[7/8] Input: qt2160 - convert to use devm_* api
Commit Message
Use devm_* api to simplify code, this makes it unnecessary to explicitly
release resources.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
---
drivers/input/keyboard/qt2160.c | 30 +++++++++++-------------------
1 file changed, 11 insertions(+), 19 deletions(-)
Comments
Hi Yangtao,
On Fri, Jul 14, 2023 at 04:06:10PM +0800, Yangtao Li wrote:
> Use devm_* api to simplify code, this makes it unnecessary to explicitly
> release resources.
>
> Signed-off-by: Yangtao Li <frank.li@vivo.com>
> ---
> drivers/input/keyboard/qt2160.c | 30 +++++++++++-------------------
> 1 file changed, 11 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
> index 599ea85cfd30..218ef92b8c2b 100644
> --- a/drivers/input/keyboard/qt2160.c
> +++ b/drivers/input/keyboard/qt2160.c
> @@ -340,6 +340,7 @@ static bool qt2160_identify(struct i2c_client *client)
>
> static int qt2160_probe(struct i2c_client *client)
> {
> + struct device *dev = &client->dev;
You create a temporary, but half of the code does not use it. Please if
you introduce a temporary make sure everything is using it.
> struct qt2160_data *qt2160;
> struct input_dev *input;
> int i;
> @@ -358,12 +359,11 @@ static int qt2160_probe(struct i2c_client *client)
> return -ENODEV;
>
> /* Chip is valid and active. Allocate structure */
> - qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
> - input = input_allocate_device();
> + qt2160 = devm_kzalloc(dev, sizeof(struct qt2160_data), GFP_KERNEL);
> + input = devm_input_allocate_device(dev);
> if (!qt2160 || !input) {
This double check was a cheat when resources did not free automatically,
it makes no sense to carry with devm.
> dev_err(&client->dev, "insufficient memory\n");
> - error = -ENOMEM;
> - goto err_free_mem;
> + return -ENOMEM;
> }
>
> qt2160->client = client;
> @@ -389,23 +389,23 @@ static int qt2160_probe(struct i2c_client *client)
> error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
> if (error) {
> dev_err(&client->dev, "failed to calibrate device\n");
> - goto err_free_mem;
> + return error;
> }
>
> if (client->irq) {
> - error = request_irq(client->irq, qt2160_irq,
> - IRQF_TRIGGER_FALLING, "qt2160", qt2160);
> + error = devm_request_irq(dev, client->irq, qt2160_irq,
> + IRQF_TRIGGER_FALLING, "qt2160", qt2160);
> if (error) {
> dev_err(&client->dev,
> "failed to allocate irq %d\n", client->irq);
> - goto err_free_mem;
> + return error;
> }
> }
>
> error = qt2160_register_leds(qt2160);
> if (error) {
> dev_err(&client->dev, "Failed to register leds\n");
> - goto err_free_irq;
> + return error;
> }
>
> error = input_register_device(qt2160->input);
> @@ -422,29 +422,21 @@ static int qt2160_probe(struct i2c_client *client)
>
> err_unregister_leds:
> qt2160_unregister_leds(qt2160);
LEDs can also be registered with devm.
> -err_free_irq:
> - if (client->irq)
> - free_irq(client->irq, qt2160);
> -err_free_mem:
> - input_free_device(input);
> - kfree(qt2160);
> return error;
> }
>
> static void qt2160_remove(struct i2c_client *client)
> {
> struct qt2160_data *qt2160 = i2c_get_clientdata(client);
> + struct device *dev = &client->dev;
>
> qt2160_unregister_leds(qt2160);
>
> /* Release IRQ so no queue will be scheduled */
> if (client->irq)
> - free_irq(client->irq, qt2160);
> + devm_free_irq(dev, client->irq, qt2160);
>
> cancel_delayed_work_sync(&qt2160->dwork);
It is not great that we are left with non-empty qt2160_remove(). The
driver should be converted away from using work item, and then entirety
of qt2160_remove() can be deleted.
I posted a series that cleans up the driver and incorporates an updated
version of your patch.
Thanks.
@@ -340,6 +340,7 @@ static bool qt2160_identify(struct i2c_client *client)
static int qt2160_probe(struct i2c_client *client)
{
+ struct device *dev = &client->dev;
struct qt2160_data *qt2160;
struct input_dev *input;
int i;
@@ -358,12 +359,11 @@ static int qt2160_probe(struct i2c_client *client)
return -ENODEV;
/* Chip is valid and active. Allocate structure */
- qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
- input = input_allocate_device();
+ qt2160 = devm_kzalloc(dev, sizeof(struct qt2160_data), GFP_KERNEL);
+ input = devm_input_allocate_device(dev);
if (!qt2160 || !input) {
dev_err(&client->dev, "insufficient memory\n");
- error = -ENOMEM;
- goto err_free_mem;
+ return -ENOMEM;
}
qt2160->client = client;
@@ -389,23 +389,23 @@ static int qt2160_probe(struct i2c_client *client)
error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
if (error) {
dev_err(&client->dev, "failed to calibrate device\n");
- goto err_free_mem;
+ return error;
}
if (client->irq) {
- error = request_irq(client->irq, qt2160_irq,
- IRQF_TRIGGER_FALLING, "qt2160", qt2160);
+ error = devm_request_irq(dev, client->irq, qt2160_irq,
+ IRQF_TRIGGER_FALLING, "qt2160", qt2160);
if (error) {
dev_err(&client->dev,
"failed to allocate irq %d\n", client->irq);
- goto err_free_mem;
+ return error;
}
}
error = qt2160_register_leds(qt2160);
if (error) {
dev_err(&client->dev, "Failed to register leds\n");
- goto err_free_irq;
+ return error;
}
error = input_register_device(qt2160->input);
@@ -422,29 +422,21 @@ static int qt2160_probe(struct i2c_client *client)
err_unregister_leds:
qt2160_unregister_leds(qt2160);
-err_free_irq:
- if (client->irq)
- free_irq(client->irq, qt2160);
-err_free_mem:
- input_free_device(input);
- kfree(qt2160);
return error;
}
static void qt2160_remove(struct i2c_client *client)
{
struct qt2160_data *qt2160 = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
qt2160_unregister_leds(qt2160);
/* Release IRQ so no queue will be scheduled */
if (client->irq)
- free_irq(client->irq, qt2160);
+ devm_free_irq(dev, client->irq, qt2160);
cancel_delayed_work_sync(&qt2160->dwork);
-
- input_unregister_device(qt2160->input);
- kfree(qt2160);
}
static const struct i2c_device_id qt2160_idtable[] = {