[v4,1/3] drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
Commit Message
Compared to the original PA device, H60PA offers higher bandwidth.
The H60PA is a new device and we use HID to differentiate them.
The events supported by PAv3 and PAv2 are different. They use the
same HID. The PMU version register is used in the driver to
distinguish different versions.
For each H60PA PMU, except for the overflow interrupt register, other
functions of the H60PA PMU are the same as the original PA PMU module.
It has 8-programable counters and each counter is free-running.
Interrupt is supported to handle counter (64-bits) overflow.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
---
drivers/perf/hisilicon/hisi_uncore_pa_pmu.c | 142 +++++++++++++++++---
drivers/perf/hisilicon/hisi_uncore_pmu.h | 9 ++
2 files changed, 136 insertions(+), 15 deletions(-)
Comments
Hi,
This generally looks ok, but I have a few minor comments.
On Fri, Jun 09, 2023 at 03:56:06PM +0800, Junhao He wrote:
> Compared to the original PA device, H60PA offers higher bandwidth.
> The H60PA is a new device and we use HID to differentiate them.
>
> The events supported by PAv3 and PAv2 are different. They use the
> same HID.
That's a bit unfortunate -- doesn't that mean an older kernel that knows about
v2 will try to probe v3 as v2? Presumably things will go wrong if it pokes the
MMIO registers?
I appreciate it may be too late to change that now, but it seems like something
to consider in future (e.g. any changes not backwards compatible with v3 should
use a new HID).
> The PMU version register is used in the driver to
> distinguish different versions.
>
> For each H60PA PMU, except for the overflow interrupt register, other
> functions of the H60PA PMU are the same as the original PA PMU module.
> It has 8-programable counters and each counter is free-running.
> Interrupt is supported to handle counter (64-bits) overflow.
>
> Signed-off-by: Junhao He <hejunhao3@huawei.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
> ---
> drivers/perf/hisilicon/hisi_uncore_pa_pmu.c | 142 +++++++++++++++++---
> drivers/perf/hisilicon/hisi_uncore_pmu.h | 9 ++
> 2 files changed, 136 insertions(+), 15 deletions(-)
> @@ -284,6 +302,15 @@ static int hisi_pa_pmu_init_data(struct platform_device *pdev,
>
> pa_pmu->identifier = readl(pa_pmu->base + PA_PMU_VERSION);
>
> + /* When running on v3 or later, returns the largest version supported */
> + if (pa_pmu->identifier >= HISI_PMU_V3)
> + pa_pmu->dev_info = &pa_pmu_info[2];
> + else if (pa_pmu->identifier == HISI_PMU_V2)
> + pa_pmu->dev_info = &pa_pmu_info[1];
> +
> + if (!pa_pmu->dev_info || !pa_pmu->dev_info->name)
> + return -EINVAL;
> +
Why does this use indices '2' and '1'? What happened to '0'?
It would be a bit clearer with something like:
enum pmu_dev_info_idx {
HISI_PMU_DEV_INFO_V2,
HISI_PMU_DEV_INFO_V3,
NR_HISI_PMU_DEV_INFO
}
Then the above can be:
if (pa_pmu->identifier >= HISI_PMU_V3)
pa_pmu->dev_info = &pa_pmu_info[PMU_DEV_INFO_V3];
else if (pa_pmu->identifier == HISI_PMU_V2)
pa_pmu->dev_info = &pa_pmu_info[PMU_DEV_INFO_V2];
else
return -EINVAL;
if (!pa_pmu->dev_info->name)
return -EINVAL;
... and when you define the dev_info instances:
> +static const struct hisi_pmu_dev_info hisi_h32pa[] = {
> + [1] = {
> + .name = "pa",
> + .attr_groups = hisi_pa_pmu_v2_attr_groups,
> + .private = &hisi_pa_pmu_regs,
> + },
> + [2] = {
> + .name = "pa",
> + .attr_groups = hisi_pa_pmu_v3_attr_groups,
> + .private = &hisi_pa_pmu_regs,
> + },
> + {}
> +};
... you could have:
static const struct hisi_pmu_dev_info hisi_h32pa[NR_HISI_PMU_DEV_INFO] = {
[HISI_PMU_DEV_INFO_V2] = {
.name = "pa",
.attr_groups = hisi_pa_pmu_v2_attr_groups,
.private = &hisi_pa_pmu_regs,
},
[HISI_PMU_DEV_INFO_V3] = {
.name = "pa",
.attr_groups = hisi_pa_pmu_v3_attr_groups,
.private = &hisi_pa_pmu_regs,
},
};
... which would clearly match up with the probe path, and would ensure the
arrays are always correctly sized if there's a v4, etc.
