcc_config = sm8150_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sm8250_cfg = {
>> - .sct_data = sm8250_data,
>> - .size = ARRAY_SIZE(sm8250_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> +static const struct qcom_sct_config sm8250_cfgs = {
>> + .llcc_config = sm8250_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sm8350_cfg = {
>> - .sct_data = sm8350_data,
>> - .size = ARRAY_SIZE(sm8350_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v1_reg_offset,
>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>> +static const struct qcom_sct_config sm8350_cfgs = {
>> + .llcc_config = sm8350_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sm8450_cfg = {
>> - .sct_data = sm8450_data,
>> - .size = ARRAY_SIZE(sm8450_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v2_1_reg_offset,
>> - .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>> +static const struct qcom_sct_config sm8450_cfgs = {
>> + .llcc_config = sm8450_cfg,
>> + .num_cfgs = 1,
>> };
>> -static const struct qcom_llcc_config sm8550_cfg = {
>> - .sct_data = sm8550_data,
>> - .size = ARRAY_SIZE(sm8550_data),
>> - .need_llcc_cfg = true,
>> - .reg_offset = llcc_v2_1_reg_offset,
>> - .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>> +static const struct qcom_sct_config sm8550_cfgs = {
>> + .llcc_config = sm8550_cfg,
>> + .num_cfgs = 1,
>
> num prefix itself take care of singular/plural, num_config would do
> good.
>
>
>> };
>> static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
>> @@ -939,6 +1029,7 @@ static int qcom_llcc_probe(struct platform_device
>> *pdev)
>> struct device *dev = &pdev->dev;
>> int ret, i;
>> struct platform_device *llcc_edac;
>> + const struct qcom_sct_config *cfgs;
>> const struct qcom_llcc_config *cfg;
>> const struct llcc_slice_config *llcc_cfg;
>> u32 sz;
>> @@ -958,7 +1049,8 @@ static int qcom_llcc_probe(struct platform_device
>> *pdev)
>> goto err;
>> }
>> - cfg = of_device_get_match_data(&pdev->dev);
>> + cfgs = of_device_get_match_data(&pdev->dev);
>> + cfg = &cfgs->llcc_config[0];
>
> Hardcoding without check ?
>
> #define DEFAULT_NUM_CFG 1
>
> if (cfgs->num_cfgs != DEFAULT_NUM_CFG)
> ret = -EINVAL;
> goto err;
>
> cfg = &cfgs->llcc_config[DEFAULT_NUM_CFG - 1];
>
> I would let others comment as well..
>
>
> -Mukesh
>
>> ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0],
>> &num_banks);
>> if (ret)
>> @@ -1051,18 +1143,18 @@ static int qcom_llcc_probe(struct
>> platform_device *pdev)
>> }
>> static const struct of_device_id qcom_llcc_of_match[] = {
>> - { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfg },
>> - { .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfg },
>> - { .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfg },
>> - { .compatible = "qcom,sc8280xp-llcc", .data = &sc8280xp_cfg },
>> - { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfg },
>> - { .compatible = "qcom,sm6350-llcc", .data = &sm6350_cfg },
>> - { .compatible = "qcom,sm7150-llcc", .data = &sm7150_cfg },
>> - { .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfg },
>> - { .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfg },
>> - { .compatible = "qcom,sm8350-llcc", .data = &sm8350_cfg },
>> - { .compatible = "qcom,sm8450-llcc", .data = &sm8450_cfg },
>> - { .compatible = "qcom,sm8550-llcc", .data = &sm8550_cfg },
>> + { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfgs },
>> + { .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfgs },
>> + { .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfgs },
>> + { .compatible = "qcom,sc8280xp-llcc", .data = &sc8280xp_cfgs },
>> + { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfgs },
>> + { .compatible = "qcom,sm6350-llcc", .data = &sm6350_cfgs },
>> + { .compatible = "qcom,sm7150-llcc", .data = &sm7150_cfgs },
>> + { .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfgs },
>> + { .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfgs },
>> + { .compatible = "qcom,sm8350-llcc", .data = &sm8350_cfgs },
>> + { .compatible = "qcom,sm8450-llcc", .data = &sm8450_cfgs },
>> + { .compatible = "qcom,sm8550-llcc", .data = &sm8550_cfgs },
>> { }
>> };
>> MODULE_DEVICE_TABLE(of, qcom_llcc_of_match);
On 7/24/2023 6:56 PM, Krzysztof Kozlowski wrote:
> On 24/07/2023 14:28, Mukesh Ojha wrote:
>> On 7/24/2023 2:11 PM, Komal Bajaj wrote:
>>> Refactor driver to support multiple configuration for llcc on a target.
