diff mbox series

[5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes

Message ID	20230710103735.1375847-6-quic_ipkumar@quicinc.com
State	New
Headers	Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; From: Praveenkumar I <quic_ipkumar@quicinc.com> To: <agross@kernel.org>, <andersson@kernel.org>, <konrad.dybcio@linaro.org>, <amitk@kernel.org>, <thara.gopinath@gmail.com>, <rafael@kernel.org>, <daniel.lezcano@linaro.org>, <rui.zhang@intel.com>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>, <linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> CC: <quic_varada@quicinc.com> Subject: [PATCH 5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes Date: Mon, 10 Jul 2023 16:07:34 +0530 Message-ID: <20230710103735.1375847-6-quic_ipkumar@quicinc.com> In-Reply-To: <20230710103735.1375847-1-quic_ipkumar@quicinc.com> References: <20230710103735.1375847-1-quic_ipkumar@quicinc.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain Precedence: bulk
Series	Add IPQ5332 TSENS support \| [0/6] Add IPQ5332 TSENS support [1/6] dt-bindings: thermal: tsens: Add nvmem cells for calibration data [2/6] thermal/drivers/tsens: Add TSENS enable and calibration support for V2 [3/6] dt-bindings: thermal: tsens: Add ipq5332 compatible [4/6] arm64: dts: qcom: ipq5332: Add tsens node [5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes [6/6] thermal/drivers/tsens: Add IPQ5332 support

Commit Message

Praveenkumar I July 10, 2023, 10:37 a.m. UTC

  This patch adds thermal zone nodes for sensors present in
IPQ5332.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

Comments

Dmitry Baryshkov July 10, 2023, 11:23 a.m. UTC | #1

On 10/07/2023 13:37, Praveenkumar I wrote:
> This patch adds thermal zone nodes for sensors present in
> IPQ5332.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
>   1 file changed, 72 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index a1e3527178c0..8b276aeca53e 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -527,4 +527,76 @@ timer {
>   			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>   			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>   	};
> +
> +	thermal-zones {
> +		rfa-0-thermal{
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 11>;
> +
> +			trips {
> +				rfa-0-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		rfa-1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 12>;
> +
> +			trips {
> +				rfa-1-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		misc-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 13>;
> +
> +			trips {
> +				misc-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 14>;
> +
> +			trips {
> +				cpu-top-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};

Could you please add a passive cooling devices for the CPU?

> +		};
> +
> +		top-glue-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 15>;
> +
> +			trips {
> +				top-glue-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
>   };

Konrad Dybcio July 10, 2023, 12:14 p.m. UTC | #2

On 10.07.2023 13:23, Dmitry Baryshkov wrote:
> On 10/07/2023 13:37, Praveenkumar I wrote:
>> This patch adds thermal zone nodes for sensors present in
>> IPQ5332.
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
>>   1 file changed, 72 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> index a1e3527178c0..8b276aeca53e 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -527,4 +527,76 @@ timer {
>>                    <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>                    <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>>       };
>> +
>> +    thermal-zones {
>> +        rfa-0-thermal{
thermal {


>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 11>;
>> +
>> +            trips {
Indentation seems off, tab size for kernel code is 8 spaces.

Konrad
>> +                rfa-0-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        rfa-1-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 12>;
>> +
>> +            trips {
>> +                rfa-1-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        misc-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 13>;
>> +
>> +            trips {
>> +                misc-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        cpu-top-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 14>;
>> +
>> +            trips {
>> +                cpu-top-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
> 
> Could you please add a passive cooling devices for the CPU?
> 
>> +        };
>> +
>> +        top-glue-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 15>;
>> +
>> +            trips {
>> +                top-glue-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +    };
>>   };
>

