@@ -141,6 +141,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
new file mode 100644
@@ -0,0 +1,629 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx93-tqma9352.dtsi"
+
+/{
+ model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
+ compatible = "tq,imx93-tqma9352-mba93xxla",
+ "tq,imx93-tqma9352", "fsl,imx93";
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ aliases {
+ eeprom0 = &eeprom0;
+ rtc0 = &pcf85063;
+ rtc1 = &bbnsm_rtc;
+ };
+
+ backlight_lvds: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&tpm5 0 5000000 0>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_12v0>;
+ enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ dp_refclk: dp-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ switch-a {
+ label = "switcha";
+ linux,code = <BTN_0>;
+ gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ switch-b {
+ label = "switchb";
+ linux,code = <BTN_1>;
+ gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_MB";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_3v8: regulator-3v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V8";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ /* TODO: this is supply for IOT module */
+ regulator-always-on;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_5V0_MB";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy_eqos>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy_eqos: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos_phy>;
+ reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ enet-phy-lane-no-swap;
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy_fec>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy_fec: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_phy>;
+ reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ enet-phy-lane-no-swap;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_3v3>;
+ status = "okay";
+};
+
+&gpio1 {
+ expander-irq-hog {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "PEX_INT#";
+ };
+
+ rtc-irq-hog {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "RTC_EVENT#";
+ };
+};
+
+&gpio3 {
+ ethphy-eqos-irq-hog {
+ gpio-hog;
+ gpios = <26 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "ENET0_IRQ#";
+ };
+
+ ethphy-fec-irq-hog {
+ gpio-hog;
+ gpios = <27 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "ENET1_IRQ#";
+ };
+};
+
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-1 = <&pinctrl_lpi2c3>;
+ status = "okay";
+
+ temperature-sensor@1c {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x1c>;
+ };
+
+ eeprom2: eeprom@54 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x54>;
+ pagesize = <16>;
+ vcc-supply = <®_3v3>;
+ };
+
+ expander0: gpio@70 {
+ compatible = "nxp,pca9538";
+ reg = <0x70>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pexp_irq>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "3V8_EN", "",
+ "", "IOT_PWRKEY",
+ "IOT_RESET", "IOT_W_DISABLE",
+ "BUTTON_A#", "BUTTON_B#";
+
+ /*
+ * Controls the IOT W_DISABLE pin which is low active
+ * as disable signal but inverted as seen from the CPU.
+ * The output-low states, the signal is
+ * inactive, e.g. not disabled
+ */
+ iot_wdisable_hog: iot-wdisable-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "IOT_W_DISABLE";
+ };
+ };
+
+ expander1: gpio@71 {
+ compatible = "nxp,pca9538";
+ reg = <0x71>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+ "USB_RESET#", "",
+ "WLAN_PD#", "WLAN_W_DISABLE#",
+ "WLAN_PERST#", "12V_EN";
+
+ /*
+ * Controls the WiFi card PD pin which is low active
+ * as power down signal. The output-low states, the signal
+ * is inactive, e.g. not power down
+ */
+ wlan-pd-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "WLAN_PD#";
+ };
+
+ /*
+ * Controls the WiFi card disable pin which is low active
+ * as disable signal. The output-low states, the signal
+ * is inactive, e.g. not disabled
+ */
+ wlan-wdisable-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "WLAN_W_DISABLE#";
+ };
+
+ /*
+ * Controls the WiFi card reset pin which is low active
+ * as reset signal. The output-low states, the signal
+ * is inactive, e.g. not in reset
+ */
+ wlan-perst-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "WLAN_PERST#";
+ };
+ };
+
+ expander2: gpio@72 {
+ compatible = "nxp,pca9538";
+ reg = <0x72>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+ "LCD_BL_EN", "DP_EN",
+ "MIPI_CSI_EN", "MIPI_CSI_RST#",
+ "USER_LED1", "USER_LED2";
+ };
+};
+
+&lpi2c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c5>;
+ pinctrl-1 = <&pinctrl_lpi2c5>;
+ status = "okay";
+
+ dp_bridge: dp-bridge@f {
+ compatible = "toshiba,tc358767";
+ reg = <0x0f>;
+ reset-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+ clock-names = "ref";
+ clocks = <&dp_refclk>;
+ toshiba,hpd-pin = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dp_dsi_in: endpoint {
+ };
+ };
+ };
+ };
+};
+
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "disabled";
+};
+
+&lpuart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+&lpuart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8>;
+ status = "okay";
+};
+
+&pcf85063 {
+ /* RTC_EVENT# is connected on MBa93xxLA */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcf85063>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&tpm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ disable-wp;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e
+ MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000051e
+ /* PD | FSEL_2 | DSE X6 */
+ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
+ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
+ MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
+ MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
+ /* PD | FSEL_3 | DSE X6 */
+ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe
+ MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e
+ MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e
+ MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e
+ MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e
+ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e
+ /* PD | FSEL_3 | DSE X3 */
+ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
+ >;
+ };
+
+ pinctrl_eqos_phy: eqosphygrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1306
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e
+ MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000051e
+ /* PD | FSEL_2 | DSE X6 */
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
+ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
+ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
+ /* PD | FSEL_3 | DSE X6 */
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe
+ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e
+ MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e
+ MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x51e
+ MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x51e
+ MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x51e
+ /* PD | FSEL_3 | DSE X3 */
+ MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e
+ >;
+ };
+
+ pinctrl_fec_phy: fecphygrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1306
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
+ MX93_PAD_PDM_CLK__CAN1_TX 0x139e
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO25__CAN2_TX 0x139e
+ MX93_PAD_GPIO_IO27__CAN2_RX 0x139e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c5: lpi2c5grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_pcf85063: pcf85063grp {
+ fsl,pins = <
+ MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x1306
+ >;
+ };
+
+ pinctrl_pexp_irq: pexpirqgrp {
+ fsl,pins = <
+ MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1306
+ >;
+ };
+
+ pinctrl_tpm5: tpm5grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e
+ >;
+ };
+
+ pinctrl_typec: typecgrp {
+ fsl,pins = <
+ MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1306
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX93_PAD_UART2_TXD__LPUART2_TX 0x31e
+ MX93_PAD_UART2_RXD__LPUART2_RX 0x31e
+ MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x31e
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO14__LPUART3_TX 0x31e
+ MX93_PAD_GPIO_IO15__LPUART3_RX 0x31e
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e
+ MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e
+ >;
+ };
+
+ pinctrl_uart8: uart8grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e
+ MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_hs: usdhc2hsgrp {
+ fsl,pins = <
+ /* HYS | PD | PU | FSEL_3 | DSE X5 */
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x17be
+ /* HYS | PD | PU | FSEL_3 | DSE X4 */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
+ /* HYS | PD | PU | FSEL_3 | DSE X3 */
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ /* PD | PU | FSEL_2 | DSE X3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
+ >;
+ };
+
+ pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+ fsl,pins = <
+ /* HYS | PD | PU | FSEL_3 | DSE X6 */
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe
+ /* HYS | PD | PU | FSEL_3 | DSE X4 */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e
+ /* PD | PU | FSEL_2 | DSE X3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
+ >;
+ };
+};
new file mode 100644
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ */
+
+#include "imx93.dtsi"
+
+/{
+ model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM";
+ compatible = "tq,imx93-tqma9352", "fsl,imx93";
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ alloc-ranges = <0 0x60000000 0 0x40000000>;
+ size = <0 0x10000000>;
+ linux,cma-default;
+ };
+ };
+
+ reg_v1v8: regulator-v1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* SD2 RST# via PMIC SW_EN */
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_v3v3>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&adc1 {
+ vref-supply = <®_v1v8>;
+};
+
+&flexspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi1>;
+ status = "okay";
+
+ flash0: flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ /*
+ * no DQS, RXCLKSRC internal loop back, max 66 MHz
+ * clk framework uses CLK_DIVIDER_ROUND_CLOSEST
+ * selected value together with root from
+ * IMX93_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
+ * respect the maximum value.
+ */
+ spi-max-frequency = <62000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&gpio1 {
+ pmic-irq-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "PMIC_IRQ#";
+ };
+};
+
+&lpi2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ pinctrl-1 = <&pinctrl_lpi2c1>;
+ status = "okay";
+
+ se97_som: temperature-sensor@1b {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x1b>;
+ };
+
+ pcf85063: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ quartz-load-femtofarads = <7000>;
+ };
+
+ eeprom0: eeprom@53 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ read-only;
+ vcc-supply = <®_v3v3>;
+ };
+
+ eeprom1: eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ vcc-supply = <®_v3v3>;
+ };
+
+ /* protectable identification memory (part of M24C64-D @57) */
+ eeprom@5f {
+ compatible = "st,24c64", "atmel,24c64";
+ reg = <0x5f>;
+ size = <32>;
+ pagesize = <32>;
+ vcc-supply = <®_v3v3>;
+ };
+
+ imu@6a {
+ compatible = "st,ism330dhcx";
+ reg = <0x6a>;
+ vdd-supply = <®_v3v3>;
+ vddio-supply = <®_v3v3>;
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1>;
+ pinctrl-2 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&wdog3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_flexspi1: flexspi1grp {
+ fsl,pins = <
+ MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x3fe
+ MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x3fe
+ MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x3fe
+ MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x3fe
+ MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x3fe
+ MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x3fe
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_pca9451: pca9451grp {
+ fsl,pins = <
+ MX93_PAD_I2C2_SDA__GPIO1_IO03 0x1306
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x1306
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ /* HYS | PU | PD | FSEL_3 | X5 */
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17be
+ /* HYS | PU | FSEL_3 | X5 */
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x13be
+ /* HYS | PU | FSEL_3 | X4 */
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x139e
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x139e
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x139e
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x139e
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x139e
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x139e
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x139e
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x139e
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
+ >;
+ };
+};