>>>
>>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>>> ---
>>> drivers/soc/qcom/llcc-qcom.c | 264 +++++++++++++++++++++++------------
>>> 1 file changed, 178 insertions(+), 86 deletions(-)
>>>
>>> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
>>> index 67c19ed2219a..321f8d2079f7 100644
>>> --- a/drivers/soc/qcom/llcc-qcom.c
>>> +++ b/drivers/soc/qcom/llcc-qcom.c
>>> @@ -127,6 +127,12 @@ struct qcom_llcc_config {
>>> bool no_edac;
>>> };
>>>
>>> +struct qcom_sct_config
>>
>> const ?
>
> What (and how) should be const above?
left over, thanks for catching..
-Mukesh
>
> Best regards,
> Krzysztof
>
On 7/24/2023 9:41 PM, Mukesh Ojha wrote:
>
>
> On 7/24/2023 5:58 PM, Mukesh Ojha wrote:
>>
>>
>> On 7/24/2023 2:11 PM, Komal Bajaj wrote:
>>> Refactor driver to support multiple configuration for llcc on a target.
>>>
>>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>>> ---
>>> drivers/soc/qcom/llcc-qcom.c | 264
>>> +++++++++++++++++++++++------------
>>> 1 file changed, 178 insertions(+), 86 deletions(-)
>>>
>>> diff --git a/drivers/soc/qcom/llcc-qcom.c
>>> b/drivers/soc/qcom/llcc-qcom.c
>>> index 67c19ed2219a..321f8d2079f7 100644
>>> --- a/drivers/soc/qcom/llcc-qcom.c
>>> +++ b/drivers/soc/qcom/llcc-qcom.c
>>> @@ -127,6 +127,12 @@ struct qcom_llcc_config {
>>> bool no_edac;
>>> };
>>> +struct qcom_sct_config
>>
>> const ?
>
> Please ignore this comment, it looks like, I wrote something and forgot
> to remove..
>
>
> -Mukesh
>
>> > + const struct qcom_llcc_config *llcc_config;
>>> + int num_cfgs;
>>> +};
>>> +
>>> +
>>> enum llcc_reg_offset {
>>> LLCC_COMMON_HW_INFO,
>>> LLCC_COMMON_STATUS0,
>>> @@ -423,101 +429,185 @@ static const u32 llcc_v2_1_reg_offset[] = {
>>> [LLCC_COMMON_STATUS0] = 0x0003400c,
>>> };
>>> -static const struct qcom_llcc_config sc7180_cfg = {
>>> - .sct_data = sc7180_data,
>>> - .size = ARRAY_SIZE(sc7180_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> +static const struct qcom_llcc_config sc7180_cfg[] = {
>>> + {
>>> + .sct_data = sc7180_data,
>>> + .size = ARRAY_SIZE(sc7180_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sc7280_cfg[] = {
>>> + {
>>> + .sct_data = sc7280_data,
>>> + .size = ARRAY_SIZE(sc7280_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sc8180x_cfg[] = {
>>> + {
>>> + .sct_data = sc8180x_data,
>>> + .size = ARRAY_SIZE(sc8180x_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sc8280xp_cfg[] = {
>>> + {
>>> + .sct_data = sc8280xp_data,
>>> + .size = ARRAY_SIZE(sc8280xp_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sdm845_cfg[] = {
>>> + {
>>> + .sct_data = sdm845_data,
>>> + .size = ARRAY_SIZE(sdm845_data),
>>> + .need_llcc_cfg = false,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + .no_edac = true,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sm6350_cfg[] = {
>>> + {
>>> + .sct_data = sm6350_data,
>>> + .size = ARRAY_SIZE(sm6350_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sm7150_cfg[] = {
>>> + {
>>> + .sct_data = sm7150_data,
>>> + .size = ARRAY_SIZE(sm7150_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sm8150_cfg[] = {
>>> + {
>>> + .sct_data = sm8150_data,
>>> + .size = ARRAY_SIZE(sm8150_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sm8250_cfg[] = {
>>> + {
>>> + .sct_data = sm8250_data,
>>> + .size = ARRAY_SIZE(sm8250_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sm8350_cfg[] = {
>>> + {
>>> + .sct_data = sm8350_data,
>>> + .size = ARRAY_SIZE(sm8350_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v1_reg_offset,
>>> + .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sm8450_cfg[] = {
>>> + {
>>> + .sct_data = sm8450_data,
>>> + .size = ARRAY_SIZE(sm8450_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v2_1_reg_offset,