Praveenkumar I July 10, 2023, 1:30 p.m. UTC | #3

On 7/10/2023 4:53 PM, Dmitry Baryshkov wrote:
> On 10/07/2023 13:37, Praveenkumar I wrote:
>> This patch adds thermal zone nodes for sensors present in
>> IPQ5332.
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
>>   1 file changed, 72 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi 
>> b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> index a1e3527178c0..8b276aeca53e 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -527,4 +527,76 @@ timer {
>>                    <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>,
>>                    <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>;
>>       };
>> +
>> +    thermal-zones {
>> +        rfa-0-thermal{
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 11>;
>> +
>> +            trips {
>> +                rfa-0-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        rfa-1-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 12>;
>> +
>> +            trips {
>> +                rfa-1-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        misc-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 13>;
>> +
>> +            trips {
>> +                misc-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        cpu-top-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 14>;
>> +
>> +            trips {
>> +                cpu-top-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>
> Could you please add a passive cooling devices for the CPU?
Sure, will add the passive trip.
>
>> +        };
>> +
>> +        top-glue-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 15>;
>> +
>> +            trips {
>> +                top-glue-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +    };
>>   };
>
--
Thanks,
Praveenkumar

Praveenkumar I July 10, 2023, 1:34 p.m. UTC | #4

On 7/10/2023 5:44 PM, Konrad Dybcio wrote:
> On 10.07.2023 13:23, Dmitry Baryshkov wrote:
>> On 10/07/2023 13:37, Praveenkumar I wrote:
>>> This patch adds thermal zone nodes for sensors present in
>>> IPQ5332.
>>>
>>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
>>> ---
>>>    arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
>>>    1 file changed, 72 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>> index a1e3527178c0..8b276aeca53e 100644
>>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>> @@ -527,4 +527,76 @@ timer {
>>>                     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>>                     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>>>        };
>>> +
>>> +    thermal-zones {
>>> +        rfa-0-thermal{
> thermal {
In all other DTS, name is 'thermal-zones". Hence followed the same.
>
>>> +            polling-delay-passive = <0>;
>>> +            polling-delay = <0>;
>>> +            thermal-sensors = <&tsens 11>;
>>> +
>>> +            trips {
> Indentation seems off, tab size for kernel code is 8 spaces.
Sure, will check the indent and update in next patch.
>
> Konrad
>>> +                rfa-0-critical {
>>> +                    temperature = <125000>;
>>> +                    hysteresis = <1000>;
>>> +                    type = "critical";
>>> +                };
>>> +            };
>>> +        };
>>> +
>>> +        rfa-1-thermal {
>>> +            polling-delay-passive = <0>;
>>> +            polling-delay = <0>;
>>> +            thermal-sensors = <&tsens 12>;
>>> +
>>> +            trips {
>>> +                rfa-1-critical {
>>> +                    temperature = <125000>;
>>> +                    hysteresis = <1000>;
>>> +                    type = "critical";
>>> +                };
>>> +            };
>>> +        };
>>> +
>>> +        misc-thermal {
>>> +            polling-delay-passive = <0>;
>>> +            polling-delay = <0>;
>>> +            thermal-sensors = <&tsens 13>;
>>> +
>>> +            trips {
>>> +                misc-critical {
>>> +                    temperature = <125000>;
>>> +                    hysteresis = <1000>;
>>> +                    type = "critical";
>>> +                };
>>> +            };
>>> +        };
>>> +
>>> +        cpu-top-thermal {
>>> +            polling-delay-passive = <0>;
>>> +            polling-delay = <0>;
>>> +            thermal-sensors = <&tsens 14>;
>>> +
>>> +            trips {
>>> +                cpu-top-critical {
>>> +                    temperature = <125000>;
>>> +                    hysteresis = <1000>;
>>> +                    type = "critical";
>>> +                };
>>> +            };
>> Could you please add a passive cooling devices for the CPU?
>>
>>> +        };
>>> +
>>> +        top-glue-thermal {
>>> +            polling-delay-passive = <0>;
>>> +            polling-delay = <0>;
>>> +            thermal-sensors = <&tsens 15>;
>>> +
>>> +            trips {
>>> +                top-glue-critical {
>>> +                    temperature = <125000>;
>>> +                    hysteresis = <1000>;
>>> +                    type = "critical";
>>> +                };
>>> +            };
>>> +        };
>>> +    };
>>>    };
--
Thanks,
Praveenkumar

