diff mbox series

[v6,8/9] serial: sc16is7xx: add post reset delay

Message ID 20230601201844.3739926-9-hugo@hugovil.com
State New
Headers
Series serial: sc16is7xx: fix GPIO regression and rs485 improvements |

Commit Message

Hugo Villeneuve June 1, 2023, 8:18 p.m. UTC 
  From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Make sure we wait at least 3us before initiating communication with
the device after reset.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
---
 drivers/tty/serial/sc16is7xx.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 388c1d490853..9b2d58023c55 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1521,6 +1521,12 @@  static int sc16is7xx_probe(struct device *dev,
 	regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT,
 			SC16IS7XX_IOCONTROL_SRESET_BIT);
 
+	/*
+	 * After reset, the host must wait at least 3us before initializing a
+	 * communication with the device.
+	 */
+	usleep_range(5, 10);
+
 	for (i = 0; i < devtype->nr_uart; ++i) {
 		s->p[i].line		= i;
 		/* Initialize port data */