diff mbox series

[16/20] interconnect: qcom: qcm2290: Hook up RPM bus clk definitions

Message ID 20230526-topic-smd_icc-v1-16-1bf8e6663c4e@linaro.org
State New
Headers
Series Restructure RPM SMD ICC |

Commit Message

Konrad Dybcio May 30, 2023, 10:20 a.m. UTC 
  Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/qcm2290.c | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Dmitry Baryshkov June 1, 2023, 10:11 a.m. UTC | #1 
On 30/05/2023 13:20, Konrad Dybcio wrote:
> Assign the necessary definitions to migrate to the new bus clock
> handling mechanism.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   drivers/interconnect/qcom/qcm2290.c | 6 ++++++
>   1 file changed, 6 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/qcm2290.c b/drivers/interconnect/qcom/qcm2290.c
index cb636e67a5a4..2c7a76fab83c 100644
--- a/drivers/interconnect/qcom/qcm2290.c
+++ b/drivers/interconnect/qcom/qcm2290.c
@@ -1196,6 +1196,7 @@  static const struct qcom_icc_desc qcm2290_bimc = {
 	.type = QCOM_ICC_BIMC,
 	.nodes = qcm2290_bimc_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_bimc_nodes),
+	.bus_clk_desc = &bimc_clk,
 	.regmap_cfg = &qcm2290_bimc_regmap_config,
 	/* M_REG_BASE() in vendor msm_bus_bimc_adhoc driver */
 	.qos_offset = 0x8000,
@@ -1251,6 +1252,7 @@  static const struct qcom_icc_desc qcm2290_cnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = qcm2290_cnoc_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_cnoc_nodes),
+	.bus_clk_desc = &bus_1_clk,
 	.regmap_cfg = &qcm2290_cnoc_regmap_config,
 };
 
@@ -1292,6 +1294,7 @@  static const struct qcom_icc_desc qcm2290_snoc = {
 	.type = QCOM_ICC_QNOC,
 	.nodes = qcm2290_snoc_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_snoc_nodes),
+	.bus_clk_desc = &bus_2_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
 	/* Vendor DT node fab-sys_noc property 'qcom,base-offset' */
 	.qos_offset = 0x15000,
@@ -1306,6 +1309,7 @@  static const struct qcom_icc_desc qcm2290_qup_virt = {
 	.type = QCOM_ICC_QNOC,
 	.nodes = qcm2290_qup_virt_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_qup_virt_nodes),
+	.bus_clk_desc = &qup_clk,
 };
 
 static struct qcom_icc_node * const qcm2290_mmnrt_virt_nodes[] = {
@@ -1319,6 +1323,7 @@  static const struct qcom_icc_desc qcm2290_mmnrt_virt = {
 	.type = QCOM_ICC_QNOC,
 	.nodes = qcm2290_mmnrt_virt_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_mmnrt_virt_nodes),
+	.bus_clk_desc = &mmaxi_0_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
 	.qos_offset = 0x15000,
 };
@@ -1333,6 +1338,7 @@  static const struct qcom_icc_desc qcm2290_mmrt_virt = {
 	.type = QCOM_ICC_QNOC,
 	.nodes = qcm2290_mmrt_virt_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_mmrt_virt_nodes),
+	.bus_clk_desc = &mmaxi_1_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
 	.qos_offset = 0x15000,
 };