Praveenkumar I July 10, 2023, 1:54 p.m. UTC | #5

On 7/10/2023 7:04 PM, Praveenkumar I wrote:
>
> On 7/10/2023 5:44 PM, Konrad Dybcio wrote:
>> On 10.07.2023 13:23, Dmitry Baryshkov wrote:
>>> On 10/07/2023 13:37, Praveenkumar I wrote:
>>>> This patch adds thermal zone nodes for sensors present in
>>>> IPQ5332.
>>>>
>>>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
>>>> ---
>>>>    arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 
>>>> +++++++++++++++++++++++++++
>>>>    1 file changed, 72 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi 
>>>> b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>>> index a1e3527178c0..8b276aeca53e 100644
>>>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>>> @@ -527,4 +527,76 @@ timer {
>>>>                     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | 
>>>> IRQ_TYPE_LEVEL_LOW)>,
>>>>                     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | 
>>>> IRQ_TYPE_LEVEL_LOW)>;
>>>>        };
>>>> +
>>>> +    thermal-zones {
>>>> +        rfa-0-thermal{
>> thermal {
> In all other DTS, name is 'thermal-zones". Hence followed the same.
Sorry, understood now. Will give space after "rfa-0-thermal"
>>
>>>> +            polling-delay-passive = <0>;
>>>> +            polling-delay = <0>;
>>>> +            thermal-sensors = <&tsens 11>;
>>>> +
>>>> +            trips {
>> Indentation seems off, tab size for kernel code is 8 spaces.
> Sure, will check the indent and update in next patch.
>>
>> Konrad
>>>> +                rfa-0-critical {
>>>> +                    temperature = <125000>;
>>>> +                    hysteresis = <1000>;
>>>> +                    type = "critical";
>>>> +                };
>>>> +            };
>>>> +        };
>>>> +
>>>> +        rfa-1-thermal {
>>>> +            polling-delay-passive = <0>;
>>>> +            polling-delay = <0>;
>>>> +            thermal-sensors = <&tsens 12>;
>>>> +
>>>> +            trips {
>>>> +                rfa-1-critical {
>>>> +                    temperature = <125000>;
>>>> +                    hysteresis = <1000>;
>>>> +                    type = "critical";
>>>> +                };
>>>> +            };
>>>> +        };
>>>> +
>>>> +        misc-thermal {
>>>> +            polling-delay-passive = <0>;
>>>> +            polling-delay = <0>;
>>>> +            thermal-sensors = <&tsens 13>;
>>>> +
>>>> +            trips {
>>>> +                misc-critical {
>>>> +                    temperature = <125000>;
>>>> +                    hysteresis = <1000>;
>>>> +                    type = "critical";
>>>> +                };
>>>> +            };
>>>> +        };
>>>> +
>>>> +        cpu-top-thermal {
>>>> +            polling-delay-passive = <0>;
>>>> +            polling-delay = <0>;
>>>> +            thermal-sensors = <&tsens 14>;
>>>> +
>>>> +            trips {
>>>> +                cpu-top-critical {
>>>> +                    temperature = <125000>;
>>>> +                    hysteresis = <1000>;
>>>> +                    type = "critical";
>>>> +                };
>>>> +            };
>>> Could you please add a passive cooling devices for the CPU?
>>>
>>>> +        };
>>>> +
>>>> +        top-glue-thermal {
>>>> +            polling-delay-passive = <0>;
>>>> +            polling-delay = <0>;
>>>> +            thermal-sensors = <&tsens 15>;
>>>> +
>>>> +            trips {
>>>> +                top-glue-critical {
>>>> +                    temperature = <125000>;
>>>> +                    hysteresis = <1000>;
>>>> +                    type = "critical";
>>>> +                };
>>>> +            };
>>>> +        };
>>>> +    };
>>>>    };
> -- 
> Thanks,
> Praveenkumar

diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index a1e3527178c0..8b276aeca53e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -527,4 +527,76 @@  timer {
 			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	thermal-zones {
+		rfa-0-thermal{
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				rfa-0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rfa-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				rfa-1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		misc-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				misc-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				cpu-top-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top-glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };