diff mbox series

[v4,4/5] mtd: rawnand: qcom: Add support for erase exec_ops

Message ID 20230615073143.25079-4-quic_mdalam@quicinc.com
State New
Headers
Series [v4,1/5] mtd: rawnand: qcom: Implement exec_op() |

Commit Message

Md Sadre Alam June 15, 2023, 7:31 a.m. UTC 
  Add support for ERASE exec_ops.

Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---
Change in [v4]

* Updated commit message

* Fix spelling mistake of sbumitting to submitting

* Remove Dummy function qcom_data_read_type_exec() and
  qcom_data_write_type_exec() and corresponding exec_ops
  pattern.

Change in [v3]

* Removed chip->cont_read.ongoing flag.

* Removed pre_command from erase_etype_exec_ops.

Change in [v2]

* Missed to post Cover-letter, so posting v2 patch with cover-letter.

Change in [v1]

* Added initial support for exec_ops.

 drivers/mtd/nand/raw/qcom_nandc.c | 65 ++++++++++++++++++++++++++++++-
 1 file changed, 63 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 7b42b1e3cf33..2afac4bca8b5 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -1546,8 +1546,7 @@  static void pre_command(struct qcom_nand_host *host, int command)
 
 	clear_read_regs(nandc);
 
-	if (command == NAND_CMD_ERASE1)
-		clear_bam_transaction(nandc);
+	clear_bam_transaction(nandc);
 }
 
 /*
@@ -2183,12 +2182,20 @@  static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf,
 {
 	struct qcom_nand_host *host = to_qcom_nand_host(chip);
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	u8 *data_buf, *oob_buf = NULL;
 
 	if (host->nr_boot_partitions)
 		qcom_nandc_codeword_fixup(host, page);
 
 	nand_read_page_op(chip, page, 0, NULL, 0);
+	nandc->buf_count = 0;
+	nandc->buf_start = 0;
+	host->use_ecc = true;
+	clear_read_regs(nandc);
+	set_address(host, 0, page);
+	update_rw_regs(host, ecc->steps, true, 0);
+
 	data_buf = buf;
 	oob_buf = oob_required ? chip->oob_poi : NULL;
 
@@ -2258,6 +2265,9 @@  static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 
 	nand_prog_page_begin_op(chip, page, 0, NULL, 0);
 
+	set_address(host, 0, page);
+	nandc->buf_count = 0;
+	nandc->buf_start = 0;
 	clear_read_regs(nandc);
 	clear_bam_transaction(nandc);
 
@@ -3274,6 +3284,51 @@  static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
 	return ret;
 }
 
+static int qcom_erase_cmd_type_exec(struct nand_chip *chip, const struct nand_subop *subop)
+{
+	struct qcom_nand_host *host = to_qcom_nand_host(chip);
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct qcom_op q_op;
+	int ret = 0;
+
+	qcom_parse_instructions(chip, subop, &q_op);
+
+	q_op.cmd_reg |= PAGE_ACC | LAST_PAGE;
+
+	nandc->buf_count = 0;
+	nandc->buf_start = 0;
+	host->use_ecc = false;
+	clear_read_regs(nandc);
+	clear_bam_transaction(nandc);
+
+	nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
+	nandc_set_reg(chip, NAND_ADDR0, q_op.addr1_reg);
+	nandc_set_reg(chip, NAND_ADDR1, q_op.addr2_reg);
+	nandc_set_reg(chip, NAND_DEV0_CFG0,
+		      host->cfg0_raw & ~(7 << CW_PER_PAGE));
+	nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw);
+	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
+
+	write_reg_dma(nandc, NAND_FLASH_CMD, 3, NAND_BAM_NEXT_SGL);
+	write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
+	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+
+	ret = submit_descs(nandc);
+	if (ret) {
+		dev_err(nandc->dev, "failure in submitting erase descriptor\n");
+		free_descs(nandc);
+		goto err_out;
+	}
+	free_descs(nandc);
+
+	ret = qcom_wait_rdy_poll(chip, q_op.rdy_timeout_ms);
+	if (ret)
+		goto err_out;
+
+err_out:
+	return ret;
+}
+
 static const struct nand_op_parser qcom_op_parser = NAND_OP_PARSER(
 		NAND_OP_PARSER_PATTERN(
 			qcom_misc_cmd_type_exec,
@@ -3294,6 +3349,12 @@  static const struct nand_op_parser qcom_op_parser = NAND_OP_PARSER(
 			NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYCLE),
 			NAND_OP_PARSER_PAT_WAITRDY_ELEM(true),
 			NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 512)),
+		NAND_OP_PARSER_PATTERN(
+			qcom_erase_cmd_type_exec,
+			NAND_OP_PARSER_PAT_CMD_ELEM(false),
+			NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYCLE),
+			NAND_OP_PARSER_PAT_CMD_ELEM(false),
+			NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)),
 		);
 
 static int qcom_check_op(struct nand_chip *chip,