[RFC,v1,09/13] wifi: ath10k: Use pci_disable/enable_link_state()
Commit Message
ath10k driver adjusts ASPM state itself which leaves ASPM service
driver in PCI core unaware of the link state changes the driver
implemented.
Call pci_disable_link_state() and pci_enable_link_state() instead of
adjusting ASPMC field in LNKCTL directly in the driver and let PCI core
handle the ASPM state management.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
@@ -1963,9 +1963,8 @@ static int ath10k_pci_hif_start(struct ath10k *ar)
ath10k_pci_irq_enable(ar);
ath10k_pci_rx_post(ar);
- pcie_capability_clear_and_set_word(ar_pci->pdev, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC,
- ar_pci->link_ctl & PCI_EXP_LNKCTL_ASPMC);
+ pci_enable_link_state(ar_pci->pdev, ar_pci->link_ctl &
+ (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1));
return 0;
}
@@ -2822,8 +2821,7 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar,
pcie_capability_read_word(ar_pci->pdev, PCI_EXP_LNKCTL,
&ar_pci->link_ctl);
- pcie_capability_clear_word(ar_pci->pdev, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC);
+ pci_disable_link_state(ar_pci->pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
/*
* Bring the target up cleanly.