[v7,7/8] soc: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
Commit Message
From: Alexandre Bailon <abailon@baylibre.com>
This adds support for MTK_SCPD_STRICT_BUS_PROTECTION capability. It is a
strict bus protection policy that requires the bus protection to be
disabled before accessing the bus.
This is required by the mt8365, for the MM power domain.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
---
drivers/soc/mediatek/mtk-pm-domains.c | 27 +++++++++++++++++++++++----
drivers/soc/mediatek/mtk-pm-domains.h | 3 ++-
2 files changed, 25 insertions(+), 5 deletions(-)
@@ -262,9 +262,17 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
- ret = clk_bulk_prepare_enable(pd->num_subsys_clks, pd->subsys_clks);
- if (ret)
- goto err_pwr_ack;
+ /*
+ * In few Mediatek platforms(e.g. MT6779), the bus protect policy is
+ * stricter, which leads to bus protect release must be prior to bus
+ * access.
+ */
+ if (!MTK_SCPD_CAPS(pd, MTK_SCPD_STRICT_BUS_PROTECTION)) {
+ ret = clk_bulk_prepare_enable(pd->num_subsys_clks,
+ pd->subsys_clks);
+ if (ret)
+ goto err_pwr_ack;
+ }
ret = scpsys_sram_enable(pd);
if (ret < 0)
@@ -274,12 +282,23 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
if (ret < 0)
goto err_disable_sram;
+ if (MTK_SCPD_CAPS(pd, MTK_SCPD_STRICT_BUS_PROTECTION)) {
+ ret = clk_bulk_prepare_enable(pd->num_subsys_clks,
+ pd->subsys_clks);
+ if (ret)
+ goto err_enable_bus_protect;
+ }
+
return 0;
+err_enable_bus_protect:
+ scpsys_bus_protect_enable(pd);
err_disable_sram:
scpsys_sram_disable(pd);
err_disable_subsys_clks:
- clk_bulk_disable_unprepare(pd->num_subsys_clks, pd->subsys_clks);
+ if (!MTK_SCPD_CAPS(pd, MTK_SCPD_STRICT_BUS_PROTECTION))
+ clk_bulk_disable_unprepare(pd->num_subsys_clks,
+ pd->subsys_clks);
err_pwr_ack:
clk_bulk_disable_unprepare(pd->num_clks, pd->clks);
err_reg:
@@ -12,6 +12,7 @@
#define MTK_SCPD_ALWAYS_ON BIT(5)
#define MTK_SCPD_EXT_BUCK_ISO BIT(6)
#define MTK_SCPD_HAS_INFRA_NAO BIT(7)
+#define MTK_SCPD_STRICT_BUS_PROTECTION BIT(8)
#define MTK_SCPD_CAPS(_scpd, _x) ((_scpd)->data->caps & (_x))
#define SPM_VDE_PWR_CON 0x0210
@@ -107,7 +108,7 @@ struct scpsys_domain_data {
u32 sram_pdn_ack_bits;
int ext_buck_iso_offs;
u32 ext_buck_iso_mask;
- u8 caps;
+ u16 caps;
const struct scpsys_bus_prot_data bp_cfg[SPM_MAX_BUS_PROT_DATA];
int pwr_sta_offs;
int pwr_sta2nd_offs;