[V2,3/3] arm64: dts: Replace the IRQ number with the IRQID macro definition
Commit Message
Replacing IRQ numbers with IRQID macro definitions makes node properties
easier to understand and also makes GPIO interrupts easier to use.
Associated platforms:
- Amlogic Meson-G12A
- Amlogic Meson-G12B
- Amlogic Meson-SM1
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
---
V1 -> V2: Include header file changed to amlogic,meson-g12a-gpio-intc.h
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
.../boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +-
.../boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++--
.../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 2 +-
.../boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 12 ++++++------
.../boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 2 +-
13 files changed, 20 insertions(+), 19 deletions(-)
Comments
On 24/07/2023 08:01, Huqiang Qin wrote:
> Replacing IRQ numbers with IRQID macro definitions makes node properties
> easier to understand and also makes GPIO interrupts easier to use.
>
> Associated platforms:
> - Amlogic Meson-G12A
> - Amlogic Meson-G12B
> - Amlogic Meson-SM1
>
> Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
> ---
>
> V1 -> V2: Include header file changed to amlogic,meson-g12a-gpio-intc.h
>
> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
> .../boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +-
> .../boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++--
> .../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 2 +-
> .../boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 4 ++--
> arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 12 ++++++------
> .../boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 2 +-
> 13 files changed, 20 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> index 0c49655cc90c..d8b94a3167c3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> @@ -9,6 +9,7 @@
> #include <dt-bindings/clock/g12a-aoclkc.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
> #include <dt-bindings/thermal/thermal.h>
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> index b2bb94981838..c79f3e8d26b7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> @@ -344,7 +344,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> index 97e522921b06..428b35e1d79c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> @@ -201,7 +201,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> index 83709787eb91..c69b0f803916 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> @@ -327,7 +327,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> index 276e95b34022..eed2a23047ca 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> @@ -380,7 +380,7 @@ rk818: pmic@1c {
> compatible = "rockchip,rk818";
> reg = <0x1c>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
> + interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
> #clock-cells = <1>;
>
> vcc1-supply = <&vdd_sys>;
> @@ -519,7 +519,7 @@ rk817: pmic@20 {
> reg = <0x20>;
> interrupt-parent = <&gpio_intc>;
>
> - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
> + interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
>
> vcc1-supply = <&vdd_sys>;
> vcc2-supply = <&vdd_sys>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> index 24d0442dffb2..01aa970b2f8c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -185,7 +185,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
> index b40d2c1002c9..ac8b7178257e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
> @@ -269,7 +269,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
> index d1debccdc1c2..95e03bb02af2 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
> @@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
> index 17045ff81c69..62404743e62d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
> @@ -45,7 +45,7 @@ key {
> linux,code = <BTN_1>;
> gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
> };
> };
>
> @@ -217,7 +217,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
> index 0f6660e68e72..ebda1dd30fa6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
> @@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> index 2fce44939f45..86b90f44a4b3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> @@ -283,7 +283,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 9068a334ea57..4f07d6387bb1 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -53,7 +53,7 @@ key-1 {
> linux,code = <BTN_0>;
> gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>;
> };
>
> key-2 {
> @@ -61,7 +61,7 @@ key-2 {
> linux,code = <BTN_1>;
> gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>;
> };
>
> key-3 {
> @@ -69,7 +69,7 @@ key-3 {
> linux,code = <BTN_2>;
> gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>;
> };
>
> key-mic-mute {
> @@ -78,7 +78,7 @@ key-mic-mute {
> linux,input-type = <EV_SW>;
> gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>;
> };
>
> key-power {
> @@ -86,7 +86,7 @@ key-power {
> linux,code = <KEY_POWER>;
> gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
> };
> };
>
> @@ -583,7 +583,7 @@ &uart_A {
> bluetooth {
> compatible = "brcm,bcm43438-bt";
> interrupt-parent = <&gpio_intc>;
> - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "host-wakeup";
> shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> max-speed = <2000000>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> index 7e1a74046ba5..6ee406066ee0 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> @@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/g12a-aoclkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
#include <dt-bindings/thermal/thermal.h>
@@ -344,7 +344,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -201,7 +201,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -327,7 +327,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -380,7 +380,7 @@ rk818: pmic@1c {
compatible = "rockchip,rk818";
reg = <0x1c>;
interrupt-parent = <&gpio_intc>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
+ interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
#clock-cells = <1>;
vcc1-supply = <&vdd_sys>;
@@ -519,7 +519,7 @@ rk817: pmic@20 {
reg = <0x20>;
interrupt-parent = <&gpio_intc>;
- interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
+ interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
vcc1-supply = <&vdd_sys>;
vcc2-supply = <&vdd_sys>;
@@ -185,7 +185,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -269,7 +269,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -45,7 +45,7 @@ key {
linux,code = <BTN_1>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
};
};
@@ -217,7 +217,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -283,7 +283,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -53,7 +53,7 @@ key-1 {
linux,code = <BTN_0>;
gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>;
};
key-2 {
@@ -61,7 +61,7 @@ key-2 {
linux,code = <BTN_1>;
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>;
};
key-3 {
@@ -69,7 +69,7 @@ key-3 {
linux,code = <BTN_2>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>;
};
key-mic-mute {
@@ -78,7 +78,7 @@ key-mic-mute {
linux,input-type = <EV_SW>;
gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>;
};
key-power {
@@ -86,7 +86,7 @@ key-power {
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
};
};
@@ -583,7 +583,7 @@ &uart_A {
bluetooth {
compatible = "brcm,bcm43438-bt";
interrupt-parent = <&gpio_intc>;
- interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wakeup";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
@@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};