> diff --git a/drivers/perf/hisilicon/hisi_uncore_pmu.h b/drivers/perf/hisilicon/hisi_uncore_pmu.h
> index 07890a8e96ca..a8d6d6905f3f 100644
> --- a/drivers/perf/hisilicon/hisi_uncore_pmu.h
> +++ b/drivers/perf/hisilicon/hisi_uncore_pmu.h
> @@ -24,6 +24,7 @@
> #define pr_fmt(fmt) "hisi_pmu: " fmt
>
> #define HISI_PMU_V2 0x30
> +#define HISI_PMU_V3 0x40
> #define HISI_MAX_COUNTERS 0x10
> #define to_hisi_pmu(p) (container_of(p, struct hisi_pmu, pmu))
>
> @@ -62,6 +63,13 @@ struct hisi_uncore_ops {
> void (*disable_filter)(struct perf_event *event);
> };
>
> +/* Describes the HISI PMU chip features information */
> +struct hisi_pmu_dev_info {
> + const char *name;
> + const struct attribute_group **attr_groups;
> + void *private;
> +};
> +
> struct hisi_pmu_hwevents {
> struct perf_event *hw_events[HISI_MAX_COUNTERS];
> DECLARE_BITMAP(used_mask, HISI_MAX_COUNTERS);
> @@ -72,6 +80,7 @@ struct hisi_pmu_hwevents {
> struct hisi_pmu {
> struct pmu pmu;
> const struct hisi_uncore_ops *ops;
> + const struct hisi_pmu_dev_info *dev_info;
> struct hisi_pmu_hwevents pmu_events;
> /* associated_cpus: All CPUs associated with the PMU */
> cpumask_t associated_cpus;
Will other hisi pmu drivers use the hisi_pmu_dev_info field in future?
I ask because otherwise you could make this local to hisi_uncore_pa_pmu.c if
you structured this as:
struct hisi_pa_pmu {
struct hisi_pmu;
const char *name;
const struct attribute_group **attr_groups;
const struct hisi_pa_pmu_int_regs *regs;
}
... which would give you some additional type-safety.
Thanks,
Mark
Hi, Mark
Thanks for your comments.
On 2023/6/9 16:53, Mark Rutland wrote:
> Hi,
>
> This generally looks ok, but I have a few minor comments.
>
> On Fri, Jun 09, 2023 at 03:56:06PM +0800, Junhao He wrote:
>> Compared to the original PA device, H60PA offers higher bandwidth.
>> The H60PA is a new device and we use HID to differentiate them.
>>
>> The events supported by PAv3 and PAv2 are different. They use the
>> same HID.
> That's a bit unfortunate -- doesn't that mean an older kernel that knows about
> v2 will try to probe v3 as v2? Presumably things will go wrong if it pokes the
> MMIO registers?
>
> I appreciate it may be too late to change that now, but it seems like something
> to consider in future (e.g. any changes not backwards compatible with v3 should
> use a new HID).
Yes, The older PA PMU driver will probe v3 as v2. And the PAv3 PMU removed
some events which are supported by PAv2 PMU. Therefore, the PA events
displayed by "perf list" cannot work properly.
We plan to add new HID for PAv3 PMU in next version.
Thanks.
>> The PMU version register is used in the driver to
>> distinguish different versions.
>>
>> For each H60PA PMU, except for the overflow interrupt register, other
>> functions of the H60PA PMU are the same as the original PA PMU module.
>> It has 8-programable counters and each counter is free-running.
>> Interrupt is supported to handle counter (64-bits) overflow.
