diff mbox series

[1/4] arm64: dts: qcom: pm8550: add PWM controller

Message ID 20230525-topic-sm8550-upstream-pm8550-lpg-dt-v1-1-4d5d7602f290@linaro.org
State New
Headers
Series arm64: qcom: sm8550: enable PMIC devices |

Commit Message

Neil Armstrong May 25, 2023, 3:47 p.m. UTC 
  Add the PWM function to the pm8550 dtsi, this is usually used
to drive RGB leds on platforms using this PMIC.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm8550.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Konrad Dybcio May 26, 2023, 7:50 p.m. UTC | #1 
On 25.05.2023 17:47, Neil Armstrong wrote:
> Add the PWM function to the pm8550 dtsi, this is usually used
> to drive RGB leds on platforms using this PMIC.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm8550.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
> index 33f357a80636..db3d5c17a77d 100644
> --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
> @@ -61,5 +61,15 @@ pm8550_flash: led-controller@ee00 {
>  			reg = <0xee00>;
>  			status = "disabled";
>  		};
> +
> +		pm8550_pwm: pwm {
> +			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
> +
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#pwm-cells = <2>;
> +
> +			status = "disabled";
> +		};
>  	};
>  };
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index 33f357a80636..db3d5c17a77d 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -61,5 +61,15 @@  pm8550_flash: led-controller@ee00 {
 			reg = <0xee00>;
 			status = "disabled";
 		};
+
+		pm8550_pwm: pwm {
+			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
 	};
 };