diff mbox series

[RESEND] dt-bindings: mfd: brcm: drop unneeded quotes and use absolute /schemas path

Message ID 20230713065040.7968-1-krzysztof.kozlowski@linaro.org
State New
Headers
Series [RESEND] dt-bindings: mfd: brcm: drop unneeded quotes and use absolute /schemas path |

Commit Message

Krzysztof Kozlowski July 13, 2023, 6:50 a.m. UTC 
  Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.  Also absolute path
starting with /schemas is preferred.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---

Rebase and resend. Dependencies were merged in v6.5-rc1.

 .../devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml     | 4 ++--
 .../devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml    | 4 ++--
 .../devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml     | 4 ++--
 .../devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml     | 4 ++--
 .../devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml     | 4 ++--
 .../devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml     | 4 ++--
 6 files changed, 12 insertions(+), 12 deletions(-)

Comments

Lee Jones July 13, 2023, 7:15 p.m. UTC | #1 
On Thu, 13 Jul 2023, Krzysztof Kozlowski wrote:

> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.  Also absolute path
> starting with /schemas is preferred.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> 
> Rebase and resend. Dependencies were merged in v6.5-rc1.
> 
>  .../devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml     | 4 ++--
>  .../devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml    | 4 ++--
>  .../devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml     | 4 ++--
>  .../devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml     | 4 ++--
>  .../devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml     | 4 ++--
>  .../devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml     | 4 ++--
>  6 files changed, 12 insertions(+), 12 deletions(-)

Applied, thanks
Lee Jones July 13, 2023, 7:18 p.m. UTC | #2 
On Thu, 13 Jul 2023 08:50:40 +0200, Krzysztof Kozlowski wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.  Also absolute path
> starting with /schemas is preferred.
> 
> 

Applied, thanks!

[1/1] dt-bindings: mfd: brcm: drop unneeded quotes and use absolute /schemas path
      commit: 113f9d8b863079e37c038092898c5deabc08f1cb

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
index 9f9a14af875e..cb480162f967 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
@@ -35,7 +35,7 @@  patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@  patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6318-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
index 803277dd2725..c14def1b2ad2 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
@@ -35,7 +35,7 @@  patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@  patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm63268-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
index b9a6856ce970..5f48209ed40f 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
@@ -35,7 +35,7 @@  patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@  patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6328-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
index 4651fe4dde07..f1f4629565d9 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
@@ -35,7 +35,7 @@  patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@  patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6358-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
index 0330b621fd38..4d594739b382 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
@@ -35,7 +35,7 @@  patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@  patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6362-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
index 82d3e4415bda..aae83d432880 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
@@ -35,7 +35,7 @@  patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
@@ -44,7 +44,7 @@  patternProperties:
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6368-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in