>>> + .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_llcc_config sm8550_cfg[] = {
>>> + {
>>> + .sct_data = sm8550_data,
>>> + .size = ARRAY_SIZE(sm8550_data),
>>> + .need_llcc_cfg = true,
>>> + .reg_offset = llcc_v2_1_reg_offset,
>>> + .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>>> + },
>>> +};
>>> +
>>> +static const struct qcom_sct_config sc7180_cfgs = {
>>> + .llcc_config = sc7180_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sc7280_cfg = {
>>> - .sct_data = sc7280_data,
>>> - .size = ARRAY_SIZE(sc7280_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> +static const struct qcom_sct_config sc7280_cfgs = {
>>> + .llcc_config = sc7280_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sc8180x_cfg = {
>>> - .sct_data = sc8180x_data,
>>> - .size = ARRAY_SIZE(sc8180x_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> +static const struct qcom_sct_config sc8180x_cfgs = {
>>> + .llcc_config = sc8180x_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sc8280xp_cfg = {
>>> - .sct_data = sc8280xp_data,
>>> - .size = ARRAY_SIZE(sc8280xp_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> +static const struct qcom_sct_config sc8280xp_cfgs = {
>>> + .llcc_config = sc8280xp_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sdm845_cfg = {
>>> - .sct_data = sdm845_data,
>>> - .size = ARRAY_SIZE(sdm845_data),
>>> - .need_llcc_cfg = false,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> - .no_edac = true,
>>> +static const struct qcom_sct_config sdm845_cfgs = {
>>> + .llcc_config = sdm845_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sm6350_cfg = {
>>> - .sct_data = sm6350_data,
>>> - .size = ARRAY_SIZE(sm6350_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> +static const struct qcom_sct_config sm6350_cfgs = {
>>> + .llcc_config = sm6350_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sm7150_cfg = {
>>> - .sct_data = sm7150_data,
>>> - .size = ARRAY_SIZE(sm7150_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> +static const struct qcom_sct_config sm7150_cfgs = {
>>> + .llcc_config = sm7150_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sm8150_cfg = {
>>> - .sct_data = sm8150_data,
>>> - .size = ARRAY_SIZE(sm8150_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> +static const struct qcom_sct_config sm8150_cfgs = {
>>> + .llcc_config = sm8150_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sm8250_cfg = {
>>> - .sct_data = sm8250_data,
>>> - .size = ARRAY_SIZE(sm8250_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> +static const struct qcom_sct_config sm8250_cfgs = {
>>> + .llcc_config = sm8250_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sm8350_cfg = {
>>> - .sct_data = sm8350_data,
>>> - .size = ARRAY_SIZE(sm8350_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v1_reg_offset,
>>> - .edac_reg_offset = &llcc_v1_edac_reg_offset,
>>> +static const struct qcom_sct_config sm8350_cfgs = {
>>> + .llcc_config = sm8350_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sm8450_cfg = {
>>> - .sct_data = sm8450_data,
>>> - .size = ARRAY_SIZE(sm8450_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v2_1_reg_offset,
>>> - .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>>> +static const struct qcom_sct_config sm8450_cfgs = {
>>> + .llcc_config = sm8450_cfg,
>>> + .num_cfgs = 1,
>>> };
>>> -static const struct qcom_llcc_config sm8550_cfg = {
>>> - .sct_data = sm8550_data,
>>> - .size = ARRAY_SIZE(sm8550_data),
>>> - .need_llcc_cfg = true,
>>> - .reg_offset = llcc_v2_1_reg_offset,
>>> - .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
>>> +static const struct qcom_sct_config sm8550_cfgs = {
>>> + .llcc_config = sm8550_cfg,
>>> + .num_cfgs = 1,
>>
>> num prefix itself take care of singular/plural, num_config would do
>> good.