>>
>> Signed-off-by: Junhao He <hejunhao3@huawei.com>
>> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
>> ---
>> drivers/perf/hisilicon/hisi_uncore_pa_pmu.c | 142 +++++++++++++++++---
>> drivers/perf/hisilicon/hisi_uncore_pmu.h | 9 ++
>> 2 files changed, 136 insertions(+), 15 deletions(-)
>> @@ -284,6 +302,15 @@ static int hisi_pa_pmu_init_data(struct platform_device *pdev,
>>
>> pa_pmu->identifier = readl(pa_pmu->base + PA_PMU_VERSION);
>>
>> + /* When running on v3 or later, returns the largest version supported */
>> + if (pa_pmu->identifier >= HISI_PMU_V3)
>> + pa_pmu->dev_info = &pa_pmu_info[2];
>> + else if (pa_pmu->identifier == HISI_PMU_V2)
>> + pa_pmu->dev_info = &pa_pmu_info[1];
>> +
>> + if (!pa_pmu->dev_info || !pa_pmu->dev_info->name)
>> + return -EINVAL;
>> +
> Why does this use indices '2' and '1'? What happened to '0'?
>
> It would be a bit clearer with something like:
>
> enum pmu_dev_info_idx {
> HISI_PMU_DEV_INFO_V2,
> HISI_PMU_DEV_INFO_V3,
> NR_HISI_PMU_DEV_INFO
> }
>
> Then the above can be:
>
> if (pa_pmu->identifier >= HISI_PMU_V3)
> pa_pmu->dev_info = &pa_pmu_info[PMU_DEV_INFO_V3];
> else if (pa_pmu->identifier == HISI_PMU_V2)
> pa_pmu->dev_info = &pa_pmu_info[PMU_DEV_INFO_V2];
> else
> return -EINVAL;
>
> if (!pa_pmu->dev_info->name)
> return -EINVAL;
>
> ... and when you define the dev_info instances:
Because of add new HID for PAv3, I'm going to replace the code with the
following:
pa_pmu->dev_info = pa_pmu_info;
>> +static const struct hisi_pmu_dev_info hisi_h32pa[] = {
>> + [1] = {
>> + .name = "pa",
>> + .attr_groups = hisi_pa_pmu_v2_attr_groups,
>> + .private = &hisi_pa_pmu_regs,
>> + },
>> + [2] = {
>> + .name = "pa",
>> + .attr_groups = hisi_pa_pmu_v3_attr_groups,
>> + .private = &hisi_pa_pmu_regs,
>> + },
>> + {}
>> +};
> ... you could have:
>
> static const struct hisi_pmu_dev_info hisi_h32pa[NR_HISI_PMU_DEV_INFO] = {
> [HISI_PMU_DEV_INFO_V2] = {
> .name = "pa",
> .attr_groups = hisi_pa_pmu_v2_attr_groups,
> .private = &hisi_pa_pmu_regs,
> },
> [HISI_PMU_DEV_INFO_V3] = {
> .name = "pa",
> .attr_groups = hisi_pa_pmu_v3_attr_groups,
> .private = &hisi_pa_pmu_regs,
> },
> };
>
> ... which would clearly match up with the probe path, and would ensure the
> arrays are always correctly sized if there's a v4, etc.
and the initialization of the xxx_dev_info structure is as follows:
struct hisi_pmu_dev_info hisi_h32pa_v2 = {
...
}
struct hisi_pmu_dev_info hisi_h32pa_v3 = {
...
}
>
>> diff --git a/drivers/perf/hisilicon/hisi_uncore_pmu.h b/drivers/perf/hisilicon/hisi_uncore_pmu.h
>> index 07890a8e96ca..a8d6d6905f3f 100644
>> --- a/drivers/perf/hisilicon/hisi_uncore_pmu.h
>> +++ b/drivers/perf/hisilicon/hisi_uncore_pmu.h
>> @@ -24,6 +24,7 @@
>> #define pr_fmt(fmt) "hisi_pmu: " fmt
>>
>> #define HISI_PMU_V2 0x30
>> +#define HISI_PMU_V3 0x40
>> #define HISI_MAX_COUNTERS 0x10
>> #define to_hisi_pmu(p) (container_of(p, struct hisi_pmu, pmu))
>>
>> @@ -62,6 +63,13 @@ struct hisi_uncore_ops {
>> void (*disable_filter)(struct perf_event *event);
>> };
>>
>> +/* Describes the HISI PMU chip features information */
>> +struct hisi_pmu_dev_info {
>> + const char *name;
>> + const struct attribute_group **attr_groups;
>> + void *private;
>> +};
>> +
>> struct hisi_pmu_hwevents {
>> struct perf_event *hw_events[HISI_MAX_COUNTERS];
>> DECLARE_BITMAP(used_mask, HISI_MAX_COUNTERS);
>> @@ -72,6 +80,7 @@ struct hisi_pmu_hwevents {
>> struct hisi_pmu {
>> struct pmu pmu;
>> const struct hisi_uncore_ops *ops;
>> + const struct hisi_pmu_dev_info *dev_info;
>> struct hisi_pmu_hwevents pmu_events;
>> /* associated_cpus: All CPUs associated with the PMU */
>> cpumask_t associated_cpus;
> Will other hisi pmu drivers use the hisi_pmu_dev_info field in future?
