[V2,07/14] arm64: dts: ti: k3-j7200-som/common-proc-board: Fixup reference to phandles array
Commit Message
When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle
and cell arguments easier to catch. Fix the outliers to be consistent
with the rest of the usage.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
No changes from V1
V1: https://lore.kernel.org/r/20230601152636.858553-6-nm@ti.com
arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 2 +-
arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
@@ -193,7 +193,7 @@ &wkup_gpio1 {
&mcu_cpsw {
pinctrl-names = "default";
- pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+ pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
};
&davinci_mdio {
@@ -174,25 +174,25 @@ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
};
&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
};
&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+ mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
};
&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+ mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&main_r5fss0_core0_memory_region>;
};
&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+ mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
memory-region = <&main_r5fss0_core1_dma_memory_region>,
<&main_r5fss0_core1_memory_region>;
};