>>
>>
>>> };
>>> static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
>>> @@ -939,6 +1029,7 @@ static int qcom_llcc_probe(struct
>>> platform_device *pdev)
>>> struct device *dev = &pdev->dev;
>>> int ret, i;
>>> struct platform_device *llcc_edac;
>>> + const struct qcom_sct_config *cfgs;
>>> const struct qcom_llcc_config *cfg;
>>> const struct llcc_slice_config *llcc_cfg;
>>> u32 sz;
>>> @@ -958,7 +1049,8 @@ static int qcom_llcc_probe(struct
>>> platform_device *pdev)
>>> goto err;
>>> }
>>> - cfg = of_device_get_match_data(&pdev->dev);
>>> + cfgs = of_device_get_match_data(&pdev->dev);
>>> + cfg = &cfgs->llcc_config[0];
>>
>> Hardcoding without check ?
>>
>> #define DEFAULT_NUM_CFG 1
>>
>> if (cfgs->num_cfgs != DEFAULT_NUM_CFG)
>> ret = -EINVAL;
>> goto err;
>>
>> cfg = &cfgs->llcc_config[DEFAULT_NUM_CFG - 1];
>>
>> I would let others comment as well..
Okay, will add a check for default llcc configuration.
Thanks
Komal
>>
>>
>> -Mukesh
>>
>>> ret = regmap_read(regmap,
>>> cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
>>> if (ret)
>>> @@ -1051,18 +1143,18 @@ static int qcom_llcc_probe(struct
>>> platform_device *pdev)
>>> }
>>> static const struct of_device_id qcom_llcc_of_match[] = {
>>> - { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfg },
>>> - { .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfg },
>>> - { .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfg },
>>> - { .compatible = "qcom,sc8280xp-llcc", .data = &sc8280xp_cfg },
>>> - { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfg },
>>> - { .compatible = "qcom,sm6350-llcc", .data = &sm6350_cfg },
>>> - { .compatible = "qcom,sm7150-llcc", .data = &sm7150_cfg },
>>> - { .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfg },
>>> - { .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfg },
>>> - { .compatible = "qcom,sm8350-llcc", .data = &sm8350_cfg },
>>> - { .compatible = "qcom,sm8450-llcc", .data = &sm8450_cfg },
>>> - { .compatible = "qcom,sm8550-llcc", .data = &sm8550_cfg },
>>> + { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfgs },
>>> + { .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfgs },
>>> + { .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfgs },
>>> + { .compatible = "qcom,sc8280xp-llcc", .data = &sc8280xp_cfgs },
>>> + { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfgs },
>>> + { .compatible = "qcom,sm6350-llcc", .data = &sm6350_cfgs },
>>> + { .compatible = "qcom,sm7150-llcc", .data = &sm7150_cfgs },
>>> + { .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfgs },
>>> + { .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfgs },
>>> + { .compatible = "qcom,sm8350-llcc", .data = &sm8350_cfgs },
>>> + { .compatible = "qcom,sm8450-llcc", .data = &sm8450_cfgs },
>>> + { .compatible = "qcom,sm8550-llcc", .data = &sm8550_cfgs },
>>> { }
>>> };
>>> MODULE_DEVICE_TABLE(of, qcom_llcc_of_match);
@@ -127,6 +127,12 @@ struct qcom_llcc_config {
bool no_edac;
};
+struct qcom_sct_config {
+ const struct qcom_llcc_config *llcc_config;
+ int num_cfgs;
+};
+
+
enum llcc_reg_offset {
LLCC_COMMON_HW_INFO,
LLCC_COMMON_STATUS0,
@@ -423,101 +429,185 @@ static const u32 llcc_v2_1_reg_offset[] = {
[LLCC_COMMON_STATUS0] = 0x0003400c,
};
-static const struct qcom_llcc_config sc7180_cfg = {
- .sct_data = sc7180_data,
- .size = ARRAY_SIZE(sc7180_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
+static const struct qcom_llcc_config sc7180_cfg[] = {
+ {
+ .sct_data = sc7180_data,
+ .size = ARRAY_SIZE(sc7180_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sc7280_cfg[] = {
+ {
+ .sct_data = sc7280_data,
