[2/2] can: esd_usb: Use consistent prefix ESD_USB_ for macros
Commit Message
Rename the following macros:
- ESD_RTR to ESD_USB_RTR
- ESD_EV_CAN_ERROR_EXT to ESD_USB_EV_CAN_ERROR_EXT
Additionally remove the double newline trailing to definition
of ESD_USB_RTR.
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
---
drivers/net/can/usb/esd_usb.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
@@ -43,8 +43,7 @@ MODULE_LICENSE("GPL v2");
#define ESD_USB_CMD_IDADD 6 /* also used for IDADD_REPLY */
/* esd CAN message flags - dlc field */
-#define ESD_RTR BIT(4)
-
+#define ESD_USB_RTR BIT(4)
/* esd CAN message flags - id field */
#define ESD_USB_EXTID BIT(29)
@@ -52,7 +51,7 @@ MODULE_LICENSE("GPL v2");
#define ESD_USB_IDMASK GENMASK(28, 0)
/* esd CAN event ids */
-#define ESD_EV_CAN_ERROR_EXT 2 /* CAN controller specific diagnostic data */
+#define ESD_USB_EV_CAN_ERROR_EXT 2 /* CAN controller specific diagnostic data */
/* baudrate message flags */
#define ESD_USB_LOM BIT(30) /* Listen Only Mode */
@@ -228,7 +227,7 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
struct sk_buff *skb;
u32 id = le32_to_cpu(msg->rx.id) & ESD_USB_IDMASK;
- if (id == ESD_EV_CAN_ERROR_EXT) {
+ if (id == ESD_USB_EV_CAN_ERROR_EXT) {
u8 state = msg->rx.ev_can_err_ext.status;
u8 ecc = msg->rx.ev_can_err_ext.ecc;
@@ -341,13 +340,13 @@ static void esd_usb_rx_can_msg(struct esd_usb_net_priv *priv,
}
cf->can_id = id & ESD_USB_IDMASK;
- can_frame_set_cc_len(cf, msg->rx.dlc & ~ESD_RTR,
+ can_frame_set_cc_len(cf, msg->rx.dlc & ~ESD_USB_RTR,
priv->can.ctrlmode);
if (id & ESD_USB_EXTID)
cf->can_id |= CAN_EFF_FLAG;
- if (msg->rx.dlc & ESD_RTR) {
+ if (msg->rx.dlc & ESD_USB_RTR) {
cf->can_id |= CAN_RTR_FLAG;
} else {
for (i = 0; i < cf->len; i++)
@@ -767,7 +766,7 @@ static netdev_tx_t esd_usb_start_xmit(struct sk_buff *skb,
msg->tx.id = cpu_to_le32(cf->can_id & CAN_ERR_MASK);
if (cf->can_id & CAN_RTR_FLAG)
- msg->tx.dlc |= ESD_RTR;
+ msg->tx.dlc |= ESD_USB_RTR;
if (cf->can_id & CAN_EFF_FLAG)
msg->tx.id |= cpu_to_le32(ESD_USB_EXTID);