yes, It is. and the member of private is also a general interface.
If other uncore PMU have private implementations in registers
or other, this member can also be used.
Best regards,
Junhao.
>
> I ask because otherwise you could make this local to hisi_uncore_pa_pmu.c if
> you structured this as:
>
> struct hisi_pa_pmu {
> struct hisi_pmu;
> const char *name;
> const struct attribute_group **attr_groups;
> const struct hisi_pa_pmu_int_regs *regs;
> }
>
> ... which would give you some additional type-safety.
>
> Thanks,
> Mark
>
> .
>
@@ -22,9 +22,15 @@
#define PA_TT_CTRL 0x1c08
#define PA_TGTID_CTRL 0x1c14
#define PA_SRCID_CTRL 0x1c18
+
+/* H32 PA interrupt registers */
#define PA_INT_MASK 0x1c70
#define PA_INT_STATUS 0x1c78
#define PA_INT_CLEAR 0x1c7c
+
+#define H60PA_INT_STATUS 0x1c70
+#define H60PA_INT_MASK 0x1c74
+
#define PA_EVENT_TYPE0 0x1c80
#define PA_PMU_VERSION 0x1cf0
#define PA_EVENT_CNT0_L 0x1d00
@@ -46,6 +52,12 @@ HISI_PMU_EVENT_ATTR_EXTRACTOR(srcid_cmd, config1, 32, 22);
HISI_PMU_EVENT_ATTR_EXTRACTOR(srcid_msk, config1, 43, 33);
HISI_PMU_EVENT_ATTR_EXTRACTOR(tracetag_en, config1, 44, 44);
+struct hisi_pa_pmu_int_regs {
+ u32 mask_offset;
+ u32 clear_offset;
+ u32 status_offset;
+};
+
static void hisi_pa_pmu_enable_tracetag(struct perf_event *event)
{
struct hisi_pmu *pa_pmu = to_hisi_pmu(event->pmu);
@@ -219,44 +231,50 @@ static void hisi_pa_pmu_disable_counter(struct hisi_pmu *pa_pmu,
static void hisi_pa_pmu_enable_counter_int(struct hisi_pmu *pa_pmu,
struct hw_perf_event *hwc)
{
+ struct hisi_pa_pmu_int_regs *regs = pa_pmu->dev_info->private;
u32 val;
/* Write 0 to enable interrupt */
- val = readl(pa_pmu->base + PA_INT_MASK);
+ val = readl(pa_pmu->base + regs->mask_offset);
val &= ~(1 << hwc->idx);
- writel(val, pa_pmu->base + PA_INT_MASK);
+ writel(val, pa_pmu->base + regs->mask_offset);
}
static void hisi_pa_pmu_disable_counter_int(struct hisi_pmu *pa_pmu,
struct hw_perf_event *hwc)
{
+ struct hisi_pa_pmu_int_regs *regs = pa_pmu->dev_info->private;
u32 val;
/* Write 1 to mask interrupt */
- val = readl(pa_pmu->base + PA_INT_MASK);
+ val = readl(pa_pmu->base + regs->mask_offset);
val |= 1 << hwc->idx;
- writel(val, pa_pmu->base + PA_INT_MASK);
+ writel(val, pa_pmu->base + regs->mask_offset);
}
static u32 hisi_pa_pmu_get_int_status(struct hisi_pmu *pa_pmu)
{
- return readl(pa_pmu->base + PA_INT_STATUS);
+ struct hisi_pa_pmu_int_regs *regs = pa_pmu->dev_info->private;
+
+ return readl(pa_pmu->base + regs->status_offset);
}
static void hisi_pa_pmu_clear_int_status(struct hisi_pmu *pa_pmu, int idx)
{
- writel(1 << idx, pa_pmu->base + PA_INT_CLEAR);
-}
+ struct hisi_pa_pmu_int_regs *regs = pa_pmu->dev_info->private;
-static const struct acpi_device_id hisi_pa_pmu_acpi_match[] = {
- { "HISI0273", },
- {}
-};
-MODULE_DEVICE_TABLE(acpi, hisi_pa_pmu_acpi_match);
+ writel(1 << idx, pa_pmu->base + regs->clear_offset);
+}
static int hisi_pa_pmu_init_data(struct platform_device *pdev,
struct hisi_pmu *pa_pmu)
{
+ const struct hisi_pmu_dev_info *pa_pmu_info;
+
+ pa_pmu_info = device_get_match_data(&pdev->dev);
+ if (!pa_pmu_info)
+ return -ENODEV;
+
/*
* As PA PMU is in a SICL, use the SICL_ID and the index ID
* to identify the PA PMU.
