diff mbox series

[RESEND,v6,6/7] riscv: dts: starfive: jh7110: Add syscon nodes

Message ID 20230704064610.292603-7-xingyu.wu@starfivetech.com
State New
Headers
Series Add PLL clocks driver and syscon for StarFive JH7110 SoC |

Commit Message

Xingyu Wu July 4, 2023, 6:46 a.m. UTC 
  From: William Qiu <william.qiu@starfivetech.com>

Add stg_syscon/sys_syscon/aon_syscon/PLL nodes for JH7110 SoC.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Co-developed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Emil Renner Berthing July 13, 2023, 1:21 p.m. UTC | #1 
On Tue, 4 Jul 2023 at 08:49, Xingyu Wu <xingyu.wu@starfivetech.com> wrote:
>
> From: William Qiu <william.qiu@starfivetech.com>
>
> Add stg_syscon/sys_syscon/aon_syscon/PLL nodes for JH7110 SoC.
>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Co-developed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> ---
>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index 4c5fdb905da8..11dd4c9d64b0 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -353,6 +353,11 @@ i2c2: i2c@10050000 {
>                         status = "disabled";
>                 };
>
> +               stg_syscon: syscon@10240000 {
> +                       compatible = "starfive,jh7110-stg-syscon", "syscon";
> +                       reg = <0x0 0x10240000 0x0 0x1000>;
> +               };
> +
>                 uart3: serial@12000000 {
>                         compatible = "snps,dw-apb-uart";
>                         reg = <0x0 0x12000000 0x0 0x10000>;
> @@ -457,6 +462,17 @@ syscrg: clock-controller@13020000 {
>                         #reset-cells = <1>;
>                 };
>
> +               sys_syscon: syscon@13030000 {
> +                       compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
> +                       reg = <0x0 0x13030000 0x0 0x1000>;
> +
> +                       pllclk: clock-controller {

Maybe call the handle "pll", so the references can be just <&pll 0>,
<&pll 1> and <&pll 2> if you choose to drop the JH7110_PLLCLK_PLL?_OUT
defines.

In any case:
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>

> +                               compatible = "starfive,jh7110-pll";
> +                               clocks = <&osc>;
> +                               #clock-cells = <1>;
> +                       };
> +               };
> +
>                 sysgpio: pinctrl@13040000 {
>                         compatible = "starfive,jh7110-sys-pinctrl";
>                         reg = <0x0 0x13040000 0x0 0x10000>;
> @@ -486,6 +502,12 @@ aoncrg: clock-controller@17000000 {
>                         #reset-cells = <1>;
>                 };
>
> +               aon_syscon: syscon@17010000 {
> +                       compatible = "starfive,jh7110-aon-syscon", "syscon";
> +                       reg = <0x0 0x17010000 0x0 0x1000>;
> +                       #power-domain-cells = <1>;
> +               };
> +
>                 aongpio: pinctrl@17020000 {
>                         compatible = "starfive,jh7110-aon-pinctrl";
>                         reg = <0x0 0x17020000 0x0 0x10000>;
> --
> 2.25.1
>
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..11dd4c9d64b0 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -353,6 +353,11 @@  i2c2: i2c@10050000 {
 			status = "disabled";
 		};
 
+		stg_syscon: syscon@10240000 {
+			compatible = "starfive,jh7110-stg-syscon", "syscon";
+			reg = <0x0 0x10240000 0x0 0x1000>;
+		};
+
 		uart3: serial@12000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
@@ -457,6 +462,17 @@  syscrg: clock-controller@13020000 {
 			#reset-cells = <1>;
 		};
 
+		sys_syscon: syscon@13030000 {
+			compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
+			reg = <0x0 0x13030000 0x0 0x1000>;
+
+			pllclk: clock-controller {
+				compatible = "starfive,jh7110-pll";
+				clocks = <&osc>;
+				#clock-cells = <1>;
+			};
+		};
+
 		sysgpio: pinctrl@13040000 {
 			compatible = "starfive,jh7110-sys-pinctrl";
 			reg = <0x0 0x13040000 0x0 0x10000>;
@@ -486,6 +502,12 @@  aoncrg: clock-controller@17000000 {
 			#reset-cells = <1>;
 		};
 
+		aon_syscon: syscon@17010000 {
+			compatible = "starfive,jh7110-aon-syscon", "syscon";
+			reg = <0x0 0x17010000 0x0 0x1000>;
+			#power-domain-cells = <1>;
+		};
+
 		aongpio: pinctrl@17020000 {
 			compatible = "starfive,jh7110-aon-pinctrl";
 			reg = <0x0 0x17020000 0x0 0x10000>;