[v2,1/4] spi: rzv2m-csi: Squash timing settings into one statement
Commit Message
Register CLKSEL hosts the configuration for both clock polarity
and data phase, and both values can be set in one write operation.
Squash the clock polarity and data phase register writes into
one statement, for efficiency.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
v2: No change.
drivers/spi/spi-rzv2m-csi.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
@@ -38,6 +38,7 @@
/* CSI_CLKSEL */
#define CSI_CLKSEL_CKP BIT(17)
#define CSI_CLKSEL_DAP BIT(16)
+#define CSI_CLKSEL_MODE (CSI_CLKSEL_CKP|CSI_CLKSEL_DAP)
#define CSI_CLKSEL_SLAVE BIT(15)
#define CSI_CLKSEL_CKS GENMASK(14, 1)
@@ -408,10 +409,8 @@ static int rzv2m_csi_setup(struct spi_device *spi)
writel(CSI_MODE_SETUP, csi->base + CSI_MODE);
/* Setup clock polarity and phase timing */
- rzv2m_csi_reg_write_bit(csi, CSI_CLKSEL, CSI_CLKSEL_CKP,
- !(spi->mode & SPI_CPOL));
- rzv2m_csi_reg_write_bit(csi, CSI_CLKSEL, CSI_CLKSEL_DAP,
- !(spi->mode & SPI_CPHA));
+ rzv2m_csi_reg_write_bit(csi, CSI_CLKSEL, CSI_CLKSEL_MODE,
+ ~spi->mode & SPI_MODE_X_MASK);
/* Setup serial data order */
rzv2m_csi_reg_write_bit(csi, CSI_MODE, CSI_MODE_DIR,