[RFC,1/3] clk: renesas: rcar-gen3: Add support for ZG clock
Commit Message
A clock used for the 3D graphics appears to be common
among multiple SoC's, so add a generic gen3 clock
for clocking the graphics.
Signed-off-by: Adam Ford <aford173@gmail.com>
Comments
Hi Adam,
On Tue, May 30, 2023 at 1:21 PM Adam Ford <aford173@gmail.com> wrote:
> A clock used for the 3D graphics appears to be common
> among multiple SoC's, so add a generic gen3 clock
> for clocking the graphics.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
Thanks for your patch!
> --- a/drivers/clk/renesas/rcar-gen3-cpg.c
> +++ b/drivers/clk/renesas/rcar-gen3-cpg.c
> @@ -301,6 +301,39 @@ static struct clk * __init cpg_z_clk_register(const char *name,
> return clk;
> }
>
> +static struct clk * __init cpg_zg_clk_register(const char *name,
> + const char *parent_name,
> + void __iomem *reg,
> + unsigned int div,
> + unsigned int offset)
> +{
> + struct clk_init_data init;
"= {};", as you do not initialize all fields below.
> + struct cpg_z_clk *zclk;
> + struct clk *clk;
> +
> + zclk = kzalloc(sizeof(*zclk), GFP_KERNEL);
> + if (!zclk)
> + return ERR_PTR(-ENOMEM);
> +
> + init.name = name;
> + init.ops = &cpg_z_clk_ops;
> + init.flags = 0;
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> +
> + zclk->reg = reg + CPG_FRQCRB;
> + zclk->kick_reg = reg + CPG_FRQCRB;
> + zclk->hw.init = &init;
> + zclk->mask = GENMASK(offset + 4, offset);
> + zclk->fixed_div = div; /* PLLVCO x 1/div1 x 3DGE divider x 1/div2 */
> +
> + clk = clk_register(NULL, &zclk->hw);
> + if (IS_ERR(clk))
> + kfree(zclk);
> +
> + return clk;
> +}
This new function is very similar to the existing cpg_z_clk_register().
The only differences are:
- init.flags = 0 vs. CLK_SET_RATE_PARENT, which should not matter
much,
- register CPG_FRQCRB vs. CPG_FRQCRC.
So I think it would be good to avoid duplication by adding a register
parameter to cpg_z_clk_register(), to pass the Frequency Control Register
offset to use.
> +
> static const struct clk_div_table cpg_rpcsrc_div_table[] = {
> { 2, 5 }, { 3, 6 }, { 0, 0 },
> };
> @@ -502,6 +535,9 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
> case CLK_TYPE_GEN3_RPCD2:
> return cpg_rpcd2_clk_register(core->name, base + CPG_RPCCKCR,
> __clk_get_name(parent));
> + case CLK_TYPE_GEN3_ZG:
> + return cpg_zg_clk_register(core->name, __clk_get_name(parent),
> + base, core->div, core->offset);
Please insert this right below the CLK_TYPE_GEN3_Z case.
> default:
> return ERR_PTR(-EINVAL);
The rest LGTM.
(Ideally, we wouldn't need a new clock type, and could just use
CLK_TYPE_GEN3_Z. But then we would need to add a new field to struct
cpg_core_clk to store the FRQCR offset, as the .offset field is already
in use, which would increase all clock table sizes a lot. Or we can
encode both register and bit offset in .offset...
All of this needs a big overhaul for switching to of_clk_add_hw_provider()
anyway, so I wouldn't bother for now.)
Gr{oetje,eeting}s,
Geert
@@ -301,6 +301,39 @@ static struct clk * __init cpg_z_clk_register(const char *name,
return clk;
}
+static struct clk * __init cpg_zg_clk_register(const char *name,
+ const char *parent_name,
+ void __iomem *reg,
+ unsigned int div,
+ unsigned int offset)
+{
+ struct clk_init_data init;
+ struct cpg_z_clk *zclk;
+ struct clk *clk;
+
+ zclk = kzalloc(sizeof(*zclk), GFP_KERNEL);
+ if (!zclk)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &cpg_z_clk_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ zclk->reg = reg + CPG_FRQCRB;
+ zclk->kick_reg = reg + CPG_FRQCRB;
+ zclk->hw.init = &init;
+ zclk->mask = GENMASK(offset + 4, offset);
+ zclk->fixed_div = div; /* PLLVCO x 1/div1 x 3DGE divider x 1/div2 */
+
+ clk = clk_register(NULL, &zclk->hw);
+ if (IS_ERR(clk))
+ kfree(zclk);
+
+ return clk;
+}
+
static const struct clk_div_table cpg_rpcsrc_div_table[] = {
{ 2, 5 }, { 3, 6 }, { 0, 0 },
};
@@ -502,6 +535,9 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
case CLK_TYPE_GEN3_RPCD2:
return cpg_rpcd2_clk_register(core->name, base + CPG_RPCCKCR,
__clk_get_name(parent));
+ case CLK_TYPE_GEN3_ZG:
+ return cpg_zg_clk_register(core->name, __clk_get_name(parent),
+ base, core->div, core->offset);
default:
return ERR_PTR(-EINVAL);
@@ -22,6 +22,7 @@ enum rcar_gen3_clk_types {
CLK_TYPE_GEN3_R,
CLK_TYPE_GEN3_MDSEL, /* Select parent/divider using mode pin */
CLK_TYPE_GEN3_Z,
+ CLK_TYPE_GEN3_ZG,
CLK_TYPE_GEN3_OSC, /* OSC EXTAL predivider and fixed divider */
CLK_TYPE_GEN3_RCKSEL, /* Select parent/divider using RCKCR.CKSEL */
CLK_TYPE_GEN3_RPCSRC,