diff mbox series

[v2] arm64: dts: imx8mp-msc-sm2s: Add sound card

Message ID	20230525104755.286282-1-luca.ceresoli@bootlin.com
State	New
Headers	Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; From: Luca Ceresoli <luca.ceresoli@bootlin.com> To: devicetree@vger.kernel.org Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2] arm64: dts: imx8mp-msc-sm2s: Add sound card Date: Thu, 25 May 2023 12:47:55 +0200 Message-Id: <20230525104755.286282-1-luca.ceresoli@bootlin.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	[v2] arm64: dts: imx8mp-msc-sm2s: Add sound card \| [v2] arm64: dts: imx8mp-msc-sm2s: Add sound card

Commit Message

Luca Ceresoli May 25, 2023, 10:47 a.m. UTC

  The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
NXP SGTL5000 audio codec connected to I2S-0 (sai2).

This requires to:

 * add the power supplies (always on)
 * enable sai2 with pinmuxes
 * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
   IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

---

Changed in v2:

 - switch to simple-audio-card
 - fix typo in commit message
 - no underscores in node names
 - rename "sgtl5000-sound" node to "sound"
---
 .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)


base-commit: efdde75fee54667153a5fa236907b55452fddbfa

Comments

Shawn Guo May 27, 2023, 1:21 p.m. UTC | #1

On Thu, May 25, 2023 at 12:47:55PM +0200, Luca Ceresoli wrote:
> The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
> NXP SGTL5000 audio codec connected to I2S-0 (sai2).
> 
> This requires to:
> 
>  * add the power supplies (always on)
>  * enable sai2 with pinmuxes
>  * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
>    IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate
> 
> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> 
> ---
> 
> Changed in v2:
> 
>  - switch to simple-audio-card
>  - fix typo in commit message
>  - no underscores in node names
>  - rename "sgtl5000-sound" node to "sound"
> ---
>  .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 70 +++++++++++++++++++
>  1 file changed, 70 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> index 470ff8e31e32..cd651e1e3262 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> @@ -14,6 +14,67 @@ / {
>  	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
>  		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
>  		     "fsl,imx8mp";
> +
> +	reg_vcc_3v3_audio: 3v3-audio-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC_3V3_AUD";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_vcc_1v8_audio: 1v8-audio-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC_1V8_AUD";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "sgtl5000-audio";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,frame-master = <&codec_dai>;
> +		simple-audio-card,bitclock-master = <&codec_dai>;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&sai2>;
> +		};
> +
> +		codec_dai: simple-audio-card,codec {
> +			sound-dai = <&sgtl5000>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	sgtl5000: sgtl5000@a {

audio-codec for node name.

Shawn

> +		compatible = "fsl,sgtl5000";
> +		reg = <0x0a>;
> +
> +		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>;
> +		assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
> +		assigned-clock-rates = <24000000>;
> +		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
> +		clock-names = "mclk";
> +		#sound-dai-cells = <0>;
> +
> +		VDDA-supply  = <&reg_vcc_3v3_audio>;
> +		VDDD-supply  = <&reg_vcc_1v8_audio>;
> +		VDDIO-supply = <&reg_vcc_1v8_audio>;
> +	};
> +};
> +
> +/* I2S-0 = sai2 */
> +&sai2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai2>;
> +
> +	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
> +	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> +	assigned-clock-rates = <12288000>;
> +
> +	fsl,sai-mclk-direction-output;
> +	status = "okay";
>  };
>  
>  &flexcan1 {
> @@ -32,6 +93,15 @@ &iomuxc {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_smarc_gpio>;
>  
> +	pinctrl_sai2: sai2grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
> +			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK    0xd6
> +			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
> +			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
> +		>;
> +	};
> +
>  	pinctrl_smarc_gpio: smarcgpiosgrp {
>  		fsl,pins =
>  			<MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x19>, /* GPIO0 */
> 
> base-commit: efdde75fee54667153a5fa236907b55452fddbfa
> -- 
> 2.34.1
>

diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index 470ff8e31e32..cd651e1e3262 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -14,6 +14,67 @@  / {
 	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
 		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
 		     "fsl,imx8mp";
+
+	reg_vcc_3v3_audio: 3v3-audio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_AUD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8_audio: 1v8-audio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_AUD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,bitclock-master = <&codec_dai>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>;
+		assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		VDDA-supply  = <&reg_vcc_3v3_audio>;
+		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDIO-supply = <&reg_vcc_1v8_audio>;
+	};
+};
+
+/* I2S-0 = sai2 */
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+
+	fsl,sai-mclk-direction-output;
+	status = "okay";
 };
 
 &flexcan1 {
@@ -32,6 +93,15 @@  &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_smarc_gpio>;
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK    0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+		>;
+	};
+
 	pinctrl_smarc_gpio: smarcgpiosgrp {
 		fsl,pins =
 			<MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x19>, /* GPIO0 */