diff mbox series

arm64: dts: imx8mm-venice-gw7901: add SDR50/SDR104 SDIO support for wifi

Message ID 20230606153351.1448596-1-tharvey@gateworks.com
State New
Headers
Series arm64: dts: imx8mm-venice-gw7901: add SDR50/SDR104 SDIO support for wifi |

Commit Message

Tim Harvey June 6, 2023, 3:33 p.m. UTC 
  The GW7901 has a Murata LBEE5H 802.11abgnac / BT5 module based on the
Cypress CYW43455 which supports SDR50/SDR104.

Add dt pinctrl for the 100mhz and 200mhz states to support SDR50/SDR104.

While at it add the dt node for the CYW43455 wifi for the brcmfmac
driver.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 .../dts/freescale/imx8mm-venice-gw7901.dts    | 33 ++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

Comments

Shawn Guo July 17, 2023, 12:12 a.m. UTC | #1 
On Tue, Jun 06, 2023 at 08:33:51AM -0700, Tim Harvey wrote:
> The GW7901 has a Murata LBEE5H 802.11abgnac / BT5 module based on the
> Cypress CYW43455 which supports SDR50/SDR104.
> 
> Add dt pinctrl for the 100mhz and 200mhz states to support SDR50/SDR104.
> 
> While at it add the dt node for the CYW43455 wifi for the brcmfmac
> driver.
> 
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index d022b5807a24..bb78c99c4fb4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -789,12 +789,21 @@  &usbotg2 {
 
 /* SDIO WiFi */
 &usdhc1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <4>;
 	non-removable;
 	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac";
+		reg = <0>;
+	};
 };
 
 /* microSD */
@@ -1054,6 +1063,28 @@  MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
 		>;
 	};
 
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190