[v3,2/3] drm/panel: sitronix-st7789v: add panel orientation support

Message ID 20230718-feature-st7789v-v3-2-157d68fb63e2@wolfvision.net
State New
Headers
Series drm/panel: sitronix-st7789v: add panel orientation support |

Commit Message

Michael Riesch Aug. 4, 2023, 11:23 a.m. UTC
  Determine the orientation of the display based on the device tree and
propagate it.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
 drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
  

Patch

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index bc8df51224de..0ded72ed2fcd 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -126,6 +126,7 @@  struct st7789v {
 	struct spi_device *spi;
 	struct gpio_desc *reset;
 	struct regulator *power;
+	enum drm_panel_orientation orientation;
 };
 
 enum st7789v_prefix {
@@ -325,9 +326,22 @@  static int st7789v_get_modes(struct drm_panel *panel,
 	drm_display_info_set_bus_formats(&connector->display_info,
 					 &ctx->info->bus_format, 1);
 
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
+	drm_connector_set_panel_orientation(connector, ctx->orientation);
+
 	return 1;
 }
 
+static enum drm_panel_orientation st7789v_get_orientation(struct drm_panel *p)
+{
+	struct st7789v *ctx = panel_to_st7789v(p);
+
+	return ctx->orientation;
+}
+
 static int st7789v_prepare(struct drm_panel *panel)
 {
 	struct st7789v *ctx = panel_to_st7789v(panel);
@@ -522,6 +536,7 @@  static const struct drm_panel_funcs st7789v_drm_funcs = {
 	.disable = st7789v_disable,
 	.enable	= st7789v_enable,
 	.get_modes = st7789v_get_modes,
+	.get_orientation = st7789v_get_orientation,
 	.prepare = st7789v_prepare,
 	.unprepare = st7789v_unprepare,
 };
@@ -563,6 +578,8 @@  static int st7789v_probe(struct spi_device *spi)
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to get backlight\n");
 
+	of_drm_get_panel_orientation(spi->dev.of_node, &ctx->orientation);
+
 	drm_panel_add(&ctx->panel);
 
 	return 0;