@@ -284,6 +302,15 @@ static int hisi_pa_pmu_init_data(struct platform_device *pdev,
pa_pmu->identifier = readl(pa_pmu->base + PA_PMU_VERSION);
+ /* When running on v3 or later, returns the largest version supported */
+ if (pa_pmu->identifier >= HISI_PMU_V3)
+ pa_pmu->dev_info = &pa_pmu_info[2];
+ else if (pa_pmu->identifier == HISI_PMU_V2)
+ pa_pmu->dev_info = &pa_pmu_info[1];
+
+ if (!pa_pmu->dev_info || !pa_pmu->dev_info->name)
+ return -EINVAL;
+
return 0;
}
@@ -314,6 +341,32 @@ static const struct attribute_group hisi_pa_pmu_v2_events_group = {
.attrs = hisi_pa_pmu_v2_events_attr,
};
+static struct attribute *hisi_pa_pmu_v3_events_attr[] = {
+ HISI_PMU_EVENT_ATTR(tx_req, 0x0),
+ HISI_PMU_EVENT_ATTR(tx_dat, 0x1),
+ HISI_PMU_EVENT_ATTR(tx_snp, 0x2),
+ HISI_PMU_EVENT_ATTR(rx_req, 0x7),
+ HISI_PMU_EVENT_ATTR(rx_dat, 0x8),
+ HISI_PMU_EVENT_ATTR(rx_snp, 0x9),
+ NULL
+};
+
+static const struct attribute_group hisi_pa_pmu_v3_events_group = {
+ .name = "events",
+ .attrs = hisi_pa_pmu_v3_events_attr,
+};
+
+static struct attribute *hisi_h60pa_pmu_events_attr[] = {
+ HISI_PMU_EVENT_ATTR(rx_flit, 0x50),
+ HISI_PMU_EVENT_ATTR(tx_flit, 0x65),
+ NULL
+};
+
+static const struct attribute_group hisi_h60pa_pmu_events_group = {
+ .name = "events",
+ .attrs = hisi_h60pa_pmu_events_attr,
+};
+
static DEVICE_ATTR(cpumask, 0444, hisi_cpumask_sysfs_show, NULL);
static struct attribute *hisi_pa_pmu_cpumask_attrs[] = {
@@ -345,6 +398,57 @@ static const struct attribute_group *hisi_pa_pmu_v2_attr_groups[] = {
NULL
};
+static const struct attribute_group *hisi_pa_pmu_v3_attr_groups[] = {
+ &hisi_pa_pmu_v2_format_group,
+ &hisi_pa_pmu_v3_events_group,
+ &hisi_pa_pmu_cpumask_attr_group,
+ &hisi_pa_pmu_identifier_group,
+ NULL
+};
+
+static struct hisi_pa_pmu_int_regs hisi_pa_pmu_regs = {
+ .mask_offset = PA_INT_MASK,
+ .clear_offset = PA_INT_CLEAR,
+ .status_offset = PA_INT_STATUS,
+};
+
+static const struct hisi_pmu_dev_info hisi_h32pa[] = {
+ [1] = {
+ .name = "pa",
+ .attr_groups = hisi_pa_pmu_v2_attr_groups,
+ .private = &hisi_pa_pmu_regs,
+ },
+ [2] = {
+ .name = "pa",
+ .attr_groups = hisi_pa_pmu_v3_attr_groups,
+ .private = &hisi_pa_pmu_regs,
+ },
+ {}
+};
+
+static const struct attribute_group *hisi_h60pa_pmu_attr_groups[] = {
+ &hisi_pa_pmu_v2_format_group,
+ &hisi_h60pa_pmu_events_group,
+ &hisi_pa_pmu_cpumask_attr_group,
+ &hisi_pa_pmu_identifier_group,
+ NULL
+};
+
+static struct hisi_pa_pmu_int_regs hisi_h60pa_pmu_regs = {
