diff mbox series

[v2,1/3] dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC

Message ID 20230602084925.215411-2-william.qiu@starfivetech.com
State New
Headers
Series Add initialization of clock for StarFive JH7110 SoC |

Commit Message

William Qiu June 2, 2023, 8:49 a.m. UTC 
  The QSPI controller needs three clock items to work properly on StarFive
JH7110 SoC, so there is need to change the maxItems's value to 3. Other
platforms do not have this constraint.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
---
 .../devicetree/bindings/spi/cdns,qspi-nor.yaml    | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

Comments

Conor Dooley June 2, 2023, 6:02 p.m. UTC | #1 
On Fri, Jun 02, 2023 at 04:49:23PM +0800, William Qiu wrote:
> The QSPI controller needs three clock items to work properly on StarFive
> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
> platforms do not have this constraint.
> 
> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
> ---
>  .../devicetree/bindings/spi/cdns,qspi-nor.yaml    | 15 ++++++++++++---
>  1 file changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> index b310069762dd..b6a27171d965 100644
> --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> @@ -26,6 +26,15 @@ allOf:
>              const: starfive,jh7110-qspi
>      then:
>        properties:
> +        clocks:
> +          maxItems: 3
> +
> +        clock-names:
> +          items:
> +            - const: ref_clk

Aww, I liked Mark's suggestions better.
If you are respinning to fix the LKP reported issue w/ ignoring the result
of enabling the clocks, could you chop the _clk off of this one?

Otherwise,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.
William Qiu June 6, 2023, 3:34 a.m. UTC | #2 
On 2023/6/3 2:02, Conor Dooley wrote:
> On Fri, Jun 02, 2023 at 04:49:23PM +0800, William Qiu wrote:
>> The QSPI controller needs three clock items to work properly on StarFive
>> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
>> platforms do not have this constraint.
>> 
>> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>>  .../devicetree/bindings/spi/cdns,qspi-nor.yaml    | 15 ++++++++++++---
>>  1 file changed, 12 insertions(+), 3 deletions(-)
>> 
>> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> index b310069762dd..b6a27171d965 100644
>> --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> @@ -26,6 +26,15 @@ allOf:
>>              const: starfive,jh7110-qspi
>>      then:
>>        properties:
>> +        clocks:
>> +          maxItems: 3
>> +
>> +        clock-names:
>> +          items:
>> +            - const: ref_clk
> 
> Aww, I liked Mark's suggestions better.
> If you are respinning to fix the LKP reported issue w/ ignoring the result
> of enabling the clocks, could you chop the _clk off of this one?
> 
> Otherwise,
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> 
> Thanks,
> Conor.

Hi Conor,

Thanks for taking time to review this patch series.
About the clock name, I would take Mark's suggestions, and will update it in
next version.

Best regards,
William
Krzysztof Kozlowski June 6, 2023, 12:43 p.m. UTC | #3 
On 02/06/2023 10:49, William Qiu wrote:
> The QSPI controller needs three clock items to work properly on StarFive
> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
> platforms do not have this constraint.
> 
> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>



>  
> @@ -69,9 +81,6 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> -  clocks:
> -    maxItems: 1

Properties should be defined in top-level properties. Don't remove them
from here.

Best regards,
Krzysztof
William Qiu June 19, 2023, 7:27 a.m. UTC | #4 
On 2023/6/6 20:43, Krzysztof Kozlowski wrote:
> On 02/06/2023 10:49, William Qiu wrote:
>> The QSPI controller needs three clock items to work properly on StarFive
>> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
>> platforms do not have this constraint.
>> 
>> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
> 
> 
> 
>>  
>> @@ -69,9 +81,6 @@ properties:
>>    interrupts:
>>      maxItems: 1
>>  
>> -  clocks:
>> -    maxItems: 1
> 
> Properties should be defined in top-level properties. Don't remove them
> from here.
> 
> Best regards,
> Krzysztof
> 
Hi Krzysztof,

Sorry for the late reply. I'll fix it in next version.

Best regards,
William
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
index b310069762dd..b6a27171d965 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -26,6 +26,15 @@  allOf:
             const: starfive,jh7110-qspi
     then:
       properties:
+        clocks:
+          maxItems: 3
+
+        clock-names:
+          items:
+            - const: ref_clk
+            - const: hclk
+            - const: pclk
+
         resets:
           minItems: 2
           maxItems: 3
@@ -38,6 +47,9 @@  allOf:
 
     else:
       properties:
+        clocks:
+          maxItems: 1
+
         resets:
           maxItems: 2
 
@@ -69,9 +81,6 @@  properties:
   interrupts:
     maxItems: 1
 
-  clocks:
-    maxItems: 1
-
   cdns,fifo-depth:
     description:
       Size of the data FIFO in words.