diff mbox series

[RFC,7/8] ASoC: Intel: Skylake: Update PCI ID list

Message ID 20230628205135.517241-8-amadeuszx.slawinski@linux.intel.com
State New
Headers
Series PCI: Define Intel PCI IDs and use them in drivers |

Commit Message

Amadeusz Sławiński June 28, 2023, 8:51 p.m. UTC 
  Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA macro, to simplify declarations.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
---
 sound/soc/intel/skylake/skl-messages.c | 16 ++++++------
 sound/soc/intel/skylake/skl.c          | 36 +++++++-------------------
 2 files changed, 18 insertions(+), 34 deletions(-)

Comments

Andy Shevchenko June 28, 2023, 2:52 p.m. UTC | #1 
On Wed, Jun 28, 2023 at 10:51:34PM +0200, Amadeusz Sławiński wrote:
> Use PCI device IDs from pci_ids.h header and while at it change to using
> PCI_DEVICE_DATA macro, to simplify declarations.

PCI_DEVICE_DATA()

...

> +	{ PCI_DEVICE_DATA(INTEL, HDA_SKL_LP,	&snd_soc_acpi_intel_skl_machines) },

Do you really need TAB(s) in the parameter list?
Amadeusz Sławiński June 29, 2023, 8:19 a.m. UTC | #2 
On 6/28/2023 4:52 PM, Andy Shevchenko wrote:
> On Wed, Jun 28, 2023 at 10:51:34PM +0200, Amadeusz Sławiński wrote:
>> Use PCI device IDs from pci_ids.h header and while at it change to using
>> PCI_DEVICE_DATA macro, to simplify declarations.
> 
> PCI_DEVICE_DATA()
> 
> ...
> 
>> +	{ PCI_DEVICE_DATA(INTEL, HDA_SKL_LP,	&snd_soc_acpi_intel_skl_machines) },
> 
> Do you really need TAB(s) in the parameter list?
> 

I did this to align entries, I know it is not that visible in this 
patch, but they are defined close to each other and I feel that it looks 
better if they are aligned, but can drop alignment if you prefer. Should 
I also drop them in other patches, as I don't see comment for that?
Andy Shevchenko June 29, 2023, 9:28 a.m. UTC | #3 
On Thu, Jun 29, 2023 at 10:19:06AM +0200, Amadeusz Sławiński wrote:
> On 6/28/2023 4:52 PM, Andy Shevchenko wrote:
> > On Wed, Jun 28, 2023 at 10:51:34PM +0200, Amadeusz Sławiński wrote:

...

> > > +	{ PCI_DEVICE_DATA(INTEL, HDA_SKL_LP,	&snd_soc_acpi_intel_skl_machines) },
> > 
> > Do you really need TAB(s) in the parameter list?
> 
> I did this to align entries, I know it is not that visible in this patch,
> but they are defined close to each other and I feel that it looks better if
> they are aligned, but can drop alignment if you prefer. Should I also drop
> them in other patches, as I don't see comment for that?

I think we may survive without TABs, but the maintainers may have the last
word on this.
diff mbox series

Patch

diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c
index d31509298a0a..fc2eb04da172 100644
--- a/sound/soc/intel/skylake/skl-messages.c
+++ b/sound/soc/intel/skylake/skl-messages.c
@@ -169,7 +169,7 @@  static struct skl_dsp_loader_ops bxt_get_loader_ops(void)
 
 static const struct skl_dsp_ops dsp_ops[] = {
 	{
-		.id = 0x9d70,
+		.id = PCI_DEVICE_ID_INTEL_HDA_SKL_LP,
 		.num_cores = 2,
 		.loader_ops = skl_get_loader_ops,
 		.init = skl_sst_dsp_init,
@@ -177,7 +177,7 @@  static const struct skl_dsp_ops dsp_ops[] = {
 		.cleanup = skl_sst_dsp_cleanup
 	},
 	{
-		.id = 0x9d71,
+		.id = PCI_DEVICE_ID_INTEL_HDA_KBL_LP,
 		.num_cores = 2,
 		.loader_ops = skl_get_loader_ops,
 		.init = skl_sst_dsp_init,
@@ -185,7 +185,7 @@  static const struct skl_dsp_ops dsp_ops[] = {
 		.cleanup = skl_sst_dsp_cleanup
 	},
 	{
-		.id = 0x5a98,
+		.id = PCI_DEVICE_ID_INTEL_HDA_APL,
 		.num_cores = 2,
 		.loader_ops = bxt_get_loader_ops,
 		.init = bxt_sst_dsp_init,
@@ -193,7 +193,7 @@  static const struct skl_dsp_ops dsp_ops[] = {
 		.cleanup = bxt_sst_dsp_cleanup
 	},
 	{
-		.id = 0x3198,
+		.id = PCI_DEVICE_ID_INTEL_HDA_GML,
 		.num_cores = 2,
 		.loader_ops = bxt_get_loader_ops,
 		.init = bxt_sst_dsp_init,
@@ -201,7 +201,7 @@  static const struct skl_dsp_ops dsp_ops[] = {
 		.cleanup = bxt_sst_dsp_cleanup
 	},
 	{
-		.id = 0x9dc8,
+		.id = PCI_DEVICE_ID_INTEL_HDA_CNL_LP,
 		.num_cores = 4,
 		.loader_ops = bxt_get_loader_ops,
 		.init = cnl_sst_dsp_init,
@@ -209,7 +209,7 @@  static const struct skl_dsp_ops dsp_ops[] = {
 		.cleanup = cnl_sst_dsp_cleanup
 	},
 	{
-		.id = 0xa348,
+		.id = PCI_DEVICE_ID_INTEL_HDA_CNL_H,
 		.num_cores = 4,
 		.loader_ops = bxt_get_loader_ops,
 		.init = cnl_sst_dsp_init,
@@ -217,7 +217,7 @@  static const struct skl_dsp_ops dsp_ops[] = {
 		.cleanup = cnl_sst_dsp_cleanup
 	},
 	{
-		.id = 0x02c8,
+		.id = PCI_DEVICE_ID_INTEL_HDA_CML_LP,
 		.num_cores = 4,
 		.loader_ops = bxt_get_loader_ops,
 		.init = cnl_sst_dsp_init,
@@ -225,7 +225,7 @@  static const struct skl_dsp_ops dsp_ops[] = {
 		.cleanup = cnl_sst_dsp_cleanup
 	},
 	{
-		.id = 0x06c8,
+		.id = PCI_DEVICE_ID_INTEL_HDA_CML_H,
 		.num_cores = 4,
 		.loader_ops = bxt_get_loader_ops,
 		.init = cnl_sst_dsp_init,
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index 998bd0232cf1..b17bce07e401 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -608,8 +608,8 @@  struct skl_clk_parent_src *skl_get_parent_clk(u8 clk_id)
 static void init_skl_xtal_rate(int pci_id)
 {
 	switch (pci_id) {
-	case 0x9d70:
-	case 0x9d71:
+	case PCI_DEVICE_ID_INTEL_HDA_SKL_LP:
+	case PCI_DEVICE_ID_INTEL_HDA_KBL_LP:
 		skl_clk_src[0].rate = 24000000;
 		return;
 
@@ -1145,44 +1145,28 @@  static void skl_remove(struct pci_dev *pci)
 /* PCI IDs */
 static const struct pci_device_id skl_ids[] = {
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_SKL)
-	/* Sunrise Point-LP */
-	{ PCI_DEVICE(0x8086, 0x9d70),
-		.driver_data = (unsigned long)&snd_soc_acpi_intel_skl_machines},
+	{ PCI_DEVICE_DATA(INTEL, HDA_SKL_LP,	&snd_soc_acpi_intel_skl_machines) },
 #endif
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_APL)
-	/* BXT-P */
-	{ PCI_DEVICE(0x8086, 0x5a98),
-		.driver_data = (unsigned long)&snd_soc_acpi_intel_bxt_machines},
+	{ PCI_DEVICE_DATA(INTEL, HDA_APL,	&snd_soc_acpi_intel_bxt_machines) },
 #endif
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_KBL)
-	/* KBL */
-	{ PCI_DEVICE(0x8086, 0x9D71),
-		.driver_data = (unsigned long)&snd_soc_acpi_intel_kbl_machines},
+	{ PCI_DEVICE_DATA(INTEL, HDA_KBL_LP,	&snd_soc_acpi_intel_kbl_machines) },
 #endif
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_GLK)
-	/* GLK */
-	{ PCI_DEVICE(0x8086, 0x3198),
-		.driver_data = (unsigned long)&snd_soc_acpi_intel_glk_machines},
+	{ PCI_DEVICE_DATA(INTEL, HDA_GML,	&snd_soc_acpi_intel_glk_machines) },
 #endif
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_CNL)
-	/* CNL */
-	{ PCI_DEVICE(0x8086, 0x9dc8),
-		.driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines},
+	{ PCI_DEVICE_DATA(INTEL, HDA_CNL_LP,	&snd_soc_acpi_intel_cnl_machines) },
 #endif
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_CFL)
-	/* CFL */
-	{ PCI_DEVICE(0x8086, 0xa348),
-		.driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines},
+	{ PCI_DEVICE_DATA(INTEL, HDA_CNL_H,	&snd_soc_acpi_intel_cnl_machines) },
 #endif
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_CML_LP)
-	/* CML-LP */
-	{ PCI_DEVICE(0x8086, 0x02c8),
-		.driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines},
+	{ PCI_DEVICE_DATA(INTEL, HDA_CML_LP,	&snd_soc_acpi_intel_cnl_machines) },
 #endif
 #if IS_ENABLED(CONFIG_SND_SOC_INTEL_CML_H)
-	/* CML-H */
-	{ PCI_DEVICE(0x8086, 0x06c8),
-		.driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines},
+	{ PCI_DEVICE_DATA(INTEL, HDA_CML_H,	&snd_soc_acpi_intel_cnl_machines) },
 #endif
 	{ 0, }
 };