dt-bindings: mfd: brcm: drop unneeded quotes and use absolute /schemas path
Commit Message
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint. Also absolute path
starting with /schemas is preferred.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml | 4 ++--
.../devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml | 4 ++--
.../devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml | 4 ++--
.../devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml | 4 ++--
.../devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml | 4 ++--
.../devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml | 4 ++--
6 files changed, 12 insertions(+), 12 deletions(-)
Comments
On Fri, 09 Jun 2023, Krzysztof Kozlowski wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint. Also absolute path
> starting with /schemas is preferred.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml | 4 ++--
> .../devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml | 4 ++--
> .../devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml | 4 ++--
> .../devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml | 4 ++--
> .../devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml | 4 ++--
> .../devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml | 4 ++--
> 6 files changed, 12 insertions(+), 12 deletions(-)
Doesn't apply. Please rebase and resubmit.
@@ -35,7 +35,7 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+ $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
"^pinctrl@[0-9a-f]+$":
# Child node
type: object
- $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml"
+ $ref: /schemas/pinctrl/brcm,bcm6318-pinctrl.yaml
description:
Pin controller for the SoC pins. This child node definition
should follow the bindings specified in
@@ -35,7 +35,7 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+ $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
"^pinctrl@[0-9a-f]+$":
# Child node
type: object
- $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml"
+ $ref: /schemas/pinctrl/brcm,bcm63268-pinctrl.yaml
description:
Pin controller for the SoC pins. This child node definition
should follow the bindings specified in
@@ -35,7 +35,7 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+ $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
"^pinctrl@[0-9a-f]+$":
# Child node
type: object
- $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml"
+ $ref: /schemas/pinctrl/brcm,bcm6328-pinctrl.yaml
description:
Pin controller for the SoC pins. This child node definition
should follow the bindings specified in
@@ -35,7 +35,7 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+ $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
"^pinctrl@[0-9a-f]+$":
# Child node
type: object
- $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml"
+ $ref: /schemas/pinctrl/brcm,bcm6358-pinctrl.yaml
description:
Pin controller for the SoC pins. This child node definition
should follow the bindings specified in
@@ -35,7 +35,7 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+ $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
"^pinctrl@[0-9a-f]+$":
# Child node
type: object
- $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml"
+ $ref: /schemas/pinctrl/brcm,bcm6362-pinctrl.yaml
description:
Pin controller for the SoC pins. This child node definition
should follow the bindings specified in
@@ -35,7 +35,7 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
+ $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
@@ -44,7 +44,7 @@ patternProperties:
"^pinctrl@[0-9a-f]+$":
# Child node
type: object
- $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml"
+ $ref: /schemas/pinctrl/brcm,bcm6368-pinctrl.yaml
description:
Pin controller for the SoC pins. This child node definition
should follow the bindings specified in