+ .size = ARRAY_SIZE(sc7280_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sc8180x_cfg[] = {
+ {
+ .sct_data = sc8180x_data,
+ .size = ARRAY_SIZE(sc8180x_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sc8280xp_cfg[] = {
+ {
+ .sct_data = sc8280xp_data,
+ .size = ARRAY_SIZE(sc8280xp_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sdm845_cfg[] = {
+ {
+ .sct_data = sdm845_data,
+ .size = ARRAY_SIZE(sdm845_data),
+ .need_llcc_cfg = false,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ .no_edac = true,
+ },
+};
+
+static const struct qcom_llcc_config sm6350_cfg[] = {
+ {
+ .sct_data = sm6350_data,
+ .size = ARRAY_SIZE(sm6350_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sm7150_cfg[] = {
+ {
+ .sct_data = sm7150_data,
+ .size = ARRAY_SIZE(sm7150_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sm8150_cfg[] = {
+ {
+ .sct_data = sm8150_data,
+ .size = ARRAY_SIZE(sm8150_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sm8250_cfg[] = {
+ {
+ .sct_data = sm8250_data,
+ .size = ARRAY_SIZE(sm8250_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sm8350_cfg[] = {
+ {
+ .sct_data = sm8350_data,
+ .size = ARRAY_SIZE(sm8350_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v1_reg_offset,
+ .edac_reg_offset = &llcc_v1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sm8450_cfg[] = {
+ {
+ .sct_data = sm8450_data,
+ .size = ARRAY_SIZE(sm8450_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v2_1_reg_offset,
+ .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_llcc_config sm8550_cfg[] = {
+ {
+ .sct_data = sm8550_data,
+ .size = ARRAY_SIZE(sm8550_data),
+ .need_llcc_cfg = true,
+ .reg_offset = llcc_v2_1_reg_offset,
+ .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+ },
+};
+
+static const struct qcom_sct_config sc7180_cfgs = {
+ .llcc_config = sc7180_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sc7280_cfg = {
- .sct_data = sc7280_data,
- .size = ARRAY_SIZE(sc7280_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
+static const struct qcom_sct_config sc7280_cfgs = {
+ .llcc_config = sc7280_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sc8180x_cfg = {
- .sct_data = sc8180x_data,
- .size = ARRAY_SIZE(sc8180x_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
+static const struct qcom_sct_config sc8180x_cfgs = {
+ .llcc_config = sc8180x_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sc8280xp_cfg = {
- .sct_data = sc8280xp_data,
- .size = ARRAY_SIZE(sc8280xp_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
+static const struct qcom_sct_config sc8280xp_cfgs = {
+ .llcc_config = sc8280xp_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sdm845_cfg = {
- .sct_data = sdm845_data,
- .size = ARRAY_SIZE(sdm845_data),
- .need_llcc_cfg = false,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
- .no_edac = true,
+static const struct qcom_sct_config sdm845_cfgs = {
+ .llcc_config = sdm845_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sm6350_cfg = {
- .sct_data = sm6350_data,
- .size = ARRAY_SIZE(sm6350_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
+static const struct qcom_sct_config sm6350_cfgs = {
+ .llcc_config = sm6350_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sm7150_cfg = {
- .sct_data = sm7150_data,
- .size = ARRAY_SIZE(sm7150_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
+static const struct qcom_sct_config sm7150_cfgs = {
+ .llcc_config = sm7150_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sm8150_cfg = {
- .sct_data = sm8150_data,
- .size = ARRAY_SIZE(sm8150_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