+ .mask_offset = H60PA_INT_MASK,
+ .clear_offset = H60PA_INT_STATUS, /* Clear on write */
+ .status_offset = H60PA_INT_STATUS,
+};
+
+static const struct hisi_pmu_dev_info hisi_h60pa[] = {
+ [1] = {
+ .name = "h60pa",
+ .attr_groups = hisi_h60pa_pmu_attr_groups,
+ .private = &hisi_h60pa_pmu_regs,
+ },
+ {}
+};
+
static const struct hisi_uncore_ops hisi_uncore_pa_ops = {
.write_evtype = hisi_pa_pmu_write_evtype,
.get_event_idx = hisi_uncore_pmu_get_event_idx,
@@ -375,7 +479,7 @@ static int hisi_pa_pmu_dev_probe(struct platform_device *pdev,
if (ret)
return ret;
- pa_pmu->pmu_events.attr_groups = hisi_pa_pmu_v2_attr_groups;
+ pa_pmu->pmu_events.attr_groups = pa_pmu->dev_info->attr_groups;
pa_pmu->num_counters = PA_NR_COUNTERS;
pa_pmu->ops = &hisi_uncore_pa_ops;
pa_pmu->check_event = 0xB0;
@@ -400,8 +504,9 @@ static int hisi_pa_pmu_probe(struct platform_device *pdev)
if (ret)
return ret;
- name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "hisi_sicl%u_pa%u",
- pa_pmu->sicl_id, pa_pmu->index_id);
+ name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "hisi_sicl%d_%s%u",
+ pa_pmu->sicl_id, pa_pmu->dev_info->name,
+ pa_pmu->index_id);
if (!name)
return -ENOMEM;
@@ -435,6 +540,13 @@ static int hisi_pa_pmu_remove(struct platform_device *pdev)
return 0;
}
+static const struct acpi_device_id hisi_pa_pmu_acpi_match[] = {
+ { "HISI0273", (kernel_ulong_t)hisi_h32pa },
+ { "HISI0274", (kernel_ulong_t)hisi_h60pa },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, hisi_pa_pmu_acpi_match);
+
static struct platform_driver hisi_pa_pmu_driver = {
.driver = {
.name = "hisi_pa_pmu",
@@ -24,6 +24,7 @@
#define pr_fmt(fmt) "hisi_pmu: " fmt
#define HISI_PMU_V2 0x30
+#define HISI_PMU_V3 0x40
#define HISI_MAX_COUNTERS 0x10
#define to_hisi_pmu(p) (container_of(p, struct hisi_pmu, pmu))
@@ -62,6 +63,13 @@ struct hisi_uncore_ops {
void (*disable_filter)(struct perf_event *event);
};
+/* Describes the HISI PMU chip features information */
+struct hisi_pmu_dev_info {
+ const char *name;
+ const struct attribute_group **attr_groups;
+ void *private;
+};
+
struct hisi_pmu_hwevents {
struct perf_event *hw_events[HISI_MAX_COUNTERS];
DECLARE_BITMAP(used_mask, HISI_MAX_COUNTERS);
@@ -72,6 +80,7 @@ struct hisi_pmu_hwevents {
struct hisi_pmu {
struct pmu pmu;
const struct hisi_uncore_ops *ops;
+ const struct hisi_pmu_dev_info *dev_info;
struct hisi_pmu_hwevents pmu_events;
/* associated_cpus: All CPUs associated with the PMU */
cpumask_t associated_cpus;