[1/2] interconnect: qcom: qcm2290: Enable keep_alive on all buses

Message ID 20230720-topic-qcm2290_icc-v1-1-7f67f2e259c1@linaro.org
State New
Headers
Series QCM2290 icc fixes |

Commit Message

Konrad Dybcio July 20, 2023, 6:24 p.m. UTC
  QCM2290 expects all buses to be up at all times when the CPU is
active. Enable keep_alive on all of them to achieve that.

Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/qcm2290.c | 6 ++++++
 1 file changed, 6 insertions(+)
  

Patch

diff --git a/drivers/interconnect/qcom/qcm2290.c b/drivers/interconnect/qcom/qcm2290.c
index 3c3b24264a5b..c22354f3e667 100644
--- a/drivers/interconnect/qcom/qcm2290.c
+++ b/drivers/interconnect/qcom/qcm2290.c
@@ -1196,6 +1196,7 @@  static const struct qcom_icc_desc qcm2290_bimc = {
 	.num_nodes = ARRAY_SIZE(qcm2290_bimc_nodes),
 	.bus_clk_desc = &bimc_clk,
 	.regmap_cfg = &qcm2290_bimc_regmap_config,
+	.keep_alive = true,
 	/* M_REG_BASE() in vendor msm_bus_bimc_adhoc driver */
 	.qos_offset = 0x8000,
 };
@@ -1252,6 +1253,7 @@  static const struct qcom_icc_desc qcm2290_cnoc = {
 	.num_nodes = ARRAY_SIZE(qcm2290_cnoc_nodes),
 	.bus_clk_desc = &bus_1_clk,
 	.regmap_cfg = &qcm2290_cnoc_regmap_config,
+	.keep_alive = true,
 };
 
 static struct qcom_icc_node * const qcm2290_snoc_nodes[] = {
@@ -1294,6 +1296,7 @@  static const struct qcom_icc_desc qcm2290_snoc = {
 	.num_nodes = ARRAY_SIZE(qcm2290_snoc_nodes),
 	.bus_clk_desc = &bus_2_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
+	.keep_alive = true,
 	/* Vendor DT node fab-sys_noc property 'qcom,base-offset' */
 	.qos_offset = 0x15000,
 };
@@ -1308,6 +1311,7 @@  static const struct qcom_icc_desc qcm2290_qup_virt = {
 	.nodes = qcm2290_qup_virt_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_qup_virt_nodes),
 	.bus_clk_desc = &qup_clk,
+	.keep_alive = true,
 };
 
 static struct qcom_icc_node * const qcm2290_mmnrt_virt_nodes[] = {
@@ -1323,6 +1327,7 @@  static const struct qcom_icc_desc qcm2290_mmnrt_virt = {
 	.num_nodes = ARRAY_SIZE(qcm2290_mmnrt_virt_nodes),
 	.bus_clk_desc = &mmaxi_0_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
+	.keep_alive = true,
 	.qos_offset = 0x15000,
 };
 
@@ -1338,6 +1343,7 @@  static const struct qcom_icc_desc qcm2290_mmrt_virt = {
 	.num_nodes = ARRAY_SIZE(qcm2290_mmrt_virt_nodes),
 	.bus_clk_desc = &mmaxi_1_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
+	.keep_alive = true,
 	.qos_offset = 0x15000,
 };