+static const struct qcom_sct_config sm8150_cfgs = {
+ .llcc_config = sm8150_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sm8250_cfg = {
- .sct_data = sm8250_data,
- .size = ARRAY_SIZE(sm8250_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
+static const struct qcom_sct_config sm8250_cfgs = {
+ .llcc_config = sm8250_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sm8350_cfg = {
- .sct_data = sm8350_data,
- .size = ARRAY_SIZE(sm8350_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v1_reg_offset,
- .edac_reg_offset = &llcc_v1_edac_reg_offset,
+static const struct qcom_sct_config sm8350_cfgs = {
+ .llcc_config = sm8350_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sm8450_cfg = {
- .sct_data = sm8450_data,
- .size = ARRAY_SIZE(sm8450_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v2_1_reg_offset,
- .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+static const struct qcom_sct_config sm8450_cfgs = {
+ .llcc_config = sm8450_cfg,
+ .num_cfgs = 1,
};
-static const struct qcom_llcc_config sm8550_cfg = {
- .sct_data = sm8550_data,
- .size = ARRAY_SIZE(sm8550_data),
- .need_llcc_cfg = true,
- .reg_offset = llcc_v2_1_reg_offset,
- .edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+static const struct qcom_sct_config sm8550_cfgs = {
+ .llcc_config = sm8550_cfg,
+ .num_cfgs = 1,
};
static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
@@ -939,6 +1029,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
int ret, i;
struct platform_device *llcc_edac;
+ const struct qcom_sct_config *cfgs;
const struct qcom_llcc_config *cfg;
const struct llcc_slice_config *llcc_cfg;
u32 sz;
@@ -958,7 +1049,8 @@ static int qcom_llcc_probe(struct platform_device *pdev)
goto err;
}
- cfg = of_device_get_match_data(&pdev->dev);
+ cfgs = of_device_get_match_data(&pdev->dev);
+ cfg = &cfgs->llcc_config[0];
ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
if (ret)
@@ -1051,18 +1143,18 @@ static int qcom_llcc_probe(struct platform_device *pdev)
}
static const struct of_device_id qcom_llcc_of_match[] = {
- { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfg },
- { .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfg },
- { .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfg },
- { .compatible = "qcom,sc8280xp-llcc", .data = &sc8280xp_cfg },
- { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfg },
- { .compatible = "qcom,sm6350-llcc", .data = &sm6350_cfg },
- { .compatible = "qcom,sm7150-llcc", .data = &sm7150_cfg },
- { .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfg },
- { .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfg },
- { .compatible = "qcom,sm8350-llcc", .data = &sm8350_cfg },
- { .compatible = "qcom,sm8450-llcc", .data = &sm8450_cfg },
- { .compatible = "qcom,sm8550-llcc", .data = &sm8550_cfg },
+ { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfgs },
+ { .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfgs },
+ { .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfgs },
+ { .compatible = "qcom,sc8280xp-llcc", .data = &sc8280xp_cfgs },
+ { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfgs },
+ { .compatible = "qcom,sm6350-llcc", .data = &sm6350_cfgs },
+ { .compatible = "qcom,sm7150-llcc", .data = &sm7150_cfgs },
+ { .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfgs },
+ { .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfgs },
+ { .compatible = "qcom,sm8350-llcc", .data = &sm8350_cfgs },
+ { .compatible = "qcom,sm8450-llcc", .data = &sm8450_cfgs },
+ { .compatible = "qcom,sm8550-llcc", .data = &sm8550_cfgs },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_llcc_of_match);