diff mbox series

[RESEND,v6,1/7] dt-bindings: clock: Add StarFive JH7110 PLL clock generator

Message ID 20230704064610.292603-2-xingyu.wu@starfivetech.com
State New
Headers
Series Add PLL clocks driver and syscon for StarFive JH7110 SoC |

Commit Message

Xingyu Wu July 4, 2023, 6:46 a.m. UTC 
  Add bindings for the PLL clock generator on the JH7110 RISC-V SoC.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
---
 .../bindings/clock/starfive,jh7110-pll.yaml   | 46 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jh7110-crg.h   |  6 +++
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml

Comments

Emil Renner Berthing July 13, 2023, 12:26 p.m. UTC | #1 
On Tue, 4 Jul 2023 at 08:49, Xingyu Wu <xingyu.wu@starfivetech.com> wrote:
>
> Add bindings for the PLL clock generator on the JH7110 RISC-V SoC.
>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> ---
>  .../bindings/clock/starfive,jh7110-pll.yaml   | 46 +++++++++++++++++++
>  .../dt-bindings/clock/starfive,jh7110-crg.h   |  6 +++
>  2 files changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
> new file mode 100644
> index 000000000000..beb78add5a8d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 PLL Clock Generator
> +
> +description:
> +  These PLLs are high speed, low jitter frequency synthesizers in JH7110.

..synthesizers in the JH7110.

> +  Each PLL works in integer mode or fraction mode, with configuration
> +  registers in the sys syscon. So the PLLs node should be a child of
> +  SYS-SYSCON node.
> +  The formula for calculating frequency is
> +  Fvco = Fref * (NI + NF) / M / Q1
> +
> +maintainers:
> +  - Xingyu Wu <xingyu.wu@starfivetech.com>
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-pll
> +
> +  clocks:
> +    maxItems: 1
> +    description: Main Oscillator (24 MHz)
> +
> +  '#clock-cells':
> +    const: 1
> +    description:
> +      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
> +
> +required:
> +  - compatible
> +  - clocks
> +  - '#clock-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    clock-controller {
> +      compatible = "starfive,jh7110-pll";
> +      clocks = <&osc>;
> +      #clock-cells = <1>;
> +    };
> diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
> index 06257bfd9ac1..086a6ddcf380 100644
> --- a/include/dt-bindings/clock/starfive,jh7110-crg.h
> +++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
> @@ -6,6 +6,12 @@
>  #ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>  #define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>
> +/* PLL clocks */
> +#define JH7110_CLK_PLL0_OUT                    0
> +#define JH7110_CLK_PLL1_OUT                    1
> +#define JH7110_CLK_PLL2_OUT                    2
> +#define JH7110_PLLCLK_END                      3

It would be nice if these names followed the same pattern as the
clocks below. Eg. something like JH7110_PLLCLK_PLL?_OUT and
JH7110_PLLCLK_END.

But maybe these defines are not even needed, since you just do <&pll
0>, <&pll 1> and it's obvious what that means.

>  /* SYSCRG clocks */
>  #define JH7110_SYSCLK_CPU_ROOT                 0
>  #define JH7110_SYSCLK_CPU_CORE                 1
> --
> 2.25.1
>
Xingyu Wu July 14, 2023, 6:24 a.m. UTC | #2 
On 2023/7/13 20:26, Emil Renner Berthing wrote:
> On Tue, 4 Jul 2023 at 08:49, Xingyu Wu <xingyu.wu@starfivetech.com> wrote:
>>
>> Add bindings for the PLL clock generator on the JH7110 RISC-V SoC.
>>
>> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
>> ---
>>  .../bindings/clock/starfive,jh7110-pll.yaml   | 46 +++++++++++++++++++
>>  .../dt-bindings/clock/starfive,jh7110-crg.h   |  6 +++
>>  2 files changed, 52 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
>> new file mode 100644
>> index 000000000000..beb78add5a8d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
>> @@ -0,0 +1,46 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: StarFive JH7110 PLL Clock Generator
>> +
>> +description:
>> +  These PLLs are high speed, low jitter frequency synthesizers in JH7110.
> 
> ..synthesizers in the JH7110.

Will fix.

> 
>> +  Each PLL works in integer mode or fraction mode, with configuration
>> +  registers in the sys syscon. So the PLLs node should be a child of
>> +  SYS-SYSCON node.
>> +  The formula for calculating frequency is
>> +  Fvco = Fref * (NI + NF) / M / Q1
>> +
>> +maintainers:
>> +  - Xingyu Wu <xingyu.wu@starfivetech.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: starfive,jh7110-pll
>> +
>> +  clocks:
>> +    maxItems: 1
>> +    description: Main Oscillator (24 MHz)
>> +
>> +  '#clock-cells':
>> +    const: 1
>> +    description:
>> +      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
>> +
>> +required:
>> +  - compatible
>> +  - clocks
>> +  - '#clock-cells'
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    clock-controller {
>> +      compatible = "starfive,jh7110-pll";
>> +      clocks = <&osc>;
>> +      #clock-cells = <1>;
>> +    };
>> diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
>> index 06257bfd9ac1..086a6ddcf380 100644
>> --- a/include/dt-bindings/clock/starfive,jh7110-crg.h
>> +++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
>> @@ -6,6 +6,12 @@
>>  #ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>>  #define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>>
>> +/* PLL clocks */
>> +#define JH7110_CLK_PLL0_OUT                    0
>> +#define JH7110_CLK_PLL1_OUT                    1
>> +#define JH7110_CLK_PLL2_OUT                    2
>> +#define JH7110_PLLCLK_END                      3
> 
> It would be nice if these names followed the same pattern as the
> clocks below. Eg. something like JH7110_PLLCLK_PLL?_OUT and
> JH7110_PLLCLK_END.
> 
> But maybe these defines are not even needed, since you just do <&pll
> 0>, <&pll 1> and it's obvious what that means.

I prefer to keep these names because they are used in the PLL driver
and are more easy to understand than numbers.
I will use the JH7110_PLLCLK_PLL?_OUT to follow the same pattern
in next version.

Best regards,
Xingyu Wu

> 
>>  /* SYSCRG clocks */
>>  #define JH7110_SYSCLK_CPU_ROOT                 0
>>  #define JH7110_SYSCLK_CPU_CORE                 1
>> --
>> 2.25.1
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
new file mode 100644
index 000000000000..beb78add5a8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
@@ -0,0 +1,46 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PLL Clock Generator
+
+description:
+  These PLLs are high speed, low jitter frequency synthesizers in JH7110.
+  Each PLL works in integer mode or fraction mode, with configuration
+  registers in the sys syscon. So the PLLs node should be a child of
+  SYS-SYSCON node.
+  The formula for calculating frequency is
+  Fvco = Fref * (NI + NF) / M / Q1
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-pll
+
+  clocks:
+    maxItems: 1
+    description: Main Oscillator (24 MHz)
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+      compatible = "starfive,jh7110-pll";
+      clocks = <&osc>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
index 06257bfd9ac1..086a6ddcf380 100644
--- a/include/dt-bindings/clock/starfive,jh7110-crg.h
+++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
@@ -6,6 +6,12 @@ 
 #ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
 #define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
 
+/* PLL clocks */
+#define JH7110_CLK_PLL0_OUT			0
+#define JH7110_CLK_PLL1_OUT			1
+#define JH7110_CLK_PLL2_OUT			2
+#define JH7110_PLLCLK_END			3
+
 /* SYSCRG clocks */
 #define JH7110_SYSCLK_CPU_ROOT			0
 #define JH7110_SYSCLK_CPU_CORE			1