[v3,8/8] selftests/mm: Run all tests from run_vmtests.sh
Commit Message
It is very unclear to me how one is supposed to run all the mm selftests
consistently and get clear results.
Most of the test programs are launched by both run_vmtests.sh and
run_kselftest.sh:
hugepage-mmap
hugepage-shm
map_hugetlb
hugepage-mremap
hugepage-vmemmap
hugetlb-madvise
map_fixed_noreplace
gup_test
gup_longterm
uffd-unit-tests
uffd-stress
compaction_test
on-fault-limit
map_populate
mlock-random-test
mlock2-tests
mrelease_test
mremap_test
thuge-gen
virtual_address_range
va_high_addr_switch
mremap_dontunmap
hmm-tests
madv_populate
memfd_secret
ksm_tests
ksm_functional_tests
soft-dirty
cow
However, of this set, when launched by run_vmtests.sh, some of the
programs are invoked multiple times with different arguments. When
invoked by run_kselftest.sh, they are invoked without arguments (and as
a consequence, some fail immediately).
Some test programs are only launched by run_vmtests.sh:
test_vmalloc.sh
And some test programs and only launched by run_kselftest.sh:
khugepaged
migration
mkdirty
transhuge-stress
split_huge_page_test
mdwe_test
write_to_hugetlbfs
Furthermore, run_vmtests.sh is invoked by run_kselftest.sh, so in this
case all the test programs invoked by both scripts are run twice!
Needless to say, this is a bit of a mess. In the absence of fully
understanding the history here, it looks to me like the best solution is
to launch ALL test programs from run_vmtests.sh, and ONLY invoke
run_vmtests.sh from run_kselftest.sh. This way, we get full control over
the parameters, each program is only invoked the intended number of
times, and regardless of which script is used, the same tests get run in
the same way.
The only drawback is that if using run_kselftest.sh, it's top-level tap
result reporting reports only a single test and it fails if any of the
contained tests fail. I don't see this as a big deal though since we
still see all the nested reporting from multiple layers. The other issue
with this is that all of run_vmtests.sh must execute within a single
kselftest timeout period, so let's increase that to something more
suitable.
In the Makefile, TEST_GEN_PROGS will compile and install the tests and
will add them to the list of tests that run_kselftest.sh will run.
TEST_GEN_FILES will compile and install the tests but will not add them
to the test list. So let's move all the programs from TEST_GEN_PROGS to
TEST_GEN_FILES so that they are built but not executed by
run_kselftest.sh. Note that run_vmtests.sh is added to TEST_PROGS, which
means it ends up in the test list. (the lack of "_GEN" means it won't be
compiled, but simply copied).
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
---
tools/testing/selftests/mm/Makefile | 79 ++++++++++++-----------
tools/testing/selftests/mm/run_vmtests.sh | 23 +++++++
tools/testing/selftests/mm/settings | 2 +-
3 files changed, 64 insertions(+), 40 deletions(-)
@@ -35,41 +35,41 @@ MAKEFLAGS += --no-builtin-rules
CFLAGS = -Wall -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES)
LDLIBS = -lrt -lpthread
-TEST_GEN_PROGS = cow
-TEST_GEN_PROGS += compaction_test
-TEST_GEN_PROGS += gup_longterm
-TEST_GEN_PROGS += gup_test
-TEST_GEN_PROGS += hmm-tests
-TEST_GEN_PROGS += hugetlb-madvise
-TEST_GEN_PROGS += hugepage-mmap
-TEST_GEN_PROGS += hugepage-mremap
-TEST_GEN_PROGS += hugepage-shm
-TEST_GEN_PROGS += hugepage-vmemmap
-TEST_GEN_PROGS += khugepaged
-TEST_GEN_PROGS += madv_populate
-TEST_GEN_PROGS += map_fixed_noreplace
-TEST_GEN_PROGS += map_hugetlb
-TEST_GEN_PROGS += map_populate
-TEST_GEN_PROGS += memfd_secret
-TEST_GEN_PROGS += migration
-TEST_GEN_PROGS += mkdirty
-TEST_GEN_PROGS += mlock-random-test
-TEST_GEN_PROGS += mlock2-tests
-TEST_GEN_PROGS += mrelease_test
-TEST_GEN_PROGS += mremap_dontunmap
-TEST_GEN_PROGS += mremap_test
-TEST_GEN_PROGS += on-fault-limit
-TEST_GEN_PROGS += thuge-gen
-TEST_GEN_PROGS += transhuge-stress
-TEST_GEN_PROGS += uffd-stress
-TEST_GEN_PROGS += uffd-unit-tests
-TEST_GEN_PROGS += split_huge_page_test
-TEST_GEN_PROGS += ksm_tests
-TEST_GEN_PROGS += ksm_functional_tests
-TEST_GEN_PROGS += mdwe_test
+TEST_GEN_FILES = cow
+TEST_GEN_FILES += compaction_test
+TEST_GEN_FILES += gup_longterm
+TEST_GEN_FILES += gup_test
+TEST_GEN_FILES += hmm-tests
+TEST_GEN_FILES += hugetlb-madvise
+TEST_GEN_FILES += hugepage-mmap
+TEST_GEN_FILES += hugepage-mremap
+TEST_GEN_FILES += hugepage-shm
+TEST_GEN_FILES += hugepage-vmemmap
+TEST_GEN_FILES += khugepaged
+TEST_GEN_FILES += madv_populate
+TEST_GEN_FILES += map_fixed_noreplace
+TEST_GEN_FILES += map_hugetlb
+TEST_GEN_FILES += map_populate
+TEST_GEN_FILES += memfd_secret
+TEST_GEN_FILES += migration
+TEST_GEN_FILES += mkdirty
+TEST_GEN_FILES += mlock-random-test
+TEST_GEN_FILES += mlock2-tests
+TEST_GEN_FILES += mrelease_test
+TEST_GEN_FILES += mremap_dontunmap
+TEST_GEN_FILES += mremap_test
+TEST_GEN_FILES += on-fault-limit
+TEST_GEN_FILES += thuge-gen
+TEST_GEN_FILES += transhuge-stress
+TEST_GEN_FILES += uffd-stress
+TEST_GEN_FILES += uffd-unit-tests
+TEST_GEN_FILES += split_huge_page_test
+TEST_GEN_FILES += ksm_tests
+TEST_GEN_FILES += ksm_functional_tests
+TEST_GEN_FILES += mdwe_test
ifneq ($(ARCH),arm64)
-TEST_GEN_PROGS += soft-dirty
+TEST_GEN_FILES += soft-dirty
endif
ifeq ($(ARCH),x86_64)
@@ -86,24 +86,24 @@ CFLAGS += -no-pie
endif
ifeq ($(CAN_BUILD_I386),1)
-TEST_GEN_PROGS += $(BINARIES_32)
+TEST_GEN_FILES += $(BINARIES_32)
endif
ifeq ($(CAN_BUILD_X86_64),1)
-TEST_GEN_PROGS += $(BINARIES_64)
+TEST_GEN_FILES += $(BINARIES_64)
endif
else
ifneq (,$(findstring $(ARCH),ppc64))
-TEST_GEN_PROGS += protection_keys
+TEST_GEN_FILES += protection_keys
endif
endif
ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sparc64 x86_64))
-TEST_GEN_PROGS += va_high_addr_switch
-TEST_GEN_PROGS += virtual_address_range
-TEST_GEN_PROGS += write_to_hugetlbfs
+TEST_GEN_FILES += va_high_addr_switch
+TEST_GEN_FILES += virtual_address_range
+TEST_GEN_FILES += write_to_hugetlbfs
endif
TEST_PROGS := run_vmtests.sh
@@ -115,6 +115,7 @@ TEST_FILES += va_high_addr_switch.sh
include ../lib.mk
$(TEST_GEN_PROGS): vm_util.c
+$(TEST_GEN_FILES): vm_util.c
$(OUTPUT)/uffd-stress: uffd-common.c
$(OUTPUT)/uffd-unit-tests: uffd-common.c
@@ -55,6 +55,17 @@ separated by spaces:
test soft dirty page bit semantics
- cow
test copy-on-write semantics
+- thp
+ test transparent huge pages
+- migration
+ invoke move_pages(2) to exercise the migration entry code
+ paths in the kernel
+- mkdirty
+ test handling of code that might set PTE/PMD dirty in
+ read-only VMAs
+- mdwe
+ test prctl(PR_SET_MDWE, ...)
+
example: ./run_vmtests.sh -t "hmm mmap ksm"
EOF
exit 0
@@ -298,6 +309,18 @@ fi
# COW tests
CATEGORY="cow" run_test ./cow
+CATEGORY="thp" run_test ./khugepaged
+
+CATEGORY="thp" run_test ./transhuge-stress -d 20
+
+CATEGORY="thp" run_test ./split_huge_page_test
+
+CATEGORY="migration" run_test ./migration
+
+CATEGORY="mkdirty" run_test ./mkdirty
+
+CATEGORY="mdwe" run_test ./mdwe_test
+
echo "SUMMARY: PASS=${count_pass} SKIP=${count_skip} FAIL=${count_fail}"
exit $exitcode
@@ -1 +1 @@
-timeout=90
+timeout=180