From patchwork Mon Jul 3 13:31:14 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 115370 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f45:0:b0:3ea:f831:8777 with SMTP id v5csp539254vqx; Mon, 3 Jul 2023 06:52:18 -0700 (PDT) X-Google-Smtp-Source: APBJJlF3svcbiIY220lTO2OYOzPxvNT2weiI7RaYBzbOc6PG14kQ3eutC9omkXVJmi1hnOHK+b3B X-Received: by 2002:a17:903:94:b0:1ac:40f7:8b5a with SMTP id o20-20020a170903009400b001ac40f78b5amr10825820pld.3.1688392338321; Mon, 03 Jul 2023 06:52:18 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1688392338; cv=none; d=google.com; s=arc-20160816; b=zSsKbAlN1thdVd5fH1ijd1JRJ7sGmVcOx/1hxPK6Oqh0n45qkCCMWYiEmHHdrzZDBt E5ZL7dUJ1pzAs27vSTSlo0mefcNzw2S96FpZ77Aciax2NHUbT7ia2UEiePHuvDktrFj6 g0fh4dAziFCGchH3ZSjyB9patyYxOSRkk8Z3YWjxtVYhnZ+WNjEoO9ZFhayY2Y6Nonbt LQs7epmvX32kvpn5agYbcnlGEb+UxhmZduzdR/JwC5nKbZyHfQJc0OWsAh0YwoiBFOgV H/H8QD5gNBq88zAuYzzsgaYuaHnBN4J4wnYMD5URap0OF17bNo6pCAy18oJS358Z5pGH kcIQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=jrefK8/PwFCkX5pIXHy+fvuyVY7YugWgUcP56e2MTgw=; fh=EV+5bRVCKNG17q531vPQpoKiuN4tfzBrxhdEOIK2W5o=; b=RtKRrCYxalI/1q9JycuX3oDp8sljI2J1EQQvK2Qw1+PiRwIGusITWpbN8wCIkWftOt BmtvqJsi8kh+zB35ubM6Qyh6fbnxRYfp0+aUGP5+7sW8HjOULoa4lkpx9wVcoaE3+NIF sTFj4fJax6CRlr8Dmzygq8cfhxZT0JFGipy3ETyzDJgmGVBU0aJ8skpCKvIF9olkyjDt w6dBA012UvWDwjUSqhUbeo0S8A3cRDcZG8/BViwWMHFoFMmMi2nP5SLdqIAJ9YoEFDHU TzNVhLmnZnSNszPIf2jltM/oRCyz4tRx0Xk98ItQa12TYjJz68kdhC/QjJEOxrFNsIPJ 9a/Q== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=HzCv0pW7; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id q15-20020a17090311cf00b001a97a54c3a2si19932778plh.197.2023.07.03.06.52.04; Mon, 03 Jul 2023 06:52:18 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=HzCv0pW7; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231623AbjGCNbs (ORCPT + 99 others); Mon, 3 Jul 2023 09:31:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53560 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231621AbjGCNbd (ORCPT ); Mon, 3 Jul 2023 09:31:33 -0400 Received: from mail-lf1-x131.google.com (mail-lf1-x131.google.com [IPv6:2a00:1450:4864:20::131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5D6D8E7A for ; Mon, 3 Jul 2023 06:31:23 -0700 (PDT) Received: by mail-lf1-x131.google.com with SMTP id 2adb3069b0e04-4f9fdb0ef35so7084308e87.0 for ; Mon, 03 Jul 2023 06:31:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1688391081; x=1690983081; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=jrefK8/PwFCkX5pIXHy+fvuyVY7YugWgUcP56e2MTgw=; b=HzCv0pW7TPsAck1rWghAm02q2yt/HBzROM1oIyfB5qzGD+iJBee4h44EfePcDKv/ME WlT6+sbB9mIUTLXDQ/mhEoT9Y/1Jb1lIzXQAxk/VSByEcB4sbeBjO1dKppzI177pOtc1 lZfUCewju6od/DqrYi6YvVBBzQfQVbkqUoDGS1MlcCFDCkICp16fXJ3g0ZWe7cjRbA6q ldmTzmMIooF4KNQFYnsbY7jg2rH/n8Roj5Jr4Ye+Xus1I+A5GeYlkB9klbbtdjpG8ab3 FRpQLYJ4ZtYeYLL6dKnpLdIf0cjJAjP1pid2yKak3eOdfPZt23ETyOl81xIzMD8HuGmR dmeA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1688391081; x=1690983081; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=jrefK8/PwFCkX5pIXHy+fvuyVY7YugWgUcP56e2MTgw=; b=iS17shfVcQmwmPCS8Lx3nUCVx0smtv9Yl6WT1Fkvh+Pw0d0gK1he9yMhxV+cmo2aiZ dpL5fNRU30v/6aJy2aQO7BqkFRAD8mGO4Wk9WGZCyRzQ38+OeQZmWgAweQkhfWp29udi ZbkKujbgknifsWQl+AG33HVytbomQvUKwCoCEKrzo4kBkPjpIREhTTjf2btum91xPB8M ycYbk8E9/jlDT+EcEEkngyEXz7qZ8ANHIUJH0Y5IE3gZXvVEo057609ENpVeGZtm6kQn IlF8J/ryG/wAMVSKHBJXEWHLgosMtaQNak3F1AkOCZYcBBjFNFIoy23AjjBgnkf5Zw2o sPlg== X-Gm-Message-State: ABy/qLYzKiG/xKH3cC4q2pcqoLG370A58OtH8p3GJ3+gk79n23yXC8+B CUrdRRPRWONRhfh+Ib3JxlcU1g== X-Received: by 2002:a05:6512:3703:b0:4f8:7551:7485 with SMTP id z3-20020a056512370300b004f875517485mr5342676lfr.5.1688391081053; Mon, 03 Jul 2023 06:31:21 -0700 (PDT) Received: from [192.168.1.101] (abyj26.neoplus.adsl.tpnet.pl. [83.9.29.26]) by smtp.gmail.com with ESMTPSA id ep7-20020a056512484700b004fbb1f70ceesm833417lfb.227.2023.07.03.06.31.19 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 03 Jul 2023 06:31:20 -0700 (PDT) From: Konrad Dybcio Date: Mon, 03 Jul 2023 15:31:14 +0200 Subject: [PATCH 5/5] arm64: dts: qcom: sm8250: Add interconnects and power-domains to QUPs MIME-Version: 1.0 Message-Id: <20230703-topic-8250_qup_icc-v1-5-fea39aa07525@linaro.org> References: <20230703-topic-8250_qup_icc-v1-0-fea39aa07525@linaro.org> In-Reply-To: <20230703-topic-8250_qup_icc-v1-0-fea39aa07525@linaro.org> To: Andy Gross , Bjorn Andersson , Mark Brown , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Greg Kroah-Hartman , Andi Shyti Cc: Marijn Suijten , Krzysztof Kozlowski , linux-arm-msm@vger.kernel.org, linux-spi@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, linux-i2c@vger.kernel.org, Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1688391072; l=20635; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=6sUJWs3uxT99bYspriYn1C039w1VdT+N8WiwYSJREPo=; b=8lQCglMSF9hO/+Ac5DQiOSr/lbjk+1qBSxdwNkARdIUOVPweSFMlfQfxcfXyajIuNzL9lgKD6 WfxrfHGMwUnDXGK9N/q+0FV5G2Cvwd8g3r9372f54FjcbOQ7uZFbRzX X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1770407684491052628?= X-GMAIL-MSGID: =?utf-8?q?1770407684491052628?= Describe the interconnect paths related to QUPs and add the power-domains powering them. This is required for icc sync_state, as otherwise QUP access is gated. Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 150 +++++++++++++++++++++++++++++++++++ 1 file changed, 150 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 1efa07f2caff..35111fce898a 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -1022,6 +1022,10 @@ i2c14: i2c@880000 { dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, <&gpi_dma2 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1038,6 +1042,9 @@ spi14: spi@880000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1054,6 +1061,10 @@ i2c15: i2c@884000 { dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, <&gpi_dma2 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1070,6 +1081,9 @@ spi15: spi@884000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1086,6 +1100,10 @@ i2c16: i2c@888000 { dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, <&gpi_dma2 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1102,6 +1120,9 @@ spi16: spi@888000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1118,6 +1139,10 @@ i2c17: i2c@88c000 { dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, <&gpi_dma2 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1134,6 +1159,9 @@ spi17: spi@88c000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1149,6 +1177,8 @@ uart17: serial@88c000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-config"; status = "disabled"; }; @@ -1163,6 +1193,10 @@ i2c18: i2c@890000 { dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, <&gpi_dma2 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1179,6 +1213,9 @@ spi18: spi@890000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1194,6 +1231,8 @@ uart18: serial@890000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-config"; status = "disabled"; }; @@ -1208,6 +1247,10 @@ i2c19: i2c@894000 { dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, <&gpi_dma2 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1224,6 +1267,9 @@ spi19: spi@894000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1276,6 +1322,10 @@ i2c0: i2c@980000 { dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1292,6 +1342,9 @@ spi0: spi@980000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1308,6 +1361,10 @@ i2c1: i2c@984000 { dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1324,6 +1381,9 @@ spi1: spi@984000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1340,6 +1400,10 @@ i2c2: i2c@988000 { dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1356,6 +1420,9 @@ spi2: spi@988000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1371,6 +1438,8 @@ uart2: serial@988000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-config"; status = "disabled"; }; @@ -1385,6 +1454,10 @@ i2c3: i2c@98c000 { dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1401,6 +1474,9 @@ spi3: spi@98c000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1417,6 +1493,10 @@ i2c4: i2c@990000 { dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1433,6 +1513,9 @@ spi4: spi@990000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1449,6 +1532,10 @@ i2c5: i2c@994000 { dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1465,6 +1552,9 @@ spi5: spi@994000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1481,6 +1571,10 @@ i2c6: i2c@998000 { dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1497,6 +1591,9 @@ spi6: spi@998000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1512,6 +1609,8 @@ uart6: serial@998000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-config"; status = "disabled"; }; @@ -1526,6 +1625,10 @@ i2c7: i2c@99c000 { dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1542,6 +1645,9 @@ spi7: spi@99c000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1591,6 +1697,10 @@ i2c8: i2c@a80000 { dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1607,6 +1717,9 @@ spi8: spi@a80000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1623,6 +1736,10 @@ i2c9: i2c@a84000 { dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1639,6 +1756,9 @@ spi9: spi@a84000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1655,6 +1775,10 @@ i2c10: i2c@a88000 { dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1671,6 +1795,9 @@ spi10: spi@a88000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1687,6 +1814,10 @@ i2c11: i2c@a8c000 { dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1703,6 +1834,9 @@ spi11: spi@a8c000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1719,6 +1853,10 @@ i2c12: i2c@a90000 { dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1735,6 +1873,9 @@ spi12: spi@a90000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1750,6 +1891,8 @@ uart12: serial@a90000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-config"; status = "disabled"; }; @@ -1764,6 +1907,10 @@ i2c13: i2c@a94000 { dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1780,6 +1927,9 @@ spi13: spi@a94000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled";