[v2,19/45] dt-bindings: mfd: at91: Add SAM9X7 compatible string

Message ID 20230623203056.689705-20-varshini.rajendran@microchip.com
State New
Headers
Series Add support for sam9x7 SoC family |

Commit Message

Varshini Rajendran June 23, 2023, 8:30 p.m. UTC
  Document sam9x7 DT for flexcom.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
  

Comments

Krzysztof Kozlowski June 24, 2023, 8:23 a.m. UTC | #1
On 23/06/2023 22:30, Varshini Rajendran wrote:
> Document sam9x7 DT for flexcom.
> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> ---
>  Documentation/devicetree/bindings/mfd/atmel-flexcom.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> index 9d837535637b..449e0af93a13 100644
> --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> @@ -5,7 +5,7 @@ controller and an USART. Only one function can be used at a time and is chosen
>  at boot time according to the device tree.
>  
>  Required properties:
> -- compatible:		Should be "atmel,sama5d2-flexcom"
> +- compatible:		Should be "atmel,sama5d2-flexcom" or "microchip,sam9x7-flexcom"

That's not what your DTS is saying. NAK.

Best regards,
Krzysztof
  

Patch

diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
index 9d837535637b..449e0af93a13 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
@@ -5,7 +5,7 @@  controller and an USART. Only one function can be used at a time and is chosen
 at boot time according to the device tree.
 
 Required properties:
-- compatible:		Should be "atmel,sama5d2-flexcom"
+- compatible:		Should be "atmel,sama5d2-flexcom" or "microchip,sam9x7-flexcom"
 - reg:			Should be the offset/length value for Flexcom dedicated
 			I/O registers (without USART, TWI or SPI registers).
 - clocks:		Should be the Flexcom peripheral clock from PMC.