[v4,1/2] dt-bindings: mtd: Add SEAMA partition bindings
Commit Message
This types of NAND partitions appear in OpenWrt and
U-Boot.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v3->v4:
- Drop false flagged cells etc.
ChangeLog v2->v3:
- Drop reference from partitions.yaml again
- Drop select: false
- Use unevaluatedProperties
ChangeLog v1->v2:
- Fix up the binding to be childless
---
.../devicetree/bindings/mtd/partitions/seama.yaml | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
Comments
On Thu, 13 Jul 2023 00:16:41 +0200, Linus Walleij wrote:
> This types of NAND partitions appear in OpenWrt and
> U-Boot.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v3->v4:
> - Drop false flagged cells etc.
> ChangeLog v2->v3:
> - Drop reference from partitions.yaml again
> - Drop select: false
> - Use unevaluatedProperties
> ChangeLog v1->v2:
> - Fix up the binding to be childless
> ---
> .../devicetree/bindings/mtd/partitions/seama.yaml | 44 ++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
On Wed, 2023-07-12 at 22:16:41 UTC, Linus Walleij wrote:
> This types of NAND partitions appear in OpenWrt and
> U-Boot.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
Miquel
new file mode 100644
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/seama.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Seattle Image Partitions
+
+description: The SEAttle iMAge (SEAMA) partition is a type of partition
+ used for NAND flash devices. This type of flash image is found in some
+ D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L,
+ DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79
+ (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This partition type
+ does not have children defined in the device tree, they need to be
+ detected by software.
+
+allOf:
+ - $ref: partition.yaml#
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ compatible:
+ const: seama
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "seama";
+ reg = <0x0 0x800000>;
+ label = "firmware